• 한국콘텐츠학회논문지
• /
• 제16권8호
• /
• pp.209-216
• /
• 2016

강력범죄사건에서 발견할 수 있는 증거물인 테이프는 접착면에 지문이 쉽게 유류될 수 있다. 청 테이프에 유류된 지문을 현출하고자 사삼산화철($Fe_3O_4$)기반의 Small Particle Reagents(SPR)를 사용하여 SPR의 제조비율 및 현출에 영향을 주는 요인에 대해 연구하였다. SPR이 지문현출에 영향을 주는 요인은 제조시 첨가되는 분말의 양, 계면활성제의 양, 계면활성제의 HLB(hydrophile-lipophile balance)에 의해 영향을 받는다. 증류수 100ml를 기준으로 분말의 양은 0.5g~1.0g일 때 융선에 적절한 양이 흡착되었으며 계면활성제의 양은 0.5ml이상이면 배경에 흡착된 분말들을 잘 씻어냈다. 또한 계면활성제의 HLB가 배경과 융선과의 대조비를 높이는 중요한 요인이었으며 유류된 지문의 지질 성분을 용해시키지 않는 11~18사이의 HLB가 뛰어난 현출력을 보였다.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.50-56
• /
• 2009

Surface plasmon resonance (SPR) biosensor has been used to detect many biochemical reactions, because this label-free sensor has high sensitivity and rapid response. The reactions are monitored by refractive index changes of the SPR biosensor. Iprovalicarb is protective, curative, and eradicative systemic fungicide introduced by Bayer AG in 1999. It has potential far control of downy mildew infesting onion, cucumber, grape and melon, late blight infesting tomato and potato, and anthracnose infesting watermelon and pepper. It is strictly limited to the maximum residue limit. In this study, the applicability of a portable SPR biosensor (Spreeta, Texas instrument, TX, USA) to detect the iprovalicarb residue was examined. The sensor chip was adopted to detect the reaction of iprovalicarb to immobilized iprovalicarb-antibody. The binding of the iprovalicarb onto the biosensor surface was measured by change of the refractive index (RI). Characteristics of the sensor chip including specificity, sensitivity, stability, and reusability were analyzed. In calibration test for seven levels of iprovalicarb concentration (0.32 to 5,000 mg/L) with three replications, a Sigmoidal model with Hill function was obtained between relative RI value and the iprovalicarb concentration with R-square of 0.998. It took 30 minutes to complete a set of detecting assay with the SPR biosensor.

• Journal of Microbiology
• /
• 제39권4호
• /
• pp.305-313
• /
• 2001

The spr D gene encoding Strptomyces griseus protease D(SGPD); a chymotrypsin-like proteae, was cloned from Strptomyces griseus IFO13350 and sequence. Most of the amino-acid sequence deduced from the nucleotide sequence is idential to that Strptomyces griseus IMRU3499 except that one amino acid has been deleted and Trp 369 has been substituted into Cys369 in the SGPD from S. griseus IFO13350 without affecting the protease activity. The spr D gene was overexpressed in Streptomyce liv-idans TK24 as a heterologous host. Various media with different compositions were also used to max-imize the productivity of SGPD inthe heterologous host. The SGPD productivity was best when the transformant S. lividans TK24 was cultivated in R2YE medium. The relative chymotrypsin activity of the culture broth measured with an artificial chromogenic substrate, N-scuccinyl-ala-ala-pro-phe-p-nitroanilide, was 16 units/ml. A high level of SGPD was also produced in YEME and SAAM medial but it was relatively lower that in R2YE medium and negligible amounts of SGPD were produced in GYE, GAE and Benedict media. The growth of S. lividans reacted the maximum level of cell mass at days 3 and 4 of the culture, but SGPD production started in the stationary phase of cell growth and kept increase in till the 10$^{th}$ day of culture in R2YE and YEME medium, but in GYE media the productivity reached maximum level at 8days of cultivation. The introduction of the spr D gene into S. lividans TK24 triggered biosyntheis of the pigmented antibiotic , actinorhodin, which implies some protease may paly a very improtant role in secondary-metabolite formation in sStreptomyces.

• 센서학회지
• /
• 제19권6호
• /
• pp.456-461
• /
• 2010

The detection of C-reactive protein(CRP) using self-assembled monolayer(SAM) was investigated by a portable surface plasmon resonance(SPR) sensor system. The CRP is a biomarker for the possible cardiovascular disease. The SAM was formed on gold(Au) surface to anchor the monoclonal antibody of CRP(anti-CRP) for detection of CRP. Sequence injection of the anti-CRP and bovine serum albumin(BSA) into the sensor system has been carried out immobilize the antibody and to prevent non-specific binding. The portable SPR system has two flow channels: one for the sample measurements and the other for the reference. The output SPR signal was increased with the injection of the anti-CRP, BSA and CRP due to binding of the proteins on the sensor chip. The valid output SPR signals was linearly related to the critical range of the CRP concentration. The experimental results showed the feasibility of the portable SPR system with newly developed SAM to diagnose a risk of the future cardiovascular events.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권9호
• /
• pp.520-525
• /
• 2003

A robust controller for large space structures(LSS) is studied from passivity point of view. While velocity sensors are commonly used for proportional-derivative (PD) control law to stabilize large space structures, if the structure can be controlled without velocity measurements, it is desirable against the failure of velocity sensors and for the cost reduction of the sensing system. In a recent result a dynamic output feedback control law has been provided using only displacement measurements. This paper presents a passivity-based controller design method and provides an alternative stability analysis tool for the previous displacement feedback robust control law. The closed-loop system can be viewed as a feedback interconnection of a passivated large space structure (LSS) and a strictly positive real (SPR) system.

• Journal of Microbiology and Biotechnology
• /
• 제18권10호
• /
• pp.1695-1700
• /
• 2008

An immunosensor based on surface plasmon resonance (SPR) with enhanced performance was developed through a mixed self-assembled monolayer. A mixture of 16-mercaptohexadecanic acid (16-MHA) and 1-undecanethiol with various molar ratios was self-assembled on gold (Au) surface and the carboxylic acid groups of 16-MHA were then coordinated to Zn ions by exposing the substrate to an ethanolic solution of $Zn(NO_3)_2\cdot 6H_2O$. The antibody was immobilized on the SPR surface by exposing the functionalized substrate to the desired solution of antibody in phosphate-buffered saline (PBS) molecules. The film formation in series was confirmed by SPR and atomic force microscopy (AFM). The functionalized surface was applied to develop an SPR immunosensor for detecting human serum albumin (HSA) and the estimated detection limit (DL) was 4.27 nM. The limit value concentration can be well measured between ill and healthy conditions.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.257-270
• /
• 2013

The use of lightweight materials has been steadily increasing in the automotive industry, and presents new challenges to material joining. Among many joining processes, self-piercing riveting (SPR) is particularly promising for joining lightweight materials (such as aluminum alloys) and dissimilar materials (such as steel to Al, and metal to polymer). However, to establish a process window for optimal joint performance, it often requires a long trial-and-error testing of the SPR process. This is because current state of the art in numerical analysis still cannot effectively resolve the problems of severe material distortion and separation in the SPR simulation. This paper presents a coupled meshfree/finite element with a moving boundary algorithm to overcome these numerical difficulties. The simulation results are compared with physical measurements to demonstrate the effectiveness of the present method.

• 분석과학
• /
• 제18권6호
• /
• pp.460-468
• /
• 2005

The biotin-avidin complex, as a model recognition system, has been constructed through N-hydroxysuccinimide(NHS) reaction on a variety of substrates such as a smooth Au film, electrochemically roughened Au electrode and chemically modified mica. Stepwise self-assembled monolayers (SAMs) of biotin-avidin system were characterized by surface-enhanced resonance Raman scattering (SERRS) spectroscopy, atomic force microscopy (AFM) and surface plasmon resonance (SPR). A strong SERRS signal of rhodamine tags labeled in avidin from the SAMs on a roughened gold electrode indicated the successful complex formation of stepwise biotin-avidin recognition system. AFM images showed the circular shaped avidin aggregates (hexamer) with ca. $60{\AA}$ thick on the substrate, corresponding to one layer of avidin. The surface coverage and concentration of avidin molecules were estimated to be 90% and $7.5{\times}10^{-12}mol/cm^2$, respectively. SPR technique allowed one to monitor the surface reaction of the specific recognition with high sensitivity and precision.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.116-123
• /
• 2004

The demand for the stable and comfortable cabin of a high speed passenger ship is increasing. The study on shipboard comfort has been mainly concentrated on the motion control of a whole hull body. In this study, however, a new control system operated by two parallel robots (3RPS, 3SPR) such as the active suspension system of motor vehicle is proposed. The goal of this control is keeping zero velocity of the upper robot (cabin) although the lower robot (ship) is moving by the waves. Jacobian matrix was used to design the controller, From the simulation results, the remarkable reduction of motion of the cabin (upper platform) was observed. The 3SPR parallel robot shows better performance compared to the 3RPS robot.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.167-172
• /
• 2021

he progressively improved sensing sensitivity (∆λ_SPR/∆n, nm/RIU) to detect the refractive index is observed on the SPR platform of an Au-covered epoxy gratings in an increase in potential cycling in a typical three-electrode cell. Here, a DVD-R optical disc was used as a structure template to prepare an Au-covered epoxy gratings, and the newly formed reverse track pitch structure on the epoxy substrate was used as a working electrode directly in aqueous sulfuric acid solution. It is expected that Au reconstruction by potential cycling in sulfuric acid electrolyte increases the packing density of Au atoms in the grain boundary and improves the propagation of electromagnetic waves.