• 동력기계공학회지
• /
• 제5권2호
• /
• pp.36-42
• /
• 2001

This paper deals with finite element analyses of residual stresses causing popping up which are induced in micromachining processes of a microaccelerometer sensors. The paddle of the micro accelerometer sensor is designed symmetric with respect to the direction of the beam. After heating the tunnel gap up to 100 degree and get it through the cooling process and the additional beam up to 80 degree and get it through the cooling process. We learn the thermal internal stresses of each shape and compare the results with each other, after heating the tunnel gap up to 400 degree during the Pt deposition process. Finally we find the optimal shape which is able to minimize the internal stresses of microaccelerometer sensor. We want to seek after the real cause of this pop up phenomenon and diminish this by change manufacturing processes of microaccelerometer sensor by electrostatic force.

• Smart Structures and Systems
• /
• 제11권2호
• /
• pp.217-240
• /
• 2013

In this paper, practical methods to utilize PZT's dual piezoelectric effects (i.e., dynamic strain and electro-mechanical (E/M) impedance responses) for damage detection in beam-type structures are presented. In order to achieve the objective, the following approaches are implemented. Firstly, PZT material's dual piezoelectric characteristics on dynamic strain and E/M impedance are investigated. Secondly, global vibration-based and local impedance-based methods to detect the occurrence and the location of damage are presented. Finally, the vibration-based and impedance-based damage detection methods using the dual piezoelectric responses are evaluated from experiments on a lab-scaled beam for several damage scenarios. Damage detection results from using PZT sensor are compared with those obtained from using accelerometer and electric strain gauge.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.35-42
• /
• 2002

Frequency responses for most of the local seismic sensors in Korea have been roughly checked by mutual comparison of Fourier spectra of seismic records from accelerometer and seismometer, both of which are installed at the same location. Especially, because the frequency content of the seismic energy is usually above 1 Hz for local earthquakes, the reliability of low frequency response could have not been evaluated. Fortunately a recent large earthquake, Ms=7.2 on 02/06/29 containing dominant low frequency energy makes it possible to check the low frequency response of the seismic sensors, especially EpiSensor and JC-V100. Considering two types of sensor pairs, (STS-2 and EpiSensor, JC-V100 and EpiSensor), the low frequency response of EpiSensor is confirmed first by comparison with STS-2 which has proved low frequency response. Second, reliable low frequency limit of instrumentally corrected seismic data from JC-V100 data is estimated to be about 0.03 Hz by comparison with EpiSensor data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.206-211
• /
• 2004

Recently, the ride comfort problem becomes increasingly important because of today's needs for train speedup. The concept of ride comfort is equivocal. Generally, it is defined as the body vibration. The commercial high-speed train must be run the compound line in Korea which is composed of high-speed line and conventional line. In this paper, the ride comfort has been reviewed by the various experimental methods when the high-speed train is operated on both lines. The results show that the high-speed train has no problems from the viewpoint of the comfort ride during the operation on both lines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.578-579
• /
• 2010

최근 내연 기관에서 엔진상태 및 잠재적인 결함의 발견을 위해 연료분사, 실린더 내 연소과정, 실린더 내부와 피스톤 마모상태, 흡 배기 밸브 및 과급기 (turbocharger) 등의 상태 모니터링을 통해서 결함에 대한 진단 및 경향관리에 대한 연구들이 진행되고 있다. 본 연구에서는 기 개발된 선박용 대형디젤엔진에 대한 상시 모니터링 시스템을 이용하여 엔진상태 및 잠재적인 결함을 진단하고자 하였으며, 일차적으로 가속도 신호를 이용하여 실린더 내 연소과정에서 정상적인 상태와 착화실패에 따른 진동 양상을 비교 분석하였다. 신호 분석 기법으로 시간-주파수 분산 기법들은 충격파 신호인 엔진 폭발신호를 분석하는데 적합하였으며, 그 기법들 중 Short Time Fourier Transform 기법과 Wavelet Transform 기법을 이용하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.955-960
• /
• 2008

In this paper, an impulse of an industrial chop Saw is identified by experimental method and the impulse is reduced by structural modification. For the impulse identification, vibration signals are measured by an accelerometer when the chop saw is operating. From some experiments, it is found that the impulse occurs when there is slip between spindle and the wheelwasher and contact area is small between the wheelwasher and cutting discs. The design of the wheelwasher for optimization is performed by the FEM and experiments and the prototype is manufactured. It is verified that considerable amount of impulses are reduced by the structural modification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.303-304
• /
• 2006

In this work, we developed an equipment for automatic quality control of fuel pump motor using vibration analysis. The equipment automatically performs a series of tasks such as aligning and conveying the motor, attachment/detachment of an accelerometer, data acquisition, vibration analysis, and classification, etc. Compared to previous manual operations, the developed system is able to provide considerable savings in both time and cost.

• 화약ㆍ발파
• /
• 제32권1호
• /
• pp.18-22
• /
• 2014

코레일(한국철도공사)는 "지진가속도계측기 설치 및 운영기준"을 수립하여 고속철도에 적용하고 있으며, 고속철도 운전취급세칙을 개정하여 지진 발생시 철도의 안전운행을 위한 운전취급 요령에 따라 단계별 열차운행패턴을 구축하여 운영 중이다. 본 연구는 지진가속도계가 설치된 고속철도 인접구간에서 발파작업을 위한 노천 및 터널발파 설계 사례이다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.117-121
• /
• 2004

In this paper, the error compensation method of the low-cost IMU is proposed. In general, the position and attitude error calculated by accelerometers and gyros grows with time. Therefore the additional information is required to compensate the drift. The attitude angles can be bound accelerometer mixing algorithm and the heading angle can be aided by single antenna GPS velocity. The Kalman filter is used for error compensation. The result is verified by comparing with the attitude calculated and dynamics position determination by Attitude Heading Reference System with Micro Electro Mechanical System for a basis

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(D)
• /
• pp.50-51
• /
• 2011

스마트 휴대 단말기의 보급으로 인해 다양한 휴대 단말용 서비스가 보급되고 있다. 대부분의 서비스는 휴대 단말기의 가장 큰 특징인 이동성을 이용하여 위치 정보와 결합된 서비스이다. 따라서 정확도 높은 측위 기술은 휴대 단말용 서비스에 매우 중요하다. 현재 실외에서는 GPS를 이용해 고정밀의 측위가 가능하지만 실내에서의 측위에는 GPS를 사용할 수 없기 때문에 또 다른 고정밀 측위 시스템이 필요하다. 현재 주로 연구 개발되고 있는 실내 측위 기술은 주로 네트워크 기반의 측위 기술로써 설치 장소 및 인프라 구축 비용 등의 문제를 가지고 있으며 일부 지역에는 신호가 잡히지 않는 음영 지역 또한 존재하므로 정확한 실내 측위를 할 수 없다. 따라서 본 논문에서는 현재 휴대 단말에 기본적으로 탑재되어 있는 가속도 센서를 이용해 실내 측위를 하고 측위 오차를 QR코드를 이용해 보정하는 방안을 연구한다.