• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.457-460
• /
• 2005

금속 알콕사이드의 가수분해법인 졸-겔 공정을 이용하여 일차로 $TiO_2$와 $ZrO_2$ 나노 입자를 합성하고 난 후 $TiO_2$ 나노입자와 PbO를 혼합하여 $PbTiO_3$의 나노 입자를 얻었다. 2차 공정으로 나노입자 크기의 $ZrO_2$와 혼합하여 최종적으로 $PbZrTiO_3(PZT)$ 분말을 합성하였다. 소결된 압전체의 결정상을 분석하기 위하여 X-선 회절분석을 시행하였으며, 소결전 합성분말의 모양과 크기를 투과전자현미경을 이용하여 관찰하였으며 $900^{\circ}C$의 저온에서 소결한 $PbZrTiO_3$시편의 미세조직을 관찰하기 위하여 주사전자현미경을 이용하였다. 합성된 입자들의 크기는 각각 $TiO_2$는 약 20 ${\~}$ 30nm, $ZrO_2$는 15${\~}$30nm이였으며, $900^{\circ}C$ 저온에서 소결한 PZT 시편의 SEM 관찰결과 평균 입경은 $2{\~}4{\mu}m$의 페로 브스카이트 결정으로 치밀한 조직을 나타내었으며, 우수한 압전 특성도 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.365-366
• /
• 2005

PZT films are the most intensively investigated because PZT has advantages such as low processing temperature and large remnant values. In this paper, the microstructure and electric properties of $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ heterolayered thick films with Zr mole ranging from 30 to 70 % screen printed onto a alumina substrate were studied. $Pb(Zr_x,Ti_{(1-x)})O_3$ and $BaTiO_3$ powders were prepared by the sol-gel method. The $BaTiO_3$ powders were calcined at $700^{\circ}C$ for 2 hours. Structural properties of $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ multilayered thick films were investigated. As a result of the X-ray diffraction (XRD) analysis, $Pb(Zr_x,Ti_{(1-x)})O_3/BaTiO_3$ exhibited a perovskite polycrystalline phase without pyrochlore phase or any preferred orientation.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.839-846
• /
• 1996

Epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$by pulsed laser deposition for ferroelectric field effect transistor. Epitaxial $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures exhibited 70$\mu C/cm^2$ and 17 $\mu C/cm^2$at a positively and negatively poled states, respectively. On the other hand, epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/LaCoO_3$heterostructures show the remnant polarization states opposite to the $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures. This indicates that the interface between (La, Sr)$CoO_3$ (LSCO) and $Pb(Zr, Ti)O_3(PZT)$ layers affects the asymmetric polarization remanence through electrochemical nature. The resistivity of $LaCoO_3$ (LCO) layer was found to be dependent on an ambient oxygen, primarily the ambient oxygen pressure during deposition. The resistivity of the LCO layer varied in the range of 0.1-100 $\Omega$cm. It is suggested that, with an appropriate resistivity of the LCO layer, the LCO/PZT/LSCO heterostructure can be used as the ferroelectric field effect transistor.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.935-941
• /
• 1991

Effects of calcination process and ZrO2 addition on the electrical properties of [(Ba0.82Sr0.08Ca0.1)O]m(Ti1-$\chi$Zr$\chi$)O2 ceramics have been investigated. With the variation of A/B-site ratio m of the dielectric formulations, sintering behavior and the resistivity after sintering in a reducing atmosphere have been affected by the calcination process. When the dielectric formulations of m=1.01 were sintered in a reducing atmosphere, the room-temperature resitivity of 109 {{{{ OMEGA }}.cm was obtained for samples processed with two-step calcination, which was much lower than 1012 {{{{ OMEGA }}.cm of samples calcined once. It was confirmed that high resistivity of Ca-doped BaTiO3 ceramics, after sintering in a reducing atmosphere, is maintained by acceptor-like behavior of CaTi" which is formed by Ca substitution to Ti-site. It was also found out that the critical amount of B-site Ca substitution for reduction inhibition of BaTiO3 is around 0.005 mol. With the increasing amount of ZrO2 addition to dielectric formulations, Curie peak was depressed and Curie temperature was lowered due to the enhanced diffuse phase transition.tion.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.297-304
• /
• 1991

Dielectric hysteresis characteristics of Pb(Zr0.52Ti0.48)O3 ceramics have been investigated as a function of the amount of MnO2 addition ranged from 0.0 wt% in Pb(Zr0.52Ti0.48)O3 ceramics enhanced the dielectric strength, aging effect and remanent polarization, while reduced the coercive field. These results could be explained by the effect of Mn-Vo association due to the substitution of Mn for the (Zr, Ti) site in PZT.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.477-483
• /
• 1987

Cr2O3 doped Pb(Zr0.525 Ti0.475)O3 piezoelectric ceramics were prepared from reagent grade oxide mixture, PbO, ZrO2, TiO2 and Cr2O3. Piezoelectric and aging properties of specimens were measured for various additions of Cr2O3. Generally, it has been known that aging rate decreased with Cr2O3 addition by stabilizing the domain wall. But hysteresis loops showed that the domain destabilization was occurred at high electric field (larger than 10KV/cm). In smaller additions of Cr2O3 (0-0.2mol%), aging rate increased and microcracks were created with increasing poling filed due to increasing internal stress. In larger additions of Cr2O3(0.4∼0.6mol%), aging rate decreased with increasing poling field.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.65-73
• /
• 1996

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.173-173
• /
• 2009

무독성 원소를 포함하는 Ti-35Nb-x(3, 5, 7, 10, 15)Zr 합금을 제조하여 양극산화 방법을 통해 표면에 nanotube를 형성한 후 0.9% NaCl 용액에서 부식특성을 관찰하였다. 합금 표면에 형성된 안정된 nanotube 형태의 $TiO_2$, $Nb_2O_5$ 및 $ZrO_2$가 내식성 향상에 영향을 주었음을 알 수 있었다.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.684-690
• /
• 2000

Metal-Ferroelectric-Metal(MFM) 구조의 개퍼시터에서 $Pb(Zr,Ti)O_3(PZT)$-전극 계면층이 PZT 박막 특성에 기여하는 영향을 알아보기 위하여 Pt/PZT/계면층/Pt/$TiO_2/SiO_2$/Si 구조의 캐퍼시터를 제작하였다. 계면층으로 사용될 물질들 중에서 $PbTiO_3(PT)$ 층을 sol-gel 방법으로 형성하였으며, PbO, $ZrO_2,\;TiO_2$ 층들을 reactive sputtering 방법으로 형성하였다. PZT박막을 구성하는 원소들로 이루어진 단순 산화물들의 특성을 평가하기 위하여 PbO, $ZrO_2,\;TiO_2$를 계면층으로 사용하여 $600^{\circ}C$에서 열처리를 실시하였고, 이 경우에는 $TiO_2$가 가장 우수하게 PZT의 결정립 크기를 미세하게 하는 효과를 보였으나, 두께가 증가함에 따라 표면 거칠기가 증가하고 anatase 상으로 남기 때문에 강유전특성이 열화되었다. 반면에 PT 박막을 계면층으로 사용한 경우에는 결정립 크기의 감소와 더불어 전기적인 특성도 향상되었다. 또한 PZT의 핵생성 위치를 판단하기 위하여 PT 삽입층의 위치를 변화하며, 실험한 결과, 하부전극과 PZT 박막의 계면에 PT 삽입층을 형성하였을 경우에 가장 효과적인 seed로서의 역할을 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.53-58
• /
• 2007

In the dehydrogenation of ethylbenzene to styrene, CO2 could play a role as an oxidant to increase conversion of ethylbenzene and stability as well over TiO2-ZrO2 mixed oxide catalysts. TiO2-ZrO2 catalysts were prepared by co-precipitation method and were characterized by BET surface area, bulk density, X-ray diffraction, temperature programmed desorption of NH3 and CO2. These catalysts were found to be X-ray amorphous with enhanced surface areas and acid-base properties both in number and strength when compared to the respective oxides (TiO2 and CO2). These catalysts were found to be highly active (> 50% conversion), selective (> 98%) and catalytically stable (10 h of time-on-stream) at 600 oC for the dehydrogenation of ethylbenzene to styrene. However, in the nitrogen stream, both activity and stability were rather lower than those in the stream with CO2. The TiO2-ZrO2 catalysts were catalytically superior to the simple oxide catalysts such as TiO2 and ZrO2. The synergistic effect of CO2 has clearly been observed in directing the product selectivity and prolonging catalytic activity.