• 열처리공학회지
• /
• 제11권2호
• /
• pp.99-110
• /
• 1998

The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.

• 열처리공학회지
• /
• 제24권2호
• /
• pp.77-81
• /
• 2011

Aluminum nitride (AlN) thin films were prepared by using nitrogen ion beam assisted reactive radio frequency (RF) magnetron sputtering on the glass substrates without intentional substrate heating. After deposition, the effect of nitrogen ion beam energy on the structural and optical properties of AlN films were investigated by x-ray diffraction (XRD), atomic force microscope (AFM) and UV-Vis. spectrophotometer, respectively. AlN films deposited with $N^+$ ion irradiation at 100 eV show the higher (002) peak intensity in XRD pattern than other films. It means that $N^+$ ion energy of 100 eV is the favorable condition for low temperature crystallization. AFM images also show that surface average roughness is increased from 1.5 to 9.6 nm with $N^+$ ion energy in this study. In an optical observation, AlN films which deposited by $N^+$ ion beam energy of 100 eV show the higher transmittance than that of the films prepared with the other $N^+$ ion beam conditions.

• 열처리공학회지
• /
• 제24권2호
• /
• pp.87-91
• /
• 2011

Single layer Sn doped $In_2O_3$ (ITO) films and ITO 50 nm / Au 10 nm / ITO 40 nm (IAI) multilayer films were prepared with electron beam assisted magnetron sputtering on glass substrates. The effects of the Au interlayer, post-deposition atmosphere annealing and intense electron irradiation on the methanol gas sensitivity were investigated at room temperature. As deposited ITO films did not show any diffraction peaks in the XRD pattern, while the IAI films showed the diffraction peak for $In_2O_3$ (400). In this study, the gas sensitivity of ITO and IAI films increased proportionally with the methanol vapor concentration and an intense electron beam irradiated IAI film shows the higher sensitivity than the others film. From the XRD pattern, it is supposed that increased crystallization promotes the gas sensitivity. This approach is promising in gaining improvement in the performance of IAI gas sensors used for the detection of methanol vapor at room temperature.

• KIEAE Journal
• /
• 제12권5호
• /
• pp.71-76
• /
• 2012

As reviewed of developments of Korean earth architecture, earth-made buildings have been dwindled gradually since "the new community movement" and earth have been recognized as materials which are not so good to human health and in result, earth-related techniques have been also forgotten. However, recently the earth architecture has been more attracting back many attentions thanks to the people who are interested in health and wellbeing and the earth related techniques or skills got keenly required. The present study has investigated and reproduced earth finishing materials which are based on natural materials as basic stuffs to use them as the finishing materials of the modern earth architecture. For the test, the finishing materials have been divided roughly into sorts of pastes and oils. In case of applying finishing materials onto earth surfaces, the moisture permeability test was conducted to measure a water-absorbing speed, and at the case of using finishing materials for interior works moisture adsorption/desorption test was performed to verify the indoor humidity regulation ability, and further a test to check whether to be stained when contacted with the finishing materials, was conducted. If there is not any stain it might be recognized to be high quality of moisture adsorption/desorption and so seaweed pastes or starches might be used for paste finishing materials and for natural oils, beans are desirable in practical ways. As low-quantity of moisture adsorption materials, linseed oil is most desirable and also beaned water over75% are thought to be useful.

• 디지털융복합연구
• /
• 제15권11호
• /
• pp.463-470
• /
• 2017

VR 영상을 활용한 가상현실 콘텐츠는 제작의 용이성과 사용자 편의성으로 인해 주목받고 있으나 상호작용이 결여된 상태이기 때문에 응용 분야와 활용성에 있어서 한계가 있다. 본 연구에서는 이러한 문제점을 극복하고자 360도 파노라마 영상과 게임엔진을 활용하여 상호작용이 가능한 고해상도 VR 서비스를 구축하는 방안을 제시한다. 특히 복잡한 연산이 소요되는 배경 영상은 파노라마 영상으로 미리 렌더링하여 생성한 것이므로 낮은 사양의 단말기에서도 높은 프레임 수를 유지하면서 서비스를 제공할 수 있는 특징이 있으며, 사용자의 시점과 움직임에 반응하여 고해상도의 배경영상을 발췌하여 보여주기 때문에 상당한 몰입감을 구현할 수 있다. 본 제안 방법의 효과성을 보이기 위해 가상 동물원 환경을 VR로 구성하여 보았으며 사용자의 상호작용과 몰입감을 증대시킬 수 있음을 보이기 위해 상호작용 게임을 사례로 보인다.

• 한국식품조리과학회지
• /
• 제32권5호
• /
• pp.619-626
• /
• 2016

Purpose: This study aims to provide important methods to increase egg usage eggs in communal food services, based on the knowledge and awareness of the dietician. Methods: A survey on 200 dieticians in various aspects, such as egg purchase, utility, importance of egg dishes and allergy awareness was conducted. Result: Dieticians' highest consideration in purchasing eggs were cost (41.5%) and food safety certification (41.0%); the 88.6% of purchases were general egg. The most inconvenient issues in the purchase were inability to confirm freshness (42.0%), frequent breakage (23.5%) and inconvenience in shell disposal (18.5%). During the process of cooking, cracking egg shells (49.5%) and disposal of shells (14.0%) were marked as the major inconveniences. When questioned on intention to purchase liquid and powder eggs to overcome the shell disposal inconvenience, 64% answered no, with distrust in food safety (44.5%) being the major concern. The frequency of using eggs as the main ingredient was 1~2 times per week, with 49.0%. Food service customers favored rolled omelet (36.7%) and steamed egg (20.6%), and the most used utensil was the frying pan (56.5%). When important factors in egg dishes, namely diverse menu, taste, nutrition, consumer satisfaction and allergic reaction were surveyed, most answered that all 5 factors were important. Conclusion: For increasing egg dish inclusions in communal food service, the safety assurance, increase in liquid and processed egg use, and supply of cooking utilities are necessary.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.71-77
• /
• 2016

The dielectric barrier discharge (DBD) has low efficiency due to about 70% input power is consumed as thermal energy in the discharge space. However, because of the usage of DBD ozone generator is easier than other methods. The DBD ozone generator has been widely applied for high concentration ozone generation in the industrial application. But, the low-capacity compact DBD ozone generator is not applied so far. Therefore, the DBD ozone generator is necessary to improve ozone production efficiency and reduce the capacity. In this paper, the stainless steel pipe inner electrode was designed with hall type and screw type to improve the ozone production yield. The manufactured two inner electrodes were experimented with normal type for comparison of the discharge characteristics and the ozone generating characteristics. As the experimental results, the discharge current effective value of designed inner electrodes with hall type and screw type are higher than the normal type, due to unequal electric field is formed at the boundary. However, the difference of designed and original electrodes is less than 0.1mA that has no effect on the discharge characteristic. On the other hand, the screw type inner electrode increased higher than original model about 7 times when the flow rate of the oxygen source gas was increased from $0.6{\ell}/min$ to $1.0{\ell}/min$ The reason was assumed by the flow rate of the raw gas through the inner electrode was became fast that has a cooling effect. The designed hall type and screw type inner electrodes have shown good performances in ozone generation and ozone production that better than normal type in the same electrode surface area.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.64-69
• /
• 2015

This study investigates the Horizontal surface discharge characteristics of solid insulators by varying their materials, and the dew-point of dry-air. The methodology of this study is that a quasi-uniform field is first applied to a test chamber. Then, the chamber is filled with dry-air as an insulation gas which pressure is varied from 1 to 6atm while applying an AC voltage to the chamber. The used solid insulators are teflon, polyethlene and polyurethane. As the dew-point is lower and the pressure of dry-air is higher, the flashover voltage of all solid insulators increases more. When each characteristic of the solid insulators is compared under the same gas pressure, the flashover voltage of teflon is the highest. Then, the flashover voltage of polyethlene is higher than that of polyurethane. Moreover, it is observed that the flashover voltage increases as the horizontal distance between the electrodes of each solid insulator become larger, respectively. However, as the pressure is increased, flashover voltage of the solid insulators is saturated. Therefore, selection of cost-effective insulation is needed in order to appropriate pressure.

• 한국수산과학회지
• /
• 제42권1호
• /
• pp.56-62
• /
• 2009

Feeding regimens was investigated for the growth and survival rate of juvenile Maroon clownfish (Premnas biaculeatus) in order to establish a seed production technique for this fish. Three types of feeding regimens were used, and growth and survival were highest under the following regimen: rotifer from day 0, Artemia from day 4, copepod from day 9 and artificial food from day 15, respectively (P<0.05). The average body lengths of the larvae were $6.76{\pm}0.55\;mm$, $7.63{\pm}0.50\;mm$ and $7.33{\pm}0.43\;mm$ in the Nannochloropsis oculata, Isochrysis galbana and control treatments conducted with 3 larvae/L, respectively (P<0.05). There were significant differences in larval growth between the treatments and controls conducted with 6 larvae/L and 9 larvae/L, respectively (P<0.05) but there was no significant difference between the N. oculata and I. galbana treatments (P>0.05). There were no significant differences in larval growth between the treatments at densities of 3-9 larvae/L (P>0.05). At highest density level, the larvae reared in I. galbana had the highest survival rate whereas survival was lowest in the control.

• 조명전기설비학회논문지
• /
• 제13권2호
• /
• pp.71-79
• /
• 1999

본 노문에서는 무성방전의 중첩을 이용한 새로운 방전형식의 고농도.소수율 다중방전형 오존발생기를 설계.제작하였다. 다중반전형 오존발생기(MDO)는 설치된 3개의 전극과 길이가 다른 2개의 방전간극에 $180[^{\circ}]$의 위상차를 가진 2개의 고류고전압 전원의 인가에 따라서 무성방전의 중첩에 의하여 오존생성특성이 각기 다른 3가지 형태의 중첩방전형 오존발생기(SDO)의 형태변화에 따른 방전특성과 오존생성특성을 연구한 결과, 최대 17185[ppm] 및 783[g/kwh]의 오존생성특성을 얻을 수 있었으며, 17185[ppm] 의 오존을 염색폐수에 접촉시켰을 때, 탈색특성이 우수하여 다중방전형 오존발생기가 수질환경개선 설비로 적용가능함을 확인하였다.