• Microbiology and Biotechnology Letters
• /
• v.34 no.4
• /
• pp.323-328
• /
• 2006

A bacterium producing the extracellular protease was isolated from insect-eating plant and has been identified as a member of the genus Bacillus based on partial 165 rRNA sequences. In order to develop the medium composition, effects of ingredients including nitrogen sources, carbon source, metal ions and phosphate were examined for protease production of the isolate, SH-8. Soluble starch increased the protease productivity, while glucose repressed it. Yeast extract was effective nitrogen source for enzyme production, but the pretense production of Bacillus sp. SH-8 was reduced by large amount of yeast extract. The calcium was found to induce pretense activity as well as protease productivity. However, cell growth and enzyme production was completely inhibited by divalent ions such as $Zn^{2+}$, $Cu^{2+}$, $Co^{2+}$ and $Mn^{2+}$. The maximum protease productivity was reached 435 unit/ml in the optimized medium consisting of soluble starch (2%), yeast extract (0.3%), $CaCl_2$ (0.3%), $K_2HPO_4$ (0.01%) and $KH_2PO_4$ (0.01%). The pretense activity of culture filtrate was dramatically decreased after incubation for 26 h.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.377-384
• /
• 2009

Among 27 Bacillus sp. isolated from Meju, a traditional Korean soybean fermented food, a strain MJ-226 was selected due to its strong fibrinolytic activity, and it was identified to be Bacillus subtilis MJ-226 according to morphological and biochemical characterization and sugar utilization. The fibrinolytic enzyme of B. subtilis MJ-226 was maximally produced by cultivating in the Tryptic Soy Broth (TSB) for 24~26 h at $37^{\circ}C$, and the enzymes activity was promoted with adding glucose, fructose, peptone or yeast extract to TSB. The fibrinolytic enzyme was stable at the range of pH from 6.0 to 8.0, and between 35 and $40^{\circ}C$. Also, when the crude enzyme was exposed to various metal ions and chemical inhibitors for 12 h, the enzyme stability was maintained by $MnSO_4$, $CaCl_2$, KCl, and NaCl. However, the stability was destroyed by treatment with $CuSO_4$, $MgSO_4$, $ZnSO_4$, $FeSO_4$, and $BaCl_2$, and the enzyme was unstable in the presence of chemical inhibitors such as iodoacetic acid, leupeptin, phenylmethanesulphonyl fluoride (PMSF), sodium dodecyl sulfate (SDS), thiourea, trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) and ethylenediaminetetraacetic acid (EDTA).

• KSBB Journal
• /
• v.14 no.1
• /
• pp.96-102
• /
• 1999

Marine bacterium Bacillus cereus ASK202 produced an extracellular agarase (E.C.3.2.1.81) which showed a high level of enzyme activity in the presence of agar and agarose. In the optimal culture conditions, the agarase production increased 7.7 folds compared with the one obtained from the basal medium. Agarase production reached upto 160 units/L after 24hr of cultivation in a modified marine medium at $25^{\circ}C$. The degree of purification increased 31.5 folds with 27.8% yield through freeze drying, DEAE Sepharose CL-6B and Superose 6HR 10/30 column chromatography. The molecular weight of the purified agarase was determined to be 90,000 daltons by gel-permeation filteration. Optimal temperature and pH for the enzyme activity were $40^{\circ}C$ and 7.8, respectively. The enzyme was stable up to $50^{\circ}C$ and at a broad pH range of 5.0-10.0. The $\beta$-agarase was activated by $Zn(NO_3)_2$, and was inhibited by $CuSO_4$ and $SnCl_2$. The Km and Vmax values of this enzyme for agarose as a substrate was $2.4mg/m\ell$ and 13.6 mg/m$\ell$, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.1
• /
• pp.11-19
• /
• 1991

This study was carried out to develop the low-priced adsorbent by synthesizing the zeolite of high CEC with the natural zeolite and examining the ability of this zeolite to adsorb heavy metals. The dominant clay minerals were clinoptilolite and mordenite in natural zeolite, while phillipsite in the synthesized zeolite. Adsorption reaction of Cu and Zn on clays were reached to equilibrium after 1 hr. The amount of adsorption was increased as the concentrations of heavy metals or the initial pH of suspension was increased. The synthesized zeolite adsorbed heavy metals about twice as much as the natural zeolite. The adsorption of heavy metals on the synthesized zeolite was less affected by the initial pH of suspension than that on natural zeolite. At cumulative adsorption, the synthesized zeolite adsorbed much more heavy metals at early three treatments than the natural zeolite did. The amount of desorption by chloride salts was increased as the concentration of chloride salts was increased. The ability of salt to desorb was in the order of NaCl>$CaC1_2$>$AlC1_3$. It is estimated that the ability of the synthesized zeolite to remove heavy metals was better than that of the natural zeolite.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.333-341
• /
• 1983

Tannase of Aspergillus sp. AN-11 isolated from contaminated acorns was purified by a procedure involving ammonium sulfate precipitation, DEAE-cellulose column chromatography and Sephadex G-200 gel filtration. Physiochemical properties of the purified tannase was investigated. Tannase was purified about 37 folds with the yield of 49% from the culture broth of Aspergillus sp. AN-11. The purified tannase was homogeneous on polyacrylamide gel disc electrophoresis and was dissociable into two identical subunits on SDS-polyacrylamide gel electrophoresis. The molecular weight of the tannase was determined to be 200,000 by gel filtration on Sephadex G-200. The purified tannase showed a typical protein ultraviolet spectrum. The enzyme had a optimum pH 5.5 and optimum temperature at 30 to $40^{\circ}C$. The enzyme was stable at a pH range from 5.0 to 6.5 and at the temperature below $30^{\circ}C$. The enzyme was inactivated remarkably by $CuCl_2$ and $ZnCl_2. The Km value of the enzyme was $7.58{\times}10^{-4}\;M$.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.1-26
• /
• 1994

The purpose of this study was to investigate the dissolution components during corrosion of amalgams and to identify surface corrosion products in the modified Fusayama artificial saliva. Four type of amalgam alloys were used: low copper lathe cut amalgam alloy (Cavex 68), low copper spherical amalgam alloy (Caulk Spherical Alloy), high copper admixed amalgam alloy (Dispersalloy) and high copper single composition amalgam alloy (Tytin). Each amalgam alloy and Hg were triturated according to the manufacturer's direction by means of mechanical amalgamator (Capmaster, S.S.White), and then the triturated mass was inserted into the cylindrical metal mold which was 10mm in diameter and 2.0mm in height and condensed with compression of 150kg/$cm^2$ using oil pressor. The specimens were removed from the mold and stored at room temperature for 7 days and cleansed with distiled water for 30 minutes in an ultrasonic cleaner. The specimens were immersed in the modified Fusayama artificial saliva for the periods of 1 month, 3 months and 6 months. The amounts of Hg, Cu, Sn and Zn dissolved from each amalgam specimen immersed in the artificial saliva for the periods of 1 month, 3 months and 6 months were measured using Inductivity Coupled Plasma Atomic Emission Spectrometry (ICPQ-1000, Shimadzu, Japan) and amount of Ag dissolved from amalgam specimen was measured using Atomic Absorption Spectrophotometry (Atomic Absorption/Flame emission spectrophotometer M-670, Shimadzu, Japan). A surface corrosion products of specimens were analysed using Electron Spectroscopy Chemical Analyser (ESCA PHI-558, PERKIN ELMER, U.S.A.). The secondary image and back scattered image of corroded surface of specimens was observed under the SEM, and the corroded surface of specimens was analysed with the EDX. The following results were obtained. 1. The dissolution amount of Cu was the most in high copper admixed amalgam(Dispersalloy) and the least in high copper single composition amalgam(Tytin). 2. Sn and Zn were dissolved during all the experiment periods, and dissolution amounts were decreased as the time elapsed. 3. Initial surface corrosion products were ZnO and SnO. 4. Corrosion of ${\gamma}$ and ${\gamma}_2$ phase in low copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in low copper spherical amalgam(Caulk Sperical Alloy). 5. Corrosion of ${\gamma}$ and $\eta$' phase in high copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in high copper admixed amalgam(Dispersalloy). 6. Sn-Cl was produced in the subsurface of low copper amalgams and high copper admixed amalgam.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.555-569
• /
• 2004

Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn＇t pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.455-468
• /
• 2004

The purpose of this paper is to understand the time series and origin of a chemical component and to compare the difference during yellow sand episodes for analysis $PM_{10}$ chemical components in the region of west in Korean Peninsula, 1999-2001. An annual mean concentration of $PM_{10}$ is $29.1\;{\mu}g/m^3$. A monthly mean and standard deviation of $PM_{10}$ concentration are very high in spring but there is no remarkably seasonal variation. Also, water soluble ionic component of $PM_{10}$ be influenced by double more total anion than total cation, be included $NO_{3}^-\;and\;SO_{4}^{2-}$ for the source of acidity and $NH_{4}^+$ to neutralize. Tracer metals of $PM_{10}$ slowly increases caused by emitted for soil and ocean (Fe, Al, Ca, Mg, Na) and Zn, Pb, Cu, Mn for anthropogenic source. According to method of enrichment factor (E.F) and statistics, assuming that the origin of metal component in $PM_{10}$ most of element in the Earth's crust e.g. Mg, Ca, Fe originates soil and Cu, Zn, Cd, Pb derives from anthropogenic sources. The ionic component for $Na^{+}\;Cl^-,\;Mg^{2+}\;and\;Ca^{2+}$ and Mg, Al, Ca, Fe originated by soil component largely increase during yellow sand period and then tracer metal component as Pb, Cd, Zn decrease. According to factor analysis, the first group is ionic component ($Na^+,\;Mg^{2+},\;Ca^{2+}$) and metal component (Na, Fe, Mn and Ni) be influenced by soil. The second group, Mg, Cr also be influenced by soil particle.

• Journal of the Korean earth science society
• /
• v.27 no.3
• /
• pp.313-327
• /
• 2006

This study investigated the geochernical characteristics of Mn scale formed in groundwater wells at the Damyang area. The composition of Mn scale consists mainly of MnO and $SiO_2$. The content of Mn ranges from56.61wt.% to 68.69wt.%, and $SiO_2$ content ranges from 1.56wt.% to 10.45wt.%. The contents of Mo and Ba in Mn scale increased with increased depth; whereas, the content of Zn and Pb decreased with increased depth. Birnessite, quartz and feldspars were identified in Mn scales using x-ray powder diffraction studies. The IR absorption bands for Mn scales show major absorption band due to OH stretching, adsorbed molecular water, and birnessite stretching, respectively. In the SEM and EDS analysis, the Mn scale consists of botryoidal, spherical, spherulite, and empty straw structure. Those structure may be precipitated simply due to oversaturation with concentrated Mn content or may be formed through biogenic precipitation by Lepthothrix discophora. Under microanalysis using EDS on those structure surface of Mn scales, the Mn atomic percent range from 28 to 44, and such elements revealed the presence of Si, K, Na, Ca, Cl, Cu, Zn, and Ba.

• Toxicological Research
• /
• v.25 no.4
• /
• pp.195-201
• /
• 2009

Recent publications showed that metal nanoparticles which are made from $TiO_2,\;CeO_2,\;Al_2O_3,\;CuCl_2,\;AgNO_3$ and $ZnO_2$ induced oxidative stress and pro-inflammatory effects in cultured cells and the responses seemed to be common toxic pathway of metal nanoparticles to the ultimate toxicity in animals as well as cellular level. In this study, we compared the gene expression induced by two different types of metal oxide nanoparticles, titanium dioxide nanoparticles (TNP) and cerium dioxide nanoparticles (CNP) using microarray analysis. About 50 genes including interleukin 6, interleukin 1, platelet-derived growth factor $\beta$, and leukemia inhibitory factor were induced in cultured BEAS2B cells treated with TNP 40 ppm. When we compared the induction levels of genes in TNP-treated cells to those in CNP-treated cells, the induction levels were very correlated in various gene categories (r=0.645). This may suggest a possible common toxic mechanism of metal oxide nanoparticles.