• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.945-950
• /
• 2001

Floor impact noise has been evaluated by investigating the temporal and spectral characteristics of the noise. The noises generated by different impactors were analyzed to find out whether there is any correlation with the factors of ACF /IACF (Autocorrelation Function/Inter-aural Cross-correlation Function) [1] and Zwicker parameters [2]. Experiments were undertaken to compare the objective and subjective parameters of the floor impact noises generated by a bang/tapping machine, a rubber ball [3], and a walker. As a result, it was found that $\phi$ (0) and IACC extracted from ACF/IACF, and Loudness, Unbiased Annoyance from Zwicker parameters showed high correlation with subjective evaluations of loudness concerning floor impact noises. In addition, it was revealed that jumping is similar to the ball.

• 소음진동
• /
• 제11권3호
• /
• pp.443-448
• /
• 2001

The subjective unwantedness felt from the noise sources in living environment has been evaluated by investigating the limit of perceptual loudness of the noise. The noise limits were selected by the subjects. And the noises were analyzed to find out whether there is any correlation with Zwicker parameters and ACF/IACF factors. It seemed that the loudness of noise from vacuum cleaner does not affect its perceives noisiness. Traffic noise also seems to be less influential in annoyance rating. It was resealed that floor impact noise generated by bang machine is the most irritating noise that can be heard in residential buildings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.827-827
• /
• 2009

Complaints against high-speed train interior noise have been increasing as a number of high-speed train passenger grows bigger. It is very difficult to analyze characteristics of high-speed train interior noise using sound pressure level only. It is requested to consider how the public response change for each high-speed train interior noise. This study presents evaluation of the sound quality for interior noise of KTX-II using Zwicker parameters. Characteristic of loudness and sharpness is different between noise samples depending on operation condition. The noise sample that recorded when the high-speed train passed through tunnel section is more louder and sharper.

• 한국소음진동공학회논문집
• /
• 제12권6호
• /
• pp.437-444
• /
• 2002

This paper is to provide the basic way of a acoustical evaluation and efficient control noise by investigating the limits of perceptual loudness of living environment and by finding out any correlation between Physical characteristics of noise and psychoacoustic parameters. The limits of perceptual loudness were selected by the subjects in a chamber for residential and working environment. And the noise sources were analyzed to find out whether there is any correlation with Zwicker parameters and ACF factors. In this study especially, to set up the domestic evaluation grade about floor impact noise. we'd like to suggest the loudness Perception research result as fundamental resource for setting up the evaluation grade through the result that is based on annoyance. In the result of this research, upper limit of heavy-weight impact noise was L-60, and lower limit of it was L-50. On the other hand, upper limit of light-weight impact noise was L-70, and lower limit of it was L-55. It seemed that the loudness of noise from vacuum cleaner noise does not affect its perceived noisiness. Noises implicated In human such as floor walking noise and talking sound, are the most irritating noise in office environment.

• 감성과학
• /
• 제15권2호
• /
• pp.201-208
• /
• 2012

본 연구에서는 심한 소음으로 불쾌감을 주는 스포츠웨어용 PTFE 라미네이팅 투습발수 직물 8종을 대상으로 직물 마찰음의 심리음향학적 특성을 고찰하고, 심리음향학적 특성에 영향을 미치는 직물의 기본 특성과 역학적 특성 간의 관계를 파악함으로써, 직물의 심리음향학적 마찰음을 낮출 수 있는 변인을 찾아내고자 하였다. 직물 마찰음 시뮬레이터를 이용하여 녹음한 직물의 소리에서 Zwicker의 파라미터인 심리음향학적 크기(loudness(Z)), 날카로움(sharpness(Z)), 거칠기(roughness(Z)), 그리고 변동강도(fluctuation strength(Z))를 계산한 뒤, 소리특성에 대한 사후검정 결과에 따라 시료를 덜 시끄러운 PTFE 필름 그룹과 더 시끄러운 PTFE 필름 그룹으로 나누어 마찰음의 심리음향학적 특성과 직물의 역학적 특성, 기본특성간의 관계를 고찰하였다. 심리음향학적 특성 중 loudness(Z)만이 시료의 마찰음과 유의한 관계에 있는 것으로 나타났으며, 분석 결과 직물의 기본 특성에서는 layer가 얇고 필라멘트사를 사용한 직물의 마찰음이 덜 시끄럽게 인지되는 것으로 나타났으며, 직물 마찰음의 심리음향학적 크기에 영향을 미치는 주요변수로는 layer로 것으로 나타났다. 마찰음이 작은 PTFE 필름 그룹의 경우 전단 방향으로의 변형이 어려울수록 마찰음이 시끄나타났다. 시끄러운 마찰음을 갖는 PTFE 필름 그룹의 경우 심리음향학적 크기에 영향을 미치는 주요 변수로 전단이력이 설명 변인으로 포함되었다.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.486-491
• /
• 2012

This study examined the sound characteristics of Taekwondo uniform fabrics to investigate the relationship between the sound parameters and the mechanical properties of the fabric as well as to provide the conditions to maximize the frictional sound of the uniform. Frictional sounds of 6 fabrics for Taekwondo uniforms were generated by the Simulator for Frictional Sound of Fabrics. The frictional speeds were controlled at low(0.62 m/s), at mid(1.21 m/s) and at high(2.25 m/s) speed, respectively. The frictional sounds were recorded using a Data Recorder and Sound Quality System subsequently, the physical sound properties such as SPL(Sound Pressure Level) and Zwicker's psychoacoustic parameters were calculated. Mechanical properties of specimens were measured by KES-FB. The SPL, Loudness(Z) values increased while Sharpness(Z) value decreased. In the physical sound parameter, specimen E had the highest SPL value at low speed and specimen B at high speed. In case of Zwicker's psychoacoustic parameters, the commercially available Taekwondo uniform fabrics(E, F) showed higher values of Loudness(Z), Sharpness(Z), and Roughness(Z), that indicates they can produce louder, shaper and rougher sounds than other fabrics for Taekwondo uniforms. The decisive factors that affected frictional sounds for Taekwondo uniforms were W(weight) as well as EM(elongation at maximum load) at low speed and WC(compressional energy) at high speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1077-1082
• /
• 2001

기존의 타이어를 사용한 중량충격음에 대한 차음성능 평가방법의 타당성을 살펴보기 위하여 청감실험에 의한 감성적 반응결과와 L등급 및 Leq에 의한 평가 결과를 비교 분석하였다. 동일한 바닥충격원에 대한 분석결과 L등급평가 보다 Leq에 의한 평가가 청감실험의 반응에 잘 대응하는 것으로 나타났다. 또한, Zwicker parameters 중 Loudness와 Unbiased Annoyance는 청감실험과 가장 유사한 경향을 보였다.

• 한국음향학회지
• /
• 제36권1호
• /
• pp.78-87
• /
• 2017

본 논문에서는 심리음향학적 연구 방법론을 음악의 작품 분석에 적용하여 음악의 매개체인 소리에 내재된 주관성을 객관화하고자 한다. 먼저, 대표적인 표제음악인 베를리오즈의 '환상교향곡'에서 18개의 샘플음원을 추출한 다음 쯔비커의 음질 파라메터(Loudness, Sharpness, Roughness, Fluctuation Strength)를 이용해서 샘플음원의 객관적 음질을 평가하였다. 주관적 음질 평가를 위하여 환상교향곡의 표제성을 기초로 9개의 대표 음질형용사를 추출한 다음 수치등급평가법과 쌍대비교법을 사용하여 1차 청음평가를 수행하였다. 1차 청음평가결과의 요인분석법을 통하여 "밝은", "시끄러운", "현실적인"의 세 가지 음질을 추출하였다. 세 가지 음질 형용사를 사용하여 2차 청음평가를 수행하고 그 결과를 객관적 음질 파라메터와 상관분석을 수행하여 음질지표를 개발하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.447-452
• /
• 2012

Among the various elements affecting a customer's evaluation of automobile quality, buzz, squeak and rattle (BSR) are considered to be major factors. In most vehicle manufacturers, the BSR problems are solved by find-fix method with the vehicle road test, mainly due to various excitation sources, complex generation mechanism and subjective response. The aim of this paper is to develop the integrated experimental method to systematically tackle the BSR problems in early stage of the vehicle development cycle by resolving these difficulties. To achieve this aim, the developed experimental method ought to include the following requirements: to find and fix the BSR problem for modules instead of a full vehicle in order to tackle the problem in the early stage of the vehicle development cycle; to develop the exciter system including the zig and road-input-signal reproducing algorithm; to automatically localize the source region of BSR; to develop sound quality index that can be used to assess the subjective responses to BSR. Also, the BSR sound quality indexes based on the Zwicker's sound quality parameters using a multiple regression analysis. The four sound metrics from Zwicker's sound quality parameter are computed for the signals recorded for eight BSR noise source regions localized by using the acoustic-field visualized results. Then, the jury test of BSR noise are performed for participants. On a basis of the computed sound metrics and jury test result, sound quality index is developed to represent the harsh of BSR noise. It is expected that the developed BSR detection system and sound quality indexes can be used to reduce the automotive interior BSR noise in terms of subjective levels as well as objective levels.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.269-276
• /
• 2005

In this study, cross-cultural comparison of sound sensation for Korean traditional silk fabrics between Korea and America was performed and prediction models for sound sensation by objective measurements including sound parameters such as level pressure of total sound (LPT), Zwicker's psychoacoustic characteristics, and mechanical properties by Kawabata Evaluation System were established for each nation to explore the objective parameters explaining sound sensation of the Korean traditional silk. As results, Koreans felt the silk fabric sounds soft and smooth while Americans were revealed as perceiving them hard and rough. Both Koreans and Americans were pleasant with sounds of Gongdan and Newttong and especially Newttong was preferred more by Americans in terms of sound sensation. In prediction models, some of subjective sensation were found as being related mainly with mechanical properties of traditional silk fabrics such as surface and compressional characteristics.