• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.138-149
• /
• 1986

본 연구에서는 위의 방법을 수정 발전시켜 완전확립된 난류유동과 열전달장을 해석하였다. 본 연구에서 해석한 유동장은 Fig.3과 같이 내관 외면에 직사각형 인공 조도를 갖고 외관은 매끈한 이중동심원관내의 유동이며, 해의 정확성을 높이기 위하여 Leschziner & Rodi의 유선곡률모델을 수정보완하여 사용하였으며 수치해석의 오류확산 을 감소시키기 위하여 QUICK 해법을 사용하였다.

• Journal of the Optical Society of Korea
• /
• 제9권4호
• /
• pp.140-144
• /
• 2005

In this paper we have investigated the guiding properties of photonic crystal fibers (PCFs) with a square-lattice of air-holes in the cladding. We have shown numerical results of PCFs with various air hole sizes and hole-to-hole spacings over a wide wavelength range. The group velocity dispersion, effective area and effective refractive index of PCF have been calculated numerically. The waveguide dispersion has greatly affected the group velocity dispersion when hole-to-hole spacing is about $1{\mu}m$. The effective area is quite flat over the wide spectral range whether the hole-to-hole spacing is large or ratio of diameter to pitch is large. From the field distribution, we found that the field is tightly confined within the core region of PCF when the pitch is $3{\mu}m$ and the air-filling fraction is 0.9.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.335-339
• /
• 2003

The estimation of seawater intrusion into deep aquifers has been becoming an important subject in terms of site characterization for geological disposal of radioactive waste. Conventional direct-current resistivity methods have been used for ground water explorations and recently have been applied to environmental problems. However, electromagnetic methods are more practical and useful for such a deep investigation. We consider audio-frequency magnetotelluric (AMT) and surface-to-borehole electromagnetic (EM) tomography methods as promising tools for the investigation of deep aquifer. These methods were tested in the Hasunuma area, Chiba Prefecture, Japan. Although the study area is in an urban area, high-quality AMT data were acquired, which was mainly accomplished by night-time data recording and remote-reference data processing. One-dimensional inversion results of the AMT data revealed two extremely conductive zones, which is consistent with the electrical conductivity profile of pore water in core samples. It can be interpreted as the seawater intrusions into both zones. However, the chemical analysis of the groundwater sampled in the deep zone suggests that this groundwater must be fossil seawater that had been confined during sedimentation processes. In addition, the permeability coefficient of the deep layer is very low. Thus the deep conductive zone corresponds to the fossil seawater regarded as being difficult to flow.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.36-41
• /
• 1998

This study is mainly intended to understand on the plan change of a public room in the apartment. This study is summarized as follows; First how the plane type of an apartment public room in the Capital region has been changed since 1970's in which industrialization has seriously started. Second according to the adjoining types how the features of an apartment plan would be divided into some categories. Third how usable area and public area in an apartment has been changed, The scop of this study is limited to the national standard houses of which usable area is 40-85m2(12.1-25.7pyong) built in Seoul and five new cities from 1970's to the half of 1990's The study is based on documents of 1378 samples extracted classified and analysed the plan in the chronical order. The analysis scope is confined to family's public rooms in an apartment such as a living room a dining room and a kitchen. In conclusion the public rooms such as a living room a dining room, and a kitchen become stereotyped with no specific difference in Korean apartments. Especially LDK type, L/DK type is the most general plan in Korean apartments, and the demand of that type is continuously increasing lately.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.93-98
• /
• 2016

Cold plasma and heat treatment were selected as technologies to reduce unburned carbon in fly ash to less than 1.0%. Both cold plasma and heat treatment made it possible to eliminate unburned carbon to less than 1.0%. In the case of fly ash, which almost entirely eliminated unburned carbon with an ignition loss of 0.5%, heat treatment caused adhesion among particles and the BET specific surface area rapidly decreased as the mean particle size increased. On the other hand, with cold plasma, unburned carbon elimination caused the BET specific surface area to decrease and, as no adhesion occurred among particles, the mean particle size became small. Also, cold plasma treatment allowed small spherical particles confined within the unburned carbon particles to be released with the elimination of the unburned carbon frame, so that the quantity of fine particles had a tendency to slightly increase.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.112-115
• /
• 2004

Bond between reinforcing bar and surrounding concrete is supposed to transfer load safely in the process of design of reinforced concrete structures. Bond failure of reinforcing bar generally take place by splitting of the concrete cover as bond force between concrete and reinforcing bars exceeds the confinement of the concrete cover and reinforcement. However, the confinement force has a limitation. Thus, the only variable is the bearing angle corresponding to the change of bond force. Higher rib height bars possessing higher shearing resistance can maintain higher bearing angle and higher splitting resistance when bars are highly confined, and consequently higher bond strength, than lower rib higher bars. In this study, from the evaluate bond strength of high Relative Rib Area Bars Using beam-end test specimens are compared with the current provisions for development of reinforcement, and the improved design method of bond strength is proposed.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.25-29
• /
• 2006

Vertical growth of iridium-catalyzed carbon nanofibers could be selectively grown on the MgO substrate using microwave plasma-enhanced chemical vapor deposition method. Growth positions of the iridium-catalyzed carbon nanofibers on the MgO substrate could be manipulated according to the applied bias voltage. At-150 V, the carbon nanofibers growth was confined only at the corner area of the substrate. Based on these results, we discussed the cause for the confinement of the vertically grown carbon nanofibers on the specific area of the MgO substrate as a function of the applied bias voltage.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.13-23
• /
• 2005

연직배수공법은 연약지반과 준설매립지반의 압밀을 촉진시키고, 강도를 증진시키는데 가장 널리 사용되는 공법중의 하나이다. 토목섬유로 제작된 연직배수재(PVD)를 활용하여 지지력이 부족한 지반을 개량하는 경우, 배수재의 통수능력이 매우 중요한 요인으로 작용한다. 일반적으로 통수능력 실험은 고무 멤브레인으로 구속압력을 가하여 행해지고 있으나, 이는 현장에서 발생할 수 있는 여러 통수능력 저하 영향인자를 충분히 반영하지 못하고 있는 실정이다. 현장조건에서 연직배수재는 해성점토나 실트질 사질토에 의해서 구속되어 배수재가 휘어지거나, 접히거나 하여 배수성능이 저하되기 때문이다. 따라서, 본 연구에서는 연직배수재를 활용하여 연약지반을 개량할 경우 현장조건을 고려한 통수능력을 평가하기 위하여 소형 통수능력 실험장치와 대형 통수능력 실험장치를 이용하여 배수재, 토사종류 및 측압, 상재하중, 동수경사의 실험조건을 설정하여, 연직배수재의 종방향 통수능력 실험을 수행하였다. 분석 결과, 배수재 종류에 따른 통수능력은 포켓식 배수재가 접착식에 비하여 크게 도출되었다. 토사종류에 따른 통수능력은 점토보다 준설토지반에서 더 크며, 하중과 동수경사, 가압시간의 증가에 따라 통수능력이 감소하는 것으로 나타났다. 포켓식 배수재가 점토지반에 타입되었을 경우, 하모니카형 코어를 가진 배수재가 요철형보다 통수능력이 크며, 준설토 지반에 타입된 경우에는 초기 배수면적비와 통수능력비가 거의 비례하는 것으로 나타났다.

• 동의생리병리학회지
• /
• 제21권6호
• /
• pp.1569-1575
• /
• 2007

In oriental medicine, Sukjihwang (SJH, Rehmanniae radix preparat) has been used as one of the key ingredients for the prescription of several herbal decoctions and applied clinically for the treatment of several diseases including nervous system and cardiovascular disease. Here, possible growth-promoting effects of SJH on injured spinal cord axons were investigated in the rats. SJH administration increased levels of active form of ERK1/2 protein and Cdc2 proteins in the injured spinal cord tissue. Anterograde DiI-tracing of corticospinal tract axons showed that SJH-treatment enhanced axonal arborization in the injury area and extensive axonal extension into the caudal area. In SJH-treated group, glial scar formed after spinal cord injury was confined in a smaller area compared to the control group, and the trabecula structure was well observed within the injury cavity. Furthermore, increased proliferation and migration of astrocytes in the injury cavity were observed by SJH treatment. Thus, these present data provide a biological evidence on potential importance of SJH therapy for the treatment of injured spinal cord.

• 자원환경지질
• /
• 제6권3호
• /
• pp.133-170
• /
• 1973

The metamorphosed belt on cherty and andesitic rocks of the Gyeongnam province area has been well known as the most important copper matallogenetic province in Korea and locally has been investigated by several geologists. This report is summarized about geology, occurrence of ore deposits, the study of the present status of mine developments and exploitations and the suggestions of future proposed of copper mine developments and harmoniously and reseonably planning of demands and supply of copper ore. For convenience of study the writer divided the survey region as 4 areas, according to the conditions of mine location. They are (1) Goseong copper area (2) Gunbuk-Haman copper area (3) Masan-Changwon copper area (4) Tongrae-Ilgwang copper area. The geology of the above 4 areas consits of Cretaceous Gyongsang System, which is divided into Silla series, Nakdong Series and Bulguksa Series. The former has intrusive and extrusive andesite and sedimentary formation, and the latter has dioritic and hornblende granite. Ore deposits which is mostly vein types are confined mostly in the andesite and cherty rocks of Silla and Nakdong Series. It is observed slight hydrothermal alteration, i. e. propylitization, chloritization, saussuritization and silicification. It seems that the ore was formed by hydrothermal solution and secondary enrichement. The ore minerals are mainly chalcopyrite and pyrite, with small amounts of malachite, azurite, chalcocite, cuprite, galena, and sphalerite, magnetite, tetrahedrite and etc.. The efficient plan of copper mine developments in surveyed region are as following; (a) Gyeongnam Copper districts are divided in 4 area as mentioned above. (b) Each area would be likely developed as group-working as one unit. For the sufficiently supplying a demand of electric copper, the importations of high grade copper ore in foreign country are invitable at present status of copper mine developments and exploitations.