• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.1-5
• /
• 2000

Cathodoluminescence(CL) properties of ZnO:Zn green phosphor were investigated. ZnO:Zn phosphor was synthesized by varying reducing agents and firing temperatures. ZnS, charcoal and 5% H2 gas mixed with 95% N2 gas(5H2-95N2) were used as the reducing agent and atmosphere. The highest CL intensity of ZnO:Zn phosphor was observed under the condition of 5H2-95N2 atmosphere and firing temperature of 90$0^{\circ}C$ for 1h. Charocal and ZnO as reducing agents in the syntehsis of ZnO:Zn phosphor exhibited about 60% and 40%, respectively, of the CL intensity obtained with 5H2-95N2 atmosphere.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.406-409
• /
• 2004

A blue phosphor(ZnS:Cu) is manufactured by solid state reaction for ACPEL(AC powder EL). The effect of artificial defect on phosphor surface on the ZnO phase conversion and resulting luminescence have been studied. It was found that ZnS:Cu could converse to cubic phase more easily due to the formation of artificial defect on 1st fired phosphor by ball-milling process, resulting in improvement of luminescence of phosphor phosphors under the driven EL condition. We found out an optimized ball-mill condition through considering effect of each ball-mill conditions such as milling time and milling rpm on defect. Also we determined relationship between emission luminescence and phase of phosphor based on analyses of crystal structures of phosphors. A significant improvement above 30% was observed in electroluminescence by the artificial defect on ZnS:Cu phosphors compared to non-treated phosphors.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2523-2528
• /
• 2012

Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.403-406
• /
• 1998

Electroluminescence(EL) come from the light emission obtained by electrical excitation energy passing through a phosphor layer under applied high electrical field. The preparation and characterizations of light emitting ACPEL(alternating-current powder electroluminescent) cell based on two kinds of phosphor mixed ZnS:Mn, Cu and ZnS:Cu phosphor. Basic structure is ITO/Mixed Phosphor/insulator/Al sheet, each layer was mixed by binder, which concentration 11p for phosphor, 8p for insulator. Dielectric properties was investigated first and emission properties of P-LED based on ZnS:Mn,Cu/ZnS:Cu,Br mixture. Emission spectra exhibits two kinds of main peaks at 100V, 1kHz sinusoidal excitation.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.2
• /
• pp.64-67
• /
• 2004

In this paper, to discover the brightness improvement of ZnS:Cu powder electroluminescence (EL), a new structure is proposed in which phosphor and dielectric are mixed between electrodes. Dielectric and phosphor material are BaTiO$_3$ and ZnS:Cu, respectively. The effect of the mixed layer on EL sample is considered the improvement of source efficiency. Although the number of electrons introduced into the phosphor increases only modestly, the high electric field region of phosphor grains increases comparatively in the characteristics of brightness-voltage. Furthermore, the relaxation occurs through leading and trailing edge pairs, which is relatively efficient in characteristics of decay time. With these results, we found that the brightness of newly proposed ZnS:Cu powder electroluminescence was 167.24 cd/$m^2$ at ac voltage of 100V and frequency of 400Hz.

• Electrical & Electronic Materials
• /
• v.10 no.2
• /
• pp.150-155
• /
• 1997

Powder type electroluminescent device(P-ELD) in this study was prepared by printing method. P-ELDs were basically composed of phosphor, insulator and transparent conducting layer. The phosphor powder was prepared by sintering the mixture of ZnS as a host, Cu as an activator, and NaCl as a flux for co-activator and enhancement of growth of the phosphor particles. The phosphor layer was made by printing the paste of the cyanoethylpullan as a binder and the ZnS system phosphor powder. In order to evaluate the luminescence characteristics of ZnS P-ELD, applied voltage - luminance(V-L), frequency-luminance(f-L), and relative luminance spectra(L- .lambda.) characteristics were measured. The experimental results show that luminance increased with increasing the applied voltage and frequency. It can be explained in terms of the potential barrier formed between ZnS and CuS. Two emission peaks in luminance-wavelength spectra measured at applied voltage of 100 $V_{rms}$ were observed at 500nm as a primary peak and 460nm as a secondary peak, respectively.y.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.102-105
• /
• 2004

With varying rapid thermal annealing (RTA) temperature, luminescent properties of ZnMgS:Mn thin film sputter-deposited with one target were measured. Although all samples have the same composition, $Zn_{1-x}Mg_xS:Mn$ (x=0.25) can emit luminescence between 580 and 614 nm, which is controlled by only RTA temperature. It is understood that the energy band gap shift of ZnMgS:Mn thin film phosphor occurs with varying RTA temperature.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.125-125
• /
• 2009

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1537-1538
• /
• 2007

ZnS:Cu,Cl phosphor was synthesized by solid-liquid state reaction with two firing steps. Each stage of the process was carefully monitored so that the final product was comparable to commercially-available phosphor. The effect of $Cu^{2+}-doping$ concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electroluminescent device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.424-425
• /
• 2006

Zinc sulfide is a well-known host material of phosphor emitting different radiations dependent on different doping impurities of metallic ion. It emits green, blue, orange-yellow or white colors by doping with activators such as copper, silver, manganese and so on. In this study, manganese, copper and chlorine doped ZnS phosphor (ZnS:Mn,Cu,Cl) was synthesized by solid-state reaction method. The optical properties were investigated according to different concentrations of sulfur and activators used during the synthesis process.