• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.54-70
• /
• 2023

Surveys and studies on cultural assets using LiDAR measurement are already active overseas. Recently, awareness of the advantages and availability of LiDAR measurement has increased in Korea, and cases of using it for surveys of cultural assets are gradually increasing. However, it is usually restricted to surveys of mountain fortresses and is not actively used for surveys of ancient tombs yet. Therefore, this study intends to emphasize the need to secure fundamental data from LiDAR measurement for the era from the Three Kingdoms to Unified Silla in which recovery, maintenance, etc., in addition to the actual surveys, are unfulfilled due to the sites being mainly distributed in mountainous areas. For this, LiDAR measurement was executed for the area of Jangsan Ancient Tombs and Chunghyo-dong Ancient Tombs in Seoak-dong, Gyeongju, to review the distribution and geographical conditions of ancient tombs. As a result, in the Jangsan Ancient Tombs, in which a precision archaeological (measurement) survey was already executed, detailed geographic information and distribution conditions could be additionally identified, which could not be known only with the layout indicated by the topographic map of the existing report. Also, in the Chunghyo-dong Ancient Tombs, in which an additional survey was not conducted after 10 tombs were found during the Japanese colonial period, the location of the ancient tombs initially excavated was accurately identified, and the status and additional information was acquired, such as on the conditions of ancient tombs not surveyed. Such information may also be used as fundamental data for the preservation and maintenance of future ancient tombs in addition to the survey and study of the ancient tombs themselves. LiDAR measurement is most effective for identifying the condition of ancient tombs in mountainous areas where observation is difficult or access is limited due to the forest zone. It may be executed before on-site surveys, such as archaeological surveys, to secure data with high availability as prior surveys or pre-surveys. Therefore, it is necessary to secure fundamental data from LiDAR measurement in future surveys of ancient tombs and to establish a survey and maintenance/utilization plan based on this. To establish survey/study and preservation/maintenance measures for ancient tombs located in mountainous areas, a precision archaeological survey is currently executed to draw up a distribution chart of ancient tombs. If LiDAR measurement data is secured before this and used, a more effective and accurate distribution chart can be drawn up, and the actual conditions can be identified. Also, most omissions or errors in information can be prevented in on-site surveys of large regions. Therefore, it is necessary to accumulate fundamental data by actively using LiDAR measurement in future surveys of ancient tombs.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.552-561
• /
• 2023

The seafloor topography of Gomso Bay on the west coast of Korea was investigated using subtidal bathymetry and tidal-flat altimetry. Gomso Bay consists of 80% tidal flats and 20% subtidal zone, and is divided into an outer bay and an inner bay by the Jujincheon esturary channel. The outer bay tidal flat, has few tidal channels, has a concave topographic profile, and is characterized by the development of chenier and intertidal sand bars, giving it the appearance of gently sloping, dissipative beaches. The inner bay tidal flat has wide upper and middle tidal flats with a well-developed tidal channel system without cheniers. Moreover, the topographical cross-section between these tidal channels is convex upward, and shows the characteristics of a depositional environment greatly influenced by tidal channels and tidal action. An analysis of the horizontal movement of the tidal flat environment over the past 37 years investigating changes in the iso-depth lines in the Gomso-Bay tidal flat between 1981 and 2018 revealed that the Gomso-Bay tidal flat retreated gradually landward. As a result of analyzing the erosion and sedimentation characteristics of Gomso Bay, assuming that most of the water depth changes were due to changes in the elevation of the sea floor and sea level, an average of 1 cm (0 mm/y) of sediment was eroded in the outer bay over the past 37 years (1981-2018), In the inner bay, an average of 50 cm (14 mm/y) was deposited. Notably, the high tidal flats of the outer bay were largely eroded. Monitoring photographs of the coast showed that most of the erosion of the high tidal flats in the outer bay occurred in a short period around 1999 (probably 1997-2002), and that the erosion resulted from the erosion of sand dunes and high-tide beaches caused by temporarily greatly raised high tide levels and storms.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.263-275
• /
• 2023

Chum salmon (Oncorhynchus keta) is a species which returns to Korea for spawning and was produced as seed production at the Fisheries Resources Agency located in Uljin-gun, Gyeongsangbuk-do to preserve the species. However, farmed chum salmon showed symptoms of bacterial infection. Therefore, in this study, bacteria were isolated to identify the causative agent from chum salmon in October 2021. The isolated bacteria were identified based on the sequences of 16S rDNA, rpoD (RNA polymerase sigma factor σ⁷⁰), and vapA (A-layer) genes. Also, salinity-growth curve, biochemical characterization, antibiotic susceptibility test, and pathogenicity analysis were performed in four strains. As a result, four isolated strains were identified as Aeromonas salmonicida subsp. salmonicida. Additionally, the bacterial strains showed a decrease in growth as the salt concentration increased in the medium. All of the isolated strains exhibited γ-hemolysis, and the same biochemical properties. In the antimicrobial susceptibility test, all strains showed an inhibition zone of 40 to 44 mm for oxolinic acid, flumequine, and florfenicol. Pathogenic factors were assessed by RT-PCR at the mRNA level, and found that the four strains expresses the outer membrane ring of T3SS (ascV), inner membrane ring of T3SS (ascC), vapA, enterotoxin (act), and lipase (lip) genes which are well known to significantly contribute to the pathogenicity of A. salmonicida. The results of this study can be used as basic data to prevent A. salmonicida subsp. salmonicida occurring in sea-chum salmon in the future.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2009

Export fluxes of particulate organic carbon were estimated for the first time by using $^{234}Th/^{238}U$ disequilibrium in the southwestern East Sea during August 2007. They were calculated by multiplying POC/$^{234}Th_p$ ratios of sinking particles (larger than 0.7 ${\mu}m$) obtained from 150-200 m water depths to $^{234}Th$ fluxes that were estimated by integrating $^{234}Th/^{238}U$ disequilibrium from surface to 100 m water depth. Export fluxes ranged from 14 to 505 mg C $m^{-2}$ $day^{-1}$, with the highest value at station A2 and the lowest value at station D4. Primary production was well correlated with export flux, indicating that it was a major factor controlling export flux. Export flux in the East Sea was generally higher than those estimated in the open ocean and similar to or somewhat higher than those in the continental marginal seas. Export flux/primary production (EF/PP) ratios varied from 0.29 to 0.62, with an average of 0.43 and were somewhat higher in the basin area than in the coastal area. EF/PP ratio in the East Sea was rather similar to those estimated in the North Sea and Chukchi Sea, but much higher than those in the Labrador Sea, Barents Sea, and Gulf of Lions. Therefore, the East Sea is one of the major areas where a large amount of organic carbon produced in the euphotic zone sinks into the deep layer below 200 m water depth.

• Journal of the Daesoon Academy of Sciences
• /
• v.47
• /
• pp.173-202
• /
• 2023

In this study, we delve into the potential for innovative cultural education techniques that utilize the timeless tales of Princess Bari and The Tale of Shim Cheong as tailored for the upcoming generations of overseas Korean learners. With a rising number of young overseas Koreans born and raised in their host countries, there emerges a pressing need to craft an educational framework that resonates with the evolving dynamics of their generation. Our endeavor revolves around proposing educational strategies that help solidify identity while carefully considering the intrinsic motivation prevalent among most overseas Koreans. Naturally, the choice of employing the classic epics Princess Bari and The Tale of Shim Cheong as educational resources was deliberate. These narratives are rich in rites of passage and offer profound insights into the transformative journey of their protagonists. Both characters are affluent women in patriarchal societies, and both embark on quests to redefine themselves through new relationships, liberating themselves from the confines of parental ties. This narrative framework provides a unique opportunity for overseas Koreans who are often adrift in the social fabric of their adopted countries. These stories inspire them to introspect and contemplate their own identities. By intertwining their personal narratives with the empowering stories of characters, students are provided a chance to reaffirm their authentic selves. Therein, a paradigm shift can occur that allows individuals to embrace the core elements that define them. Our ultimate objective was to enable students to explore their own stories and immerse themselves in the intricate narratives of classical works. This immersive experience fosters a profound sense of unity with the characters and paves the way for a comprehensive educational plan. This plan not only celebrates the hybrid nature of identity but also cultivates a deep sense of positivity within amalgamated 'subjects.' Such an approach not only fosters a stronger connection with one's heritage but also sparks a genuine curiosity about and affinity for the rich cultural tapestry of one's home country. It's not just education; it's a transformative journey that enriches the lives of overseas Koreans and nurtures a profound bond with their cultural roots.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.243-251
• /
• 2024

In this study, a surface geological survey was first conducted to investigate aggregate resources in the Yeongam area of Jeollanam-do, and a drilling survey was conducted in the lower part of the surface, which was difficult to identify through a surface geological survey, to determine the spatial distribution of aggregates. Drilling sites were selected considering the topographical development and Quaternary alluvium characteristics of the study area, and river aggregate drilling surveys were conducted at a total of 5 points and land aggregate drilling surveys were conducted at a total of 28 points. Borehole core sediments were classified into seven sedimentary units to determine whether they could be used as aggregates, and optically stimulated luminescence dating was performed on representative boreholes to measure the depositional period for each sedimentary unit. As a result of the study, most of the Yeongam area had a very wide river basin, so it was estimated that there would be a large amount of aggregate, but the amount of aggregate was evaluated to be very small compared to other cities and counties. Most of the unconsolidated sedimentary layers in the Yeongam area are composed of blue-grey marine clay with a vertical thickness of more than 10 m. The sand-gravel layer corresponding to the aggregate section is distributed in the lower part of the marine clay, thinly covering the bedrock weathering zone. This is because the amount of aggregates themselves is small and most of the aggregates are distributed at a depth of 10 m below the surface, which is currently difficult to develop, so the possibility of developing aggregates is evaluated to be very low. As a result of dating, it can be seen that the blue-grey marine clay layer is an intertidal sedimentary layer formed as the sea level rose rapidly about 10,000 years ago. The deposition process continued from 10,000 years ago to the present, and as a result, a very thick clay layer was deposited. This clay layer was formed very dominantly for about 6,000 to 8,000 years, and the sand-gravel layer in the section where aggregates deposited in the Pleistocene period can exist was measured to have been deposited at about 13.0 to 19.0 ka, and about 50 ka, showing that it was deposited as paleo-fluvial deposits before the marine transgression process.

• Analyses & Alternatives
• /
• v.8 no.2
• /
• pp.65-86
• /
• 2024

This study delves into the geopolitical tensions surrounding Ukraine throughout modern European history, aiming to shed light on its significance in geopolitical discourse. Since the 19th century, European powers, particularly the Anglo-Saxons and Germans, have formulated distinct geopolitical strategies concerning the Eurasian continent, with Ukraine at its focal point. The Crimean War and the German-Soviet War serve as key events to analyze these powers' geopolitical ambitions and interests. The British Empire, driven by its doctrine of thwarting land powers with sea power, intervened in the Crimean War against Russia. Its objective was to disrupt Russian dominance over Ukraine, thereby hindering Russian expansion into the Black Sea and Central Europe. On the other hand, the Third Reich of Germany, fixated on creating a European sphere exclusive from Anglo-Saxon sea powers and the Russian land power, initiated the German-Soviet War. This move aimed to secure a vast territory, including Ukraine, to facilitate expansion into the Caucasus and establish a buffer zone against the Soviet Union. Three key insights emerge from this analysis. Firstly, the absence of a dominant power rooted in Ukraine since the fall of the Principality of Kiev made geopolitical clashes inevitable. Secondly, these clashes ultimately result in a hollow victory for all involved parties, signifying the high costs and minimal gains of such confrontations. Lastly, the root cause of these clashes lies in the discord between exclusive geopolitical visions that fail to accommodate sustainable coexistence among diverse geopolitical spheres. In essence, the study underscores Ukraine's pivotal role in shaping European geopolitics and highlights the recurring clashes driven by competing visions of dominance and control over its territory. From the Crimean War to the German-Soviet War, the struggle for influence over Ukraine reflects broader geopolitical dynamics and the pursuit of strategic advantage by major powers. Ultimately, the study emphasizes the enduring significance of Ukraine in European geopolitics and the complexities inherent in managing its geopolitical tensions.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.278-284
• /
• 2023

Recently, a closed-type plant factory has been receiving attention as a advanced agricultural method. It has diverse advantages such as climate-independence, high productivity and stable year-round production. However, high energy cost caused by environmental control system is considered as a challenges of a closed-type plant factory. In order to reduce the energy cost, investigation about energy load which is directly connected to energy consumption needs to be conducted. In this study, energy load changes of a plant factory have been analytically analyzed according to the environmental changes. The target plant factory was a lettuce growing container farm. Firstly, the impact of photoperiod, set temperature and relative humidity change were examined. Under the climate condition of Daejeon in South Korea, increase of photoperiod and set temperature rose a yearly energy demand of a container farm. However, increase of set relative humidity decreased a yearly energy demand. Secondly, the climate environment effect was compared by investigating the energy demand under 9 different climate conditions. As a result, the difference between maximum and minimum value of the yearly energy demand showed 21.7%. Lastly, sensitivity analysis of each parameter (photoperiod, set temperature and relative humidity) has been suggested under 3 different climate conditions. The ratio of heating and cooling demand was varied depending on the climate, so the effect of each parameter became different.

• Journal of Bio-Environment Control
• /
• v.33 no.2
• /
• pp.88-98
• /
• 2024

This study provides basic data on the growth and production of seedlings produced in plant factories with artificial lighting by comparing seedling quality, growth and fruit characteristics, and production after transplanting cucumber seedlings according to environmental differences between plant factories with artificial lighting and conventional nurseries in greenhouse. The control group consisted of greenhouse seedlings (GH) grown in the conventional nursery before transplanting. Plant factory to greenhouse seedlings (PG) were grown for 9 days in a plant factory with artificial lighting and for 13 days in an conventional nursery. Plant factory seedlings (PF) were grown in a plant factory with artificial lighting for 22 days until planting. In terms of seedling quality, PFs had the highest relative growth rate and compactness and the best root zone development. After transplanting PFs tended to grow faster, the first harvest date was 2 days earlier than that of GHs, and the growing season ended 1 day earlier. The female flower flowering rate of the PFs was high, and the fruit set rate was of PF the lowest. The production per unit area was highest for PFs at 10.23kg Performance index on the absorption basis, the most sensitive chlorophyll fluorescence parameter, was highest at 4.14 for PFs at 4 weeks after transplantation. By comparing the maximum quantum yield of primary PS II photochemistry and dissipated energy flux per PS II reaction center electron at 4 weeks after transplantation, PFs tended to be the least stressed. PFs had the best seedling quality, growth, and production after planting, and fruit quality was consistent with that of greenhouse seedlings. Therefore, plant factory seedlings can be used in the field.

• Journal of Bio-Environment Control
• /
• v.33 no.3
• /
• pp.156-162
• /
• 2024

This study was conducted to investigate the effect of rooting volume on the productivity of fresh shoots when growing rosemary in multi-layer cultivation. The 10 cm middle cuttings from which the common rosemary (Rosmarinus officinalis L.) apical bud was removed were planted in a 128-hole tray, rooted, and then transplanted into pots of 125, 200, 550, 750, 1,300, and 2,000 mL to determine the growth characteristics and quantity of young shoots of 1-year-old and 2-year-old rosemary. In the case of 1-year-old rosemary, there was no clear difference in initial growth (30 days after transplanting) between treatments in pot size larger than 550 mL, in the case of 2-year-old rosemary, growth tend to be proportional as the pot became larger. The fresh weight of the underground part of 1-year-old and 2-year-old rosemary was the lowest at 6.9 g and 24.4 g, respectively, when surveyed on July 25 in a 550 mL container, and 10.3 g and 24.9 g, respectively, when surveyed on November 24, and there was a difference between treatments in containers of 750 to 2,000 mL. On the other hand, in the case of 1-year-old rosemary, the fresh weight of the above-ground part increased as the pot became larger, but there was no statistical difference above 1,300 mL, and the fresh weight of 2-year-old rosemary was also significantly higher as the pot became larger. The quality of young shoots was the best for 1-year-old rosemary in a pot of 2,000 mL, but for 2-year-old rosemary, there was a difference in quality depending on the season. Shoot productivity per unit pot was highest at 1,300 mL, but when converted to per unit area, the best was observed at 750 mL. Therefore, the most suitable pot size for intensive production through multi-layer cultivation of rosemary young shoots is judged to be 750 mL (12.5 × 11.5 cm).