• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권6호
• /
• pp.792-798
• /
• 2004

본 논문에서는 웨이퍼 영상에서 다이 위치를 인식하기 위한 새로운 코너점 검출 방법을 제안한다. 웨이퍼 다이 위치 인식은 WSCSP(Wafer Scale Chip Scale Packaging)기술에 필수적인 과정으로서 웨이퍼 윗면의 다이 패턴을 얼마나 정확히 인식하느냐에 따라서 후 공정의 정확도가 결정된다. 본 논문에서는 정확한 다이 위치를 인식하기 위하여 계층적 명암 영상 코너 검출 방법을 제안한다. 새로운 코너 검출자는 코너 영역을 마스크 크기에 따라서 동심원으로 나누어 각각의 동심원에서의 코너성과 방향성을 구하여 정확한 코너점을 검출하도록 하였다. 또한 계층적 구조를 가지고 처리하여 기존의 명암 영상코너 검출자 보다 더 빠른 처리 속도를 얻을 수 있도록 하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.450-456
• /
• 2000

In this paper, we proposed a novel control method which uses the internal impedance angles as a control parameter to drive traveling wave type ultrasonic motor. An impedance characteristic of the ultrasonic motor is obtained by analysis of the equivalent circuits including the external inductor used to generate the coupled resonance. The phase angle of internal impedance to achieve optimal control performance is derived. For the tracking of impedance angle, an information of phase difference is obtained from the applied voltage and current. The high speed phase difference detector is designed to monitor the phases of ultrasonic motor. The effectiveness of the proposed control scheme is clarified by experiments.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1524-1531
• /
• 2020

The aim of this work is to develop a Geiger-Muller (GM) detector system for robot to look for a radioactive source in case of a nuclear emergency or in a high radiation environment. In order to find a radiation source easily, a detector system, including 3 detectors, was designed to search γ-ray radiation sources autonomously. First, based on GEANT4 simulation, radiation dose rates in 3 Geiger-Muller (GM) counters were simulated at different source-detector distances, distances between detectors and angles. Various sensitivity analyses were performed experimentally to verify the simulated designed detector system. A mono-energetic ¹³⁷Cs γ-ray source with energy 662 keV and activity of 1.11 GBq was used for the observation. The simulated results were compared with the experimental dose rate values and good agreements were obtained for various cases. Only based on the dose rates in three detectors, the radiation source with a specific source activity and angle was localized in the different location. A method was adopted with the measured dose rates and differences of distances to find the actual location of the lost γ-ray source. The corresponding angles of deviation and detection limits were calculated to determine the sensitivity and abilities of our designed detector system. The proposed system can be used to locate radiation sources in low and high radiation environments.

• Nuclear Engineering and Technology
• /
• 제34권1호
• /
• pp.22-29
• /
• 2002

The angular correlation effect was investigated for Co-60 ${\gamma}$-ray spectroscopy by using HPGe detector and the effective angular correlation was theoretically calculated by considering the finite detector solid angle. For the calculation of effective angular correlation, the detection efficiency as a function of ${\gamma}$-ray incident direction was obtained by using Monte Carlo method and the first interaction model. The results and the methods used in the calculation are discussed.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권4호
• /
• pp.259-263
• /
• 2019

This study was purpose to compare image quality of Indirect digital radiography (IDR) system by using the International electro-technical commission standard(IEC 62220-1) which were applied to IEC in medical imaging. To evaluation the analysis of Modulation transfer function(MTF) measurements edge device each angle by using edge method. In this study, Aero (Konica, Japan) which is Indirect flat panel detector(FPD) was used, the size of image receptor matrix $1994{\times}2430$ which performed 12bit processing and pixel pitch is $175{\mu}m$. In IEC standard method were applied to each angle were compared. The results of shown as LSF at $2.0^{\circ}$ and $3.0^{\circ}$ angeles. Shape is constant and shows smooth shape. The amount of data seemed reasonable and 2.19 cycles/mm and 2.01 cycles/mm at a spatial frequency of $2.0^{\circ}$ and $3.0^{\circ}$ at an MTF value of 0.1. At an MTF value of 0.5, the spatial frequencies were $2.0^{\circ}$ and 1.11 cycles/mm and 0.93 cycles/mm at an angle of $3.0^{\circ}$. This study were to evaluate MTF by setting the each $2{\sim}3^{\circ}$ each angle and to suggest the quantitative methods of measuring by using IEC.

• 한국전자파학회논문지
• /
• 제14권5호
• /
• pp.466-471
• /
• 2003

본 논문에서는 포토다이오드의 방향이 항상 신호광의 입사방향과 일치하도록 수광각을 자동정렬하는 광검출기의 구조를 새로이 소개한다. 이 광검출기에서는 신호광을 수신하기 위한 포토다이오드 1개를 중심으로 $\Phi$-축상에 4개의 포토다이오드와 $\theta$-축상에 2개의 포토다이오드를 추가로 배열하여 각각 $\Phi$-축과 $\theta$-축에 해당하는 모터를 구동한다. 이 광검출기는 임의의 모든 방향으로부터 입사하는 신호광에 대하여 약 1초 이내에 수신방향을 신호광 쪽으로 일치시킨다.

• 한국방사선학회논문지
• /
• 제10권3호
• /
• pp.215-222
• /
• 2016

엑스선유방촬영술은 다양한 유방질환 중 석회화 병변을 진단하는데 가장 효과적인 방법이다. 환자의 의료피폭 저감과 진단에 필요한 최적의 영상을 얻기 위해서는 성능유지를 지속적으로 관리해야 한다. 엑스선유방촬영술에서 엑스선을 발생시키는 양극의 경사각도는 중심선을 기준으로 하기 때문에 조사야 내의 위치에 따라 엑스선관의 유효초점이 미세하게 달라질 수 있어 공간분해능의 차이가 발생할 수 있다. 본 연구에서는 디지털 엑스선유방촬영장치에서 검출기 위치에 따른 LSF를 측정하여 MTF를 계산함으로써 공간분해능 변화에 대해서 연구하였다. 와이어 직경에 대한 변화에서 $50{\mu}m$ 직경의 와이어의 경우 가장 높은 공간주파수 값을 나타냈으며 검출기의 픽셀보다 작은 직경을 갖는 와이어를 사용해야 검출기의 공간주파수에 따른 응답을 바르게 구할 수 있다는 것을 알 수 있었다. 조사야 내의 검출기의 위치에 따라서 공간주파수는 중심부분의 와이어가 나머지 와이어보다 우수한 MTF 특성을 보였으나, 그 차이는 미소하게 나타났다. 또한 중앙부분에서 반치폭 또는 유효초첨이 가장 작게 나타났으며 중앙에서 벗어날수록 반치폭이 증가하여 공간분해능이 낮아진 것으로 나타났다.

• Smart Structures and Systems
• /
• 제32권1호
• /
• pp.23-35
• /
• 2023

Steel bolted joint is an important part of steel structure, and its damage directly affects the bearing capacity and durability of steel structure. Currently, the existing research mainly focuses on the identification of corroded bolts and corroded bolts respectively, and there are few studies on multiple states. A detection framework of corroded and loosened bolts is proposed in this study, and the innovations can be summarized as follows: (i) Vision Transformer (ViT) is introduced to replace the third and fourth C3 module of you-only-look-once version 5s (YOLOv5s) algorithm, which increases the attention weights of feature channels and the feature extraction capability. (ii) Three states of the steel bolts are considered, including corroded bolt, bolt missing and clean bolt. (iii) Line segment detector (LSD) is introduced for bolt rotation angle calculation, which realizes bolt looseness detection. The improved YOLOv5s model was validated on the dataset, and the mean average precision (mAP) was increased from 0.902 to 0.952. In terms of a lab-scale joint, the performance of the LSD algorithm and the Hough transform was compared from different perspective angles. The error value of bolt loosening angle of the LSD algorithm is controlled within 1.09%, less than 8.91% of the Hough transform. Furthermore, the proposed framework was applied to fullscale joints of a steel bridge in China. Synthetic images of loosened bolts were successfully identified and the multiple states were well detected. Therefore, the proposed framework can be alternative of monitoring steel bolted joints for management department.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권1호
• /
• pp.15-21
• /
• 2020

This study was purpose to evaluation of Modulation Transfer Function in Measurements by using the International electrotechnical commission standard(IEC 62220-1) which were edge device each angle by using edge method. In this study was Aero(Konica, Japan) image receptor which is a indirect Flat panel detector(FPD) was used. The size of matrix 1994 × 2430 (14"× 17" inch) which performed 12 bit processing and pixel pitch is 175 ㎛. The results of shown as MTF measurements at IEC standard. The amount of data seemed reasonable and at an MTF value of 0.1 the spatial frequencies were 2.56 cycles/mm at an angle of 2.4°. MTF value of 0.5 the spatial frequencies were 1.32 cycles/mm at an angle of 2.4°. This study were to evaluate MTF by setting each angle 2.0°~2.8° degrees the most effective optimal edge angle and to suggest the quantitative methods of measuring by using IEC.

• 정보저장시스템학회논문집
• /
• 제7권1호
• /
• pp.19-24
• /
• 2011

Holographic Data Storage System, one of the next generation data storage devices, is a 2-dimensional page oriented memory system using volume holograms in writing and retrieving process. Recently photopolymer with disc type substrate was selected as a media for the Holographic Data Storage System. The disc tilt occurs when the media rotates and the external disturbance applies. The disc tilt causes the change of the angle between the reference beam and the media, the data cannot be retrieved with the right angle or other data page is retrieved. The tilt is generated in a 2-axis direction (tangential, radial). The tangential tilt direction is the same with the multiplexing plane, while the radial tilt direction is a perpendicular to the multiplexing plane. In this research we propose 2-axis tilt angle servo system. The tilt errors are measured by using external photo detector and the additional red laser. Then the tangential direction tilt is compensated by using the galvano mirror. Also the radial direction tilt is compensated by the rotating prism between the relay lens in the reference field. Finally we confirm the compensation results through the Signal to Noise Ratio(SNR) and Bit Error Rate(BER).