• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.20-26
• /
• 2014

This paper presents the procedures and the results of the pitch control force via flight test for a light airplane in order to make out the stability of the aircraft and the compliance with concerned regulation. The flight test procedures were determined in order to obtain the aircraft type certification. The instrumentation equipments including airspeed indicator, accelerometer, and pitch control force measurement tools are used to perform the flight test. For the flight test, the airspeed and the pitch control force with related normal acceleration are measured sustaining turn flight with bank angle derived from trim speed. The flight test results showed that the handling qualities of the airplane are complied with the KAS-23, the regulation of the Korean government for the light airplane type certification.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.680-683
• /
• 2011

This study deals with damage detection in beam structure by using modal strain energy-based technique with three different sensor types: accelerometer, lead zirconate titanate (PZT) piezoelectric sensor and electrical strain gage. First, the use of direct piezoelectric effect of PZT sensor for dynamic strain response are presented. Next, a modal strain energy-based damage detection method is outlined. For validation, forced vibration tests are carried out on lab-scale aluminum cantilever beam. The dynamic responses are measured for several damage scenarios. Based on damage localization results, the performance of three different sensor types is evaluated.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.99-102
• /
• 2010

스마트폰의 도입으로 인하여 증강현실이 널리 알려짐에 따라 대중들의 관심은 이에 집중되고 있으며 휴대성으로 인하여 모바일 기기에서의 증강현실 연구가 하나의 흐름으로 자리 잡고 있다. 기존의 증강 현실 관련 응용 기술들이 많이 연구되고 있지만 실제 게임에서 사용되고 있는 인공 지능과 결합된 연구는 이루어지고 있지 않다. 본 논문에서는 스마트 폰의 기능중 하나인 3축 가속도 센서를 이용하여 증강 현실 환경에서 3D 에이전트의 상태를 동적으로 변환하는 인공 지능 알고리즘을 제안한다. 인공지능이 적용된 에이전트의 상태를 제어하기 위한 전통적인 방식으로서 사용자가 직접 입력해 주거나 이를 인식하는데 마커를 사용하여 해결하였다. 본 논문에서는 증강 현실 구현을 위해 마커리스 추적 기술을 사용하였고 3축 가속도 센서를 이용하여 동적으로 에이전트의 상태를 변환하도록 하였다.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2182-2191
• /
• 2016

This study proposes a novel frame anti-vibration controller for position sensorless PMSM drive application. This controller is called specific component reduction controller (SCRC). SCRC can function without an accelerometer and can achieve speed variable control. This study mainly comprises the following phases. First, the position sensorless control method will be provided. Second, the frame vibration model and load torque ripple will be shown. Third, SCRC will be discussed and its stability will be analyzed. Finally, experimental results show that SCRC can achieve speed variable anti-vibration control and compensate target frequency torque ripple.

• Annual Conference of KIPS
• /
• 2017.11a
• /
• pp.1086-1087
• /
• 2017

타이젠은 오픈 소스 소프트웨어 플랫폼이다. 타이젠 SDK를 통해 개발자는 타이젠 프레임워크 상에서 동작하는 애플리케이션을 손쉽게 구현할 수 있다. 그러나 타이젠 SDK에서는 제스처를 인식하는 API를 제공하지 않는다. 따라서 제스처를 이용한 앱을 개발하기 위해서는 앱 개발자가 센서 값을 분석해 제스처를 인식하는 기능을 구현해야 한다. 여기서는 제스처를 인식하는 기능을 기존 플랫폼에 추가해 앱 개발 시간을 단축한 구현사례를 소개한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.888-892
• /
• 2003

This study was tested for the bending stress analysis of Experimental stress analysis on various ankle foot orthoses(AFOs) was fulfilled. Stress was measured by Strain gages which were attached on 8 region in AFOs Results revealed that the peak compressive/tensile stress in the orthoses occured in the lateral region of neck. The Stress Analysis system was made by the electronic oscilloscope, strain gage sensors, amplifier, A/D converter, PC with C program It will be able to using the important data in splint design. Selected AFOs were some different materials but all have same shape except one type(orthosis with joint). C program Is used for managing data. Thus lateral side of the neck region is failed easily.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.871-874
• /
• 2016

본 논문은 실내 환경에서 스마트 워치(smart watch)를 이용하여 사용자의 원시 데이터를 수집, 가공하고, 이를 통해 사용자의 다양한 복합 동작을 인식하는 방법을 제안한다. 사용자의 동작을 인식하는 방법들은 다양하다. 특히 최근 웨어러블 기기(wearable device)들이 각광받으면서 웨어러블 기기를 이용하여 인체 동작이나 활동 상태 등의 생체신호를 인식하려는 다양한 시도가 일어나고 있다. 하지만 동작이나 활동 상태에 관한 많은 연구들이 센서를 허리에 부착하는 등의 특정한 상황만을 상정하거나 위성항법장치(GPS, global positioning system)에 의존한 실외 환경에 국한되어 있는데, 이는 대부분의 시간을 가정과 직장, 이동 수단 등의 실내 환경에서 소비하는 현대인들의 시간 소비 패턴과는 거리가 있다. 본 연구에서는 스마트 워치의 가속도계(accelerometer), 각속도계(gyroscope), 심박계(heart bit), 압력계(barometer) 등 다양한 센서를 통해 원시데이터를 수집, 가공하여 사용자의 앉기, 서기, 오르막이나 내리막의 걷고 뛰기, 계단의 오르내리기 등 실내에서 일어날 수 있는 복합 동작을 인식하는 방법을 제안한다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.3
• /
• pp.138-141
• /
• 2006

Blood flow is one of vital signals related to human physiological information. Photoplethysmograph (PPG) has been used to measure indirectly heart rate, blood oxygen saturation ($SpO_2$), and so on. Because PPG signal is weak and sensitive to motion artifacts, it is very important to continuously obtain stable PPG signal during free movement. In this study, we applied the scaled Fourier linear combiner (SFLC) using both the adaptive filter and FLC to remove effectively the motion artifacts as well as background noise in the real time without additional signal correlated with motion from a accelerometer. The proposed method would be useful to reduce the movement and background noise which are not synchronized with heart rate.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.416-421
• /
• 2001

It was firstly issued that frequently broken of Encoder installed at travelling motor during RTGC operation. Estimated as broken due to excessive vibration of traveling and motor manufacturer claimed it as resonance of motor base. The principal vibration of Encoder was caused by the rotating vibration component of motor and by traveling wheel. The component transmitted from the wheel didn't have great vibration by the resonance with motor and other parts. Therefore, the plans was tried to add the support point to prevent the Encoder shaft vibrated greatly and inhibit the vibration. These showed good results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.545-550
• /
• 2009

Generally, the smoothing pre-filter of sensor's raw measurement(accelerometer and gyroscope) is used for INS's fast alignment. When the pre-filter is abruptly removed at Navigation-mode entry in vibration environment, INS's initial attitude error can be largely generated. So that we propose initial attitude error reducing methods(monotone increasing of cutoff-frequency, real-time attitude estimation), these are proved by simulation.