• 대한화학회지
• /
• 제53권6호
• /
• pp.677-682
• /
• 2009

본 논문에서는 ZnS:Mn/ZnS 코어-쉘 양자점을 유기금속전구체의 열분해 방법으로 합성하였다. 쉘의 형성온도를 135$^{\circ}C$로 고정한 반면 코어 나노입자의 합성 온도 조건을 다양화 하여 각 조건하에서 형성된 양자점들의 특성을 조사하였다. 실험을 통해 얻은 양자점들은 UV-Vis, 액체 photoluminescence (PL) spectroscopy 방법으로 광 특성을 조사하였으며, 또한 XRD, HR-TEM, 및 EDXS 분석으로 입자크기와 조성 등을 측정하였다. 실험 결과 가장 좋은 광 특성을 보인 나노입자의 합성조건은 코어와 쉘 모두 135$^{\circ}C$인 것으로 밝혀 졌으며, 이 조건에서 얻은 양자점은 583 nm 의 PL 발광 피이크와 42.15%의 높은 양자효율을 나타내었다. HR-TEM 으로 측정한 ZnS:Mn/ZnS 양자점의 평균 입자크기는 지름이 약 4.0 - 5.4 nm 정도였으며, 특히 150$^{\circ}C$의 온도 조건에서는 타원형의 입자가 형성되는 것이 관찰되었다.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.27-31
• /
• 2011

ZnS:Mn yellow phosphors doped with Sm for white light emitting diodes were synthesized by solid state reaction method. These sample showed the characteristic X-ray diffraction patterns for main peak (110) of ZnS:Mn,Sm. Photoluminescence excitation spectra originated from $Mn^{2+}$ were ranged from 450 nm to 500 nm. The yellow emission at around 580 nm was associated with $^4T_1{\rightarrow}^6A_1$ transition of $Mn^{2+}$ ions in ZnS:Mn,Sm phosphors. The highest photolum inescence intensity of the phosphors under 405 nm and 450 nm excitation was obtained at Sm concentration of 1 mol%. The enhanced photoluminescent intensity in the ZnS:Mn,Sm phosphors was interpreted by energy transfer from Sm to Mn. The highest luminescent intensity of white LED was obtained at the epoxy-to-yellow phosphor ratio of 1:3. At this ratio, the CIE chromaticity of the white LED was X=0.3886 and Y=0.2928.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권12호
• /
• pp.1804-1808
• /
• 2003

A layer experiment was conducted to determine the effects of supplementary methionine chelates (Cu, Zn and Mn), individual or in combination, on laying performance, eggshell quality, gizzard erosion, and IgG level of serum for 8 weeks. Five hundred 96-wk-old force molted ISA Brown layers were assigned to five dietary treatments. Basal diet was formulated to meet or exceed the nutrients requirements listed in NRC (1994). Five experimental diets were control, Zn-methionine chelate (Zn-Met) supplemented, Cumethionine chelate (Cu-Met) supplemented, Zn-Mn-methionine chelate (Zn-Mn-Met) supplemented and Zn-Mn-Cu-Met supplemented diet. Each treated diet was supplemented with respective mineral(s) at the level of 100 ppm in the form of methionine chelate. Egg production was increased by Cu-Met supplementation but decreased by Zn-Met supplementation. Egg weight was significantly (p<0.05) lower in Cu-Met treatment than those of the control and Zn-Met treatment. Specific gravity of eggs and eggshell strength were highest and soft egg production was lowest in Cu-Met treatment. Gizzard erosion index was significantly increased by supplementation of Cu-Met, Zn-Mn-Met or Zn-Mn-Cu-Met. Zinc content in liver significantly increased by Zn-Met, but not by Zn-Mn-Cu-Met treatment. In conclusion, 100 ppm Cu in Cu-Met chelate improved laying performance and eggshell quality but also increased gizzard erosion index. Supplementation of Zn-Met or its combination with other mineral chelates had no beneficial effects on laying performance and eggshell quality.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1091-1096
• /
• 2007

Water dispersible ZnS:Mn nanocrystals were synthesized by capping the surface of the nanocrystals with four kinds of aminoacids ligands: arginine, cystein, histidine, and methionine. The aminoacids capped ZnS:Mn nanocrystal powders were characterized by XRD, HR-TEM, EDXS, and FT-IR spectroscopy. The optical properties of the aminoacids capped ZnS:Mn colloidal nanocrystals were also measured by UV/Vis and solution photoluminescence (PL) spectroscopies in aqueous solvents. The solution PL spectra showed broad emission peaks around 575 nm (orange light emissions) with PL efficiencies in the range of 4.4 to 7.1%. The measured particle sizes for the aminoacid capped ZnS:Mn nanocrystals by HR-TEM images were in the range of 5.3 to 11.7 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.815-818
• /
• 2002

Mn doped hexagonal phase of ZnS has been studied as a yellow-orange phosphor for the application to fluorescent displays operated at low voltages. It was found that luminescence from $Mn^{2+}$ was increased as the Mn concentration was increased up to1.2 mol% of host lattice. This study has been attempted by adding trivalent ions such as $Al^{3+}$ or $Bi^{3+}$ to ZnS:Mn as an agent to do the efficient incorporation of Mn ions into ZnS:Mn lattice, resulting in a significant improvement in the phosphor performance, especially at low voltages.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.206-206
• /
• 2009

RF Magnetron Sputtering 방법을 통해 ZnS:Mn 박막 형광체를 증착한 다층 TFEL (Thin-Film Electroluminescent) Backlight 소자를 제작하였다. Alumina 기판 위에 Au 전극과 PMN 후막 유전체를 Screen printing 기법으로 층을 형성하였다. 그 위에 MgO 박막 유전체를 E-Beam 장비를 이용하여 증착 후, ZnS:Mn 박막 형광체를 50 W 의 저전력으로 약 8000 ${\AA}$ 두께로 증착하였다. 형광체는 Sputter 증착 시 Sulfur 부족 현상을 보상해주기 위해 ZnS:Mn (0.5%) Target 에 2 at % 의 Sulfur를 첨가하였으며, 상부 전극으로 사용할 ITO 는 DC Magnetron Sputter 를 이용하여 증착하였다. 어닐링 공정은 Air 분위기에서 급속 열처리 장치 (RTA, Rapid Thermal Annealing) 을 이용하여 600 $^{\circ}C$에서 20 분 진행하였다. 이러한 과정들을 통해 저전압 고휘도의 TFEL Backlight 소자를 제조할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1599_1600
• /
• 2009

ZnS:Mn 나노입자가 포함된 PVP 고분자 하이브리드 나노사를 전기방사법으로 제작하였다. 하이브리드 나노사의 표면 특성은 주사 전자 현미경으로 관측하였으며, 형광분광광도계와 공초점 주사현미경 (CLSM)을 이용하여 하이브리드 나노사의 발광특성을 조사하였다. 순수한 PVP 나노사와 하이브리드 나노사의 photoluminescence (PL) 스펙트럼 비교를 통하여, 586 nm에서 관찰된 PL 피크는 ZnS:Mn 나노입자에서 기인되었음을 알 수 있었으며, CLSM을 이용하여 ZnS:Mn 나노입자의 발광을 이미지화 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.124-125
• /
• 2005

ZnS:Mn thin films have attracted great interest as electroluminescence devices. In this study, inductively coupled BCl$_3$/Ar plasma was used to etch ZnS:Mn thin films. We obtained the maximum etch rate of ZnS:Mn thin films was 2209 ${\AA}$/min at a BCl$_3$(20%)/Ar(80%) gas mixing ratio, an RF power of 700 W, a DC bias voltage of-250 V, a total gas flow of 20 sccm, and a chamber pressure of 1 Pa. It was proposed that sputter etching is dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching products.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1997-2002
• /
• 2010

ZnSe and ZnS:Mn nanocrystals were synthesized via the thermal decomposition of their corresponding organometallic precursors in a hot coordinating solvent (TOP/TOPO) mixture. The organic surface capping agents were substituted with EDTA molecules to impart hydrophilic surface properties to the resulting nanocrystals. The optical properties of the water-dispersible nanocrystals were analyzed by UV-visible and room temperature solution photoluminescence (PL) spectroscopy. The powders were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), and confocal laser scanning microscopy (CLSM). The solution PL spectra revealed emission peaks at 390 (ZnSe-EDTA) and 597 (ZnS:Mn-EDTA) nm with PL efficiencies of 4.0 (former) and 2.4% (latter), respectively. Two-photon spectra were obtained by fixing the excitation light source wavelengths at 616 nm (ZnSe-EDTA) and 560 nm (ZnS:Mn-EDTA). The emission peaks appeared at the same positions to that of the PL spectra but with lower peak intensity. In addition, the morphology and sizes of the nanocrystals were estimated from the corresponding HR-TEM images. The measured average particle sizes were 5.4 nm (ZnSe-EDTA) with a standard deviation of 1.2 nm, and 4.7 nm (ZnS:Mn-EDTA) with a standard deviation of 0.8 nm, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.291-291
• /
• 2009

ZnS:Mn/Cu,Cl 계 나노 형광체의 특성을 살펴보았다. 실험에서는 ZnS:Mn 과 ZnS:Cu,Cl 형광체 파우더를 이용하여 밀링을 통하여 분쇄하여 EL 소자를 제작하였다. 형광체 파우더를 볼밀에 $\Phi5mm$의 지르코나이 볼과 에탄올과 함께 넣고 2, 4, 6, 8, 10일간 밀링을 하였다. 밀링한 형광체 파우더를 SEM을 통하여 파우더의 사이즈를 관찰하였다. 또 이 파우더를 이용하여 EL 소자를 제작하였다. 소자의 구조는 기판은 알루미나 기판을, 하부 전극은 Au, 유전체는 $BaTiO_3$ 유전체 페이스트를 사용하였으며, 형광체 적층 후 ITO 전극을 스퍼터를 이용하여 증착하여 제작하였다. 제작한 소자를 이용하여 소자의 휘도 등 발광 특성을 살펴보았다.