• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.105.6-105
• /
• 2002

Contents 1We developed a new type of lower part of the human-sized BWR (biped walking robot) driven by a new actuator based on the ball screw which has high strength and high gear ratio. Each leg of the robot is composed of three pitch Joints and one roll joint. In all, a 8 degree-of-freedom robot was developed. A new type of actuator for the robot is proposed, which is composed of four bar link mechanism driven by the ball screw. The BWR was designed to walk autonomously by adapting small DC motors for the robot actuators and has an embeded controller system including host computer, batteries and motor drivers. In the performance test, we had basic stable walking data so far, but we f...

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.2
• /
• pp.148-155
• /
• 2008

This paper proposes a method of adaptively generating a gait pattern of biped robot. The gait synthesis is based on human's gait pattern analysis. The proposed method can easily be applied to generate the natural and stable gait pattern of any biped robot. To analyze the human's gait pattern, sequential images of the human's gait on the sagittal plane are acquired from which the gait control values are extracted. The gait pattern of biped robot on the sagittal plane is adaptively generated by a genetic algorithm using the human's gait control values. However, gait trajectories of the biped robot on the sagittal plane are not enough to construct the complete gait pattern because the biped robot moves on 3-dimension space. Therefore, the gait pattern on the frontal plane, generated from Zero Moment Point (ZMP), is added to the gait one acquired on the sagittal plane. Consequently, the natural and stable walking pattern for the biped robot is obtained, as proved by the experiments.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.304-306
• /
• 2001

This paper presents the obstacle avoidance of a biped walking robot using GA-Fuzzy algorithm. In the case of our previous studies the surface has been assumed to be flat. For the case of the environment with obstacles, however, the walking robot might be unnatural. Thus, we considered the surface contained obstacles that the robot can pass through. We propose the optimal leg trajectory data-base by using genetic algorithm and optimal leg trajectory movement about obstacles that exist in front of the robot using fuzzy approach. It is shown that the robot can move more naturally on the surface that contains obstacles.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.139-146
• /
• 2002

We developed a motion capture system to utilize informations on the human walking motion. The system is composed of the mechanical and electronic devices to obtain the joint angle data and the software to analyze the obtained data and to transform the data into the input for a biped walking robot. The mechanical system is composed of a pair of links with 3 revolute joints, on which potentiometers are attached on joint axes to sense rotation angles. Analog signals from potentiometers are transformed into the digital data through the low pass filter and the A/D converter, and then which are stored at the computer. We analyzed the walking characteristics by applying FFT to the digital data, and then performed a 3-D computer simulation using the data. Finally, We apply the processed data to a biped walking robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.137.3-137
• /
• 2001

Many locomotion purpose robots are being built and are under research such as mobile manipulator and biped humanoid robot, etc. Dynamic posture stability of these robots is based on the ZMP point. For getting stable ZMP trajectory, some method has been developed but is too complex and time consuming which leads to inability in generating on-line ZMP trajectory. In this paper, we give a qualitative study about behavior of ZMP in biped walking robot through visualization. This result gives intuitive understanding about behavior of ZMP under various robot state.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2132-2137
• /
• 2005

This paper is concerned with computer simulations of a biped robot walking in dynamic gaits. To this end, a three-dimensional robot is considered possessing a torso and two identical legs of a kinematically ingenious design. Specific walking patterns are off-line generated meeting stability based on the ZMP condition. Subsequently, to verify whether the robot can walk as planned, a multi-body dynamics CAE code has been applied to the corresponding joint motions determined by inverse kinematics. In this manner, complex mass effects could be accurately evaluated for the robot model. As a result, key parameters to successful gaits are identified including inherent characteristics as well. Also, joint actuator capacities are found required to carry out those gaits.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.4
• /
• pp.245-254
• /
• 2014

In this paper, stable and robust dynamic walking for a biped motion is proposed. To success this objective, the following structures are processed. In this paper, the proposed control method is one that adjusts actual zero moment position to move to the closest possible point in the stable area instead of following desired zero moment position. This minimizes energy consumption with the smallest joint movements. The proposed control method makes mechanical energy that drives lower limb of the bipedal robot efficient. In this paper, walking experiment is carried out with the three control structures mentioned above. The trajectory generated by off-line is illustrated by performing to walking on flat ground. experiment with an obstacle whose height is lower than that of trajectory is executed to validate dynamic motion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.446-446
• /
• 2000

This paper presents the design of a passive biped walking robot based on limit cycle analysis. By using numerical analysis and experiment, we identify better design criterion for biped walking robot. In designing robot parameters we apply global search method to find limit cycles for given robot parameters and ground angle. Internal parameter variation changes limit cycle behavior, total energy, strides, etc and the characteristics of walking is analyzed by simulation and experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.75-82
• /
• 2006

In this paper, we propose an optimal trajectory for biped robots to move up-and-down stairs using a genetic algorithm and a computed-torque control for biped robots to be dynamically stable. First, a Real-Coded Genetic Algorithm (RCGA) which of operators are composed of reproduction, crossover and mutation is used to minimize the total energy. Constraints are divided into equalities and inequalities: Equality constraints consist of a position condition at the start and end of a step period and repeatability conditions related to each joint angle and angular velocity. Inequality constraints include collision avoidance conditions of a swing leg at the face and edge of a stair, knee joint conditions with respect to the avoidance of the kinematic singularity, and the zero moment point condition with respect to the stability into the going direction. In order to approximate a gait, each joint angle trajectory is defined as a 4-th order polynomial of which coefficients are chromosomes. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot that consists of seven links in the sagittal plane. The trajectory is more efficient than that generated by the modified GCIPM. And various trajectories generated by the proposed GA method are analyzed in a viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.601-607
• /
• 2006

This paper proposes a novel balance control scheme of a biped robot to predict the next position of ZMP using Kalman Filter. The mathematical model of the biped robot is generally approximated by 3D-LIPM(3D-Linear Inverted Pendulum Mode), but it cannot completely express the robot's dynamics. The stability of the biped robot depends on whether the ZMP(Zero Moment Point) position is in the stability region or out of. And the internal error between the robot mechanism and its model could affect the stability of a robot. Therefore, the proposed balance control not reduces the internal error, but also timely generates the proper control. The experiment of the proposed balance control is simulated on the virtual workspace where the biped robot may encounter with various difficulties.