• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.307-312
• /
• 2005

In this paper, the broadband FCMA(Folded Cross Monopole Antenna), which is the cross monopole antenna with the folded element, is presented. To investigate the broadband characteristics of FCMA the VSWR, the gain, and the radiation pattern are calculated in frequency between 1.75 GHz and 2.655 GHz. From the calculated result, it is shown that the presented folded cross monopole antenna has a excellent band characteristics than the existing cross monopole antenna. The presented antenna is conformed as a broadband antenna which can be used for the indoor antenna of PCS, WCDMA, Wibro, and satellite DMB band.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.173-176
• /
• 2000

In This paper, a novel broadband monopole antenna is investigated experimentally. Our broadband monopole antenna yields the largest bandwidth from 1.72 ∼ 2.2 GHz ( 24.2 ％ ) for VSWR<1.2 So, this antenna can be designed to extend enough the coverage of dual band(PCS＋IMT-2000). The measurements and computations are confirmed to operating of the our broadband antenna, whose electrical characteristics have an attractive feature as handset communication applications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.204-209
• /
• 2005

A small size broadband microstrip patch antenna with small ground plane has been fabricated using MEMS. Multiple layer substrates are used to realize small size and broadband characteristics. The microstrip patch is divided into 3 pieces and each patch is connected to each other using a metal microstrip line. The fabrication process is simple and only one mask is needed. Two types of microtrip antennas are fabricated. Type A is the micros trip antenna with metal lines and type B is the microstrip antenna without metal lines. The size of proposed microstip antenna is $8^{*}12^{*}2mm^{3}$ and the experimental results show that the antenna type A and type B have the bandwidth of 420 MHz at 5.3 GHz and 480 MHz at 5.66 GHz, respectively.

• 정보통신설비학회논문지
• /
• 제5권1호
• /
• pp.43-59
• /
• 2006

A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• 정보통신설비학회논문지
• /
• 제7권1호
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.210-213
• /
• 2001

본 논문에서는 광대역 동작을 위한 나비형 안테나의 임피던스 특성을 분석했다. 펄스 표면하 레이더는 지중 매설물에 대한 정보를 수집하기 위하여 임펄스를 사용하므로, 이러한 임펄스의 광대역 특성으로 인하여 급전점에서 발생하는 반사를 최소화할 수 있도록 광대역 정합 특성을 가진 안테나가 사용되어진다. 따라서, 본 논문에서는 광대역 특성을 가지는 나비형 안테나를 Ensemble 5.0으로 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.227-233
• /
• 2011

This paper describes the development of a broadband quasi-Yagi antenna using a folded dipole driver. The antenna is designed on a low-permittivity substrate to reduce the surface wave effect, and hence the gain can be enhanced easily by adding directors. The folded dipole driver is connected to a 50-${\Omega}$ microstripline via a simple broadband microstrip-to-coplanar stripline transition with a quarter radial stub. The key motivation for the use of a folded dipole is to increase the input impedance at the driver, allowing a smaller mismatch loss between the antenna driver and the coplanar stripline feed. The proposed antenna has a measured bandwidth of 4.67~6.26 GHz for the -10 dB reflection coefficient, and a flat gain of 4.86~5.15 dB within the bandwidth.

• Journal of electromagnetic engineering and science
• /
• 제19권2호
• /
• pp.115-121
• /
• 2019

This paper presents the effects of the position of the split of a split-ring resonator (SRR) on the performance of a composite broadband printed dipole antenna. The antenna is made of two printed dipole arms enclosed by two rectangular and identically printed SRRs. One dipole arm and the SRR are printed on the top side of the substrate, while the other dipole arm and SRR are printed on the bottom side of the same substrate. By changing the position of the split on the SRR, different antenna characteristic values are obtained, namely, for impedance bandwidth and radiation patterns. The split position is thus a critical parameter in antenna design, because it influences the antenna's major performance immensely. Different split positions and their consequences for antenna performance are demonstrated and discussed. The antenna generates linearly polarized radiations, and it is computationally characterized for broadband characteristics. The optimized compact antenna has overall dimensions of 9.6 mm × 74.4 mm × 0.508 mm (0.06λ × 0.469λ × 0.0032λ at 1.895 GHz) with a measured fractional bandwidth of 60.31% (1.32 to 2.46 GHz for |S₁₁| <-10 dB) and a radiation efficiency of >88%.

• 대한전자공학회논문지TC
• /
• 제41권8호
• /
• pp.87-92
• /
• 2004

본 논문에서는 포크 모양의 급전선로를 갖는 마이크로스트립 슬롯 안테나를 설계하고 제작하였다. 폭이 넓은 슬롯 안테나의 광대역 특성을 얻기 위해 급전선로를 포크 모양으로 변형하고, 슬롯의 크기와 옵셋 간격을 조정하였다. 이러한 설계 변수 변화에 따른 마이크로스트립 슬롯 안테나의 특성을 분석하여 광대역 마이크로스트립 슬롯 안테나를 설계하였다. 포크 모양의 급전선로를 갖는 마이크로스트립 슬롯 안테나를 제작하여 측정한 결과, VSWR≤2에 대해서 1.65 GHz에서 6.20 GHz까지의 광대역특성이 얻어졌다.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.135-141
• /
• 2020

본 논문은 다양하게 적용 가능한 슬리브 구조를 갖는 모노폴 안테나 자료를 정리한 것이다. 슬리브 모노폴 안테나는 광대역 특성을 갖고 다주파수용으로 사용된다. 슬리브 모노폴 안테나는 복사기(radiator)인 수직 도체부분과 동축 케이블과 같은 구조를 갖는 슬리브(sleeve)로 구성되어져 있다. 슬리브는 복사기와 개방 스터브 동작을 한다. 슬리브 길이는 안테나 전체 길이의 1/3~2/3로 되어야 한다. 슬리브 구조를 갖는 모노폴 안테나는 차량용 와이퍼 안테나에 적용 가능하다. 더불어, 로딩 코일을 이용한 광대역 슬리브 안테나, ISM 밴드용 광대역 프린티드 슬리브 모노폴 안테나, 갭 슬리브와 이중 슬리브, 하프 커팅을 이용한 UWB 평면형 모노폴 안테나에 적용한 사례를 구조와 광대역 측면에서 정리 분석하였다.