• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.3
• /
• pp.224-235
• /
• 2014

Changes in the interactions among incident ocean water waves, coastal debris (marine debris), and the back vegetation zone line on a natural sandy beach on the island of Jinu-do in the Nakdong river estuary were investigated. The study involved a cross-sectional field survey of the beach, numerical modeling of incident ocean water waves, field observations of the distribution of coastal debris, and vegetation zone line tracking using GPS. The conclusions of this study can be summarized as follows: (1) The ground level of the swash zone (sandy beach) on Jinu-do is rising, and the vegetation zone line, which is the boundary of the coastal sand dunes, shows a tendency to move forward toward the open sea. The vegetation zone line is developing particularly strongly in the offshore direction in areas where the ground level is elevated by more than 1.5 m. (2) The spatial distributions of incident waves differed due to variations in the water depth at the front of the beach, and the wave run-up in the swash zone also displayed complex spatial variations. With a large wave run-up, coastal debris may reach the vegetation zone line, but if the run-up is smaller, coastal debris is more likely to deposit in the form of an independent island on the beach. The deposited coastal debris can then become a factor determining which vegetation zone line advances or retreats. Finally, based on the results of this investigation, a schematic concept of the mechanisms of interaction between the coastal debris and the coastal vegetation zone line due to wave action was derived.

• ETRI Journal
• /
• v.40 no.6
• /
• pp.736-744
• /
• 2018

This study considers zone-based registration (ZBR), which is adopted by most mobile cellular networks. In ZBR, a user equipment (UE) registers its location area (or zone) in a network database (DB) whenever it enters a new zone. Even though ZBR is implemented in most networks for a UE to keep only one zone (1ZR), it is also possible for a UE to keep multiple zones. Therefore, a ZBR with two zones (2ZR) is investigated, and some mathematical models for 2ZR are presented. With respect to ZBR with three zones (3ZR), several studies have been reported, but these employed computer simulations owing to the complexity of the cases, and there have been no reports on a mathematical 3ZR model to analyze its performance. In this study, we propose a new mathematical model for 3ZR for the first time, and analyze the performance of 3ZR using this model. The numerical results for various scenarios show that, as the UE frequently enters zones, the proposed 3ZR model outperforms 1ZR and 2ZR. Our results help determine the optimal number of zones that a UE keeps, and minimize the signaling cost for radio channels in mobile cellular networks.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.3
• /
• pp.153-162
• /
• 2015

Land information is important for the international agricultural companies. This study investigated the agriculture and soil information in Sri Lanka. This study is the results from investigation of soil properties and agricultural properties determined by the Soil Taxonomy classification system for the soils in Sri Lanka. The order of the main agricultural imports in Sri Lanka was wheat > refined Sugar > dry Onion > Rice > Lentils. The climate of Sri Lanka is divided into three climatic zones. There are a wet zone, an intermediate zone, and a dry zone. Rainfall of the wet zone was $3,000-5,000mm\;year^{-1}$. The rainfall of the dry zone was less than $1,000m^{-1}$. The intermediate zone was in the middle area. Soil series of Sri Lanka were 109 in total. Detailed information of soil series was: 6 of soil Orders, 15 of Suborders, 39 of Great groups, and 56 of Subgroups. Soil texture of topsoil was much more coarse, but subsoil was gravelly coarse soil. Soil of Sri Lanka was classified as a Soil Order. The orders were Entisols > Alfisols > Ultisols > Inceptisols > Histosols > Vertisols.

• Korean Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.48-57
• /
• 2009

Primary production of epiphytic and planktonic algae in a shallow reed zone of a lagoon Nishinoko was investigated. Concentrations of nutrients varied widely horizontally and locally in the lagoon. It seems that the reed zone has a heterogeneous environment. The photosynthetic rates of epiphytic and planktonic algae were 7 to 14 mg C surface stem $m^{-2}hr^{-1}$ and 12 to $46mg\;Cm^{-3}hr^{-1}$, respectively. The areal primary production of epiphytic algae was estimated as 4 to $13mg\;Cm^{-2}hr^{-1}$ from the stem density of Phragmites and the water depth at each station. The production of phytoplankton, on the other hand, was 5 to $56mg\;Cm^{-2}hr^{-1}$. The contribution of epiphytic algae to total primary production averaged 53%, although the assimilation number was much lower than that of phytoplankton. The present results indicate that the epiphytic algae are one of the significant primary producers in the reed zone.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.44-50
• /
• 2022

An off-axis zone plate is able to focus on a single order while neglecting the zeroth order in a visible imaging system. This allows one to enhance the contrast quality in diffractive images, which is the major advantage of this type of zone plate. However, most previous reflection zone plates are used in focusing X-rays with a small grazing incident angle and are intricately designed with the use of a local grating period. In this study, we suggest the design of an off-axis elliptical zone plate (EZP) that is used to focus a monochromatic light beam with separation between the first and unfocused orders under a large grazing incident angle of 45°. An assumption using the total grating period, which depends on the average and constant grating period, is proposed to calculate the desired distance between the first and zeroth order and to simplify the construction of a novel model off-center EZP. Four diffractive optical elements (DOEs) with different parameters were subsequently fabricated by direct laser lithography and then verified using a performance evaluation system to compare the results from the assumption with the experimental results.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.213-217
• /
• 2004

Laboratory scale study for an area of influence and flowing aspect of groundwater saturated zone was conducted for three sediment grains. On the AMG(Average Modal diameter Grains) 0.34, 1.38, 3.89mm diameter samples, the affected area of the aquifer were 15.2, 37.0, 30.0%/m2 each. Air flow for AMG 0.34mm diameter grain size provides indication of pattern of channelized air flow in saturated zone and expansion state in above saturated zone. For AMG of 1.38, 3.89mm diameter grains, air flow are pervasive air flow, forming a symmetrical cone of influence around the injection point. And also AMG 1.38, 3.89mm diameter samples show onset of collapse and approach to steady state in above saturated zone, respectively. In this study, optimal sites for in situ air sparging, may be grain diameters between about AMC 1.5～2.5mm diameter.

• Journal of Korea Foundry Society
• /
• v.15 no.3
• /
• pp.252-261
• /
• 1995

The purposes of this study were to investigate the microstructural changes in alloy ribbons of Al-Fe-Mo-Si quarternary system at $450{\sim}500^{\circ}C$, and to study the coarsening mechanism of fine precipitates. Using the hot stage in TEM, in situ microstructural changes in Al-4Fe-0.5Mo-1.5Si alloy ribbon and Al-8Fe-2Mo-1.5Si alloy ribbon have been examined successively up to 60 hours at $450^{\circ}C$ and $500^{\circ}C$. Cell structure in zone B of Al-4Fe-0.5Mo-1.5Si alloy ribbon was observed to collapse even in 10 minutes by in-situ heating at $450^{\circ}C$ and the size of precipitates in zone B increased twice in 60 hours. The precipitates in zone A of Al-4Fe-0.5Mo-1.5Si alloy ribbon showed slower coarsening rate than those in zone B by in-situ heating at $450^{\circ}C$. The precipitates in zone A of Al-8Fe-2Mo-1.5Si alloy ribbon increased 50% by in-situ heating at $500^{\circ}C$ in 50 hours compared to the initial precipitates while any microstructual change in zone B was not observed by in-situ heating at $500^{\circ}C$ up to 50 hours. Only the precipitates in zone A of Al-4Fe-0.5Mo-1.5Si alloy ribbon satisfied $r^3{\propto}t$ relationship of coarsening mechanism.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.111-121
• /
• 2011

This paper discusses a method for optimizing the semi-actuated traffic signal control system by adjusting the initial interval according to the number of vehicles waiting for the green light in the actuated phase. We also present a Left-Turn actuated traffic signal control strategy that examines the vehicular noise in the detection area and determines the phase extension and the gap-out. In order to detect the vehicles in real-time, an image detector's Video Image Tracking technology was adopted. A 'Zone in Zone'method was implemented, and the image detection area is segmented into three zones: 1) Zone1 for verifying a vehicles obligatory presence, 2) Zone2 for counting the standby vehicles, and 3) Zone3 for examining the number of vehicles that have passed. The on-site assessment of the Left Turn Actuated Control is carried out using CORSIM, and the results show that the Control Delay decreased by 23.10%, 15.06%, and 4.34% compared to the delays resulted from pre-timed control, semi-actuated control-1 and semi-actuated control-2 traffic signal control systems respectively. The Queue Time also decreased by 36.24%, 20.10% and the Total Time by 14.36%, 7.02% for the same scenario. Which clearly demonstrates the operational efficiency. A sensitivity analysis reveals that the improvement from the propose traffic control strategy tends to increase as the through traffic volume reaches a saturated condition and the left-turn traffic volume decreases.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.1 s.2
• /
• pp.56-63
• /
• 1999

In this study, the performance prediction programs for centrifugal pumps are developed. To estimate the losses in the centrifugal pump impellers, a two-zone model and TEIS(two elements in series) model are applied to the program. The basic concept of a two zone model considers the primary zone that is an isentropic core flow and the secondary zone that has a non-isentropic region at the impeller exit. The flow goes through two different zones and is mixed out at the impeller exit and the mixing process occurs with an increase in entropy, a decrease in total pressure. The level of the core flow diffusion in an impeller was calculated using TEIS(two elements in series) model. The effects of various parameters which are used in this program on the prediction of head and efficiency are discussed. The correlation curves used to select the effectiveness of the primitive TEIS model were suggested according to the specific speed of the centrifugal pumps.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.26-29
• /
• 2003

This study determined that the four corrosive characters of carbon steel in the marine splash zone (MSZ) in China's four sea areas. It has a range and a corrosion peak value. The rust in the MSZ plays the role of "depolarizer" in the cathodic process of corrosion. The growth law of the rust layer in MSZ has a character of "annual ring". In addition the reasons causing serious corrosion of carbon steel in the marine splash zone has been discussed in this paper.