• 한국세라믹학회지
• /
• 제20권2호
• /
• pp.135-146
• /
• 1983

This study is to investigate the properties of domestic fly ash for utilization as data in regard to fly ash which is by-product of domestic coal powder plants and the possibility of utilization as insulation material of domestic fly ash. Composition refractoriness size distribution density contents of hollow particles and crystalline phase were examined as the properties of domestic fly ash. As to the fired test pieces of fly ash by itself that varied contents of hollow particles with four kinds and of the fly ash-clay-saw dust system linear shrinkage bulk density app. porosity compressive strength thermal conductivity and structures were investigated for the possibility of utilization as an insulation material. The results are as follows : 1. The properties of the fly ash I) The constituent particle of the fly ash is spherical and it contains not a few hollow particles (floats by water 0.30-0.50 floats by $ZnCl_2$ aq.(SpG=1.71) 6.97-16.72%). ii) The chemical compositions of fly ash are $SiO_243.9-54.1%$ , $Al_2O_321.0-30.7%$ Ig loss is 7.4-24.1% and the principal of Ig loss is unburned carbon. iii) Fly ash was not suitable to use for mortar and concrete mixture because Ig. loss value is higher than 5% 2. Utilization as insulation material I) The test pieces of original fly ash floats by water floats by ZnCl2 aq(SpG=1.71) p, p t by ZnCl2 aq.(SpG=1.71) that were fired at 110$0^{\circ}C$ represented 0.11-0.18 kcal/mh$^{\circ}$ C as thermal conductivity value. ii) The test pieces which (76.5-85.5) wt% fly ash-(8.5, 9.5) wt% clay-(5.0-15.0) wt% saw dust system(68.0-72.0) wt% fly ash -(17.0-18.0)wt% clay-(10.0-15.0) wt% saw dust system and 59.5 wt% fly ash-25.5 wt% clay-15.0wt% saw dust system were fired at 110$0^{\circ}C$ the thermal conductivity was less than 0.1Kcal/mh$^{\circ}$ C. iii) In view of thermal conductivity and economic aspect insulation materials which added saw dust as blowing agent and clay as inorganic binder are better than that of fly ash as it is or separated hollow fly ash particles. iv) When the saw dust contents increased in the (59.5-90.0) wt% saw dust system and when amount of clay de-creased and firing temperature decreased under the condition of equal addition of saw dust app. porosity increased but bulk density compressive strength and thermal conductivity decreased.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.42-50
• /
• 2023

본 연구에서는 SrZn_2-xCo_xFe₁₆O₂₇ 화학식을 갖는 육방정 구조의 페라이트 분말을 고상법으로 합성하고 Co-Zn 함량 변화에 따른 전자기파 흡수 특성을 0.1-18 GHz의 주파수 범위와 0 ~ 10 mm 흡수체 두께 범위에서 평가하였다. 흡수체 두께에 따른 전자기파 흡수 특성은 고주파 복소 투자율과 유전율 측정 data로부터 전송선 이론을 기반으로 계산을 통해 반사손실 (RL)을 도출하였으며, 일부 시료에 대해서는 RL 실측정을 통해 계산된 결과와 잘 맞는 것을 보였다. Co의 치환량 (x)에 따라 고주파 복소 투자율 특성이 변화하였으며 이에 따라 전자기파 흡수 주파수 대역의 조절이 가능하였다. 또한 x = 1.0, 1.25, 1.5 시료에서는 매우 우수한 최대 전자기파 흡수 특성 (RL = -70 ~ -50 dB )을 보이며, 90% 이상의 전자기파 에너지를 흡수 (RL ≤ -10 dB) 하는 주파수 밴드 폭 또한 10 GHz 이상으로 광대역 레이다 흡수가 가능함을 보였다.

• 한국미생물·생명공학회지
• /
• 제26권4호
• /
• pp.369-372
• /
• 1998

Microbial insecticide formulations were prepared by liquid and semi-solid fermentations using Bacillus thuringiensis subsp. kurstaki, HL-106 (BTK-HL106), B. thuringiensis subsp. israelensis HL-63 (BTI-HL63) and B. sphaericus 1593 (BS-1593) strains. The liquid fermentation medium contained molasses 2%, dextrose 1.5%, peptone 2%, D-xylose 0.025%, CaCl$_2$ 0.1%, K$_2$HPO$_4$ 0.1%, KH$_2$PO$_4$ 0.1%, MgSO$_4$$.$7H$_2$O 0.03%, FeSO$_4$$.$7H$_2$O 0.002%, ZnSO$_4$$.$7H$_2$O 0.02%. The composition of the semi-solid fermentation medium was rice bran 45.2%, zeolite 31%, yeast powder 0.02%, corn powder 5%, dextrose 3%, lime 0.3%, NaCl 0.06%, CaCl$_2$ 0.02%, and H$_2$O 15.42%. Insecticide formulations produced in the liquid fermentation named BTK-HL106, BTI-HL63 and BS-1593 pesticides and those in the semi-solid fermentation were designated as BTK-HL106-1, BTI-HL63-1 and BS-1593-1 pesticides, respectively. The number of spore (endotoxin crystals) was 2.65${\times}$10$\^$9/ spores per $m\ell$ in the BTK-HL106 and 3.5${\times}$10$\^$10/ in the BTK-HL106-1 3.8${\times}$10$\^$9/ spores in the BTI-HL63 and 7.0${\times}$10$\^$10/ in the BTI-HL63-1, and 7.5${\times}$10$\^$9/ in the BS-1593 and 1.4${\times}$10$\^$10/ in the BS-1593-1. The spores in the BS-1593 formulation was produced two times more than the other formulations. The spores in the BTI-HL63-1 were contained twice than those in the BTK-HL106-1, and five times than those in the BS-1593-1. The results indicated that spore (endotoxin crystals) productions in the semi-solid fermentation increased about ten times than those in the liquid fermentations. $LC_{50}$s of the BTI-HL63 and BS-1593 were 4.5 $\mu\textrm{g}$, and those of the BTI-HL63-1 and BS-1593-1 were 1.5 $\mu\textrm{g}$. $LC_{50}$ of the BTK-HL106 was 1.5 mg and that of the BTK-HL106-1 was 0.9 mg. The $LC_{50}$s of the formulations in the semi-solid fermentations showed about two to three times higher than those in the liquid fermentations.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.101-108
• /
• 2018

AA7010 is an Al-Zn-Mg-Cu alloy containing Zr, developed as an alternate to traditional AA7075 alloy owing to their high strength combined with better fracture toughness. It is necessary to improve the corrosion resistance and surface properties of the alloy by incorporating plasma electrolytic oxidation (PEO) method. AA7010-T7452 aluminum alloy has been processed through the forging route with multi-stage working operations, and was coated with $10{\mu}m$ thick $Al_2O_3$ ceramic aluminina coating using the plasma electrolytic oxidation (PEO) method. The corrosion, stress corrosion cracking (SCC) and nano-mechanical behaviours were examined by means of potentiodynamic polarization, slow strain rate test (SSRT) and nano-indentation tests. The results indicated that the additional thermomechanical treatment during the forging process caused a fully recrystallized microstructure, which lead to the poor environmental cracking resistance of the alloy in 3.5% NaCl solution, despite the overaging treatment. Although the fabricated PEO coating improved general corrosion resistance, the brittle nature of the coating did not provide any improvement in SCC resistance of the alloy. However, the hardness and elastic modulus of the coating were significantly higher than the base alloy.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.182-188
• /
• 2014

Three new transition metal complexes based on Ozagrel $[Cu(Ozagrel)]_n$ (1), $[Zn(Ozagrel)(Cl)]_n$ (2), ${[Mn_2-(Ozagrel)(1,4-ndc)_2]{\cdot}(H_2O)}_n$ (3), (Ozagrel = 3-(4-((1H-imidazol-1-yl)methyl)phenyl)acrylic acid; 1,4-ndc = 1,4-Naphthalenedicarboxylic acid) have been hydrothermally synthesized and characterized by elemental analyse, IR, TG, PXRD, electrochemical analysis and single crystal X-ray diffraction. X-ray structure analysis reveals that 1 and 3 are 3D coordination polymers, while complex 2 is a two-dimensional network polymer, the 2D layers are further packed into 3D supramolecular architectures that are connected through hydrogen bonds. The electrochemistry of 1-3 was studied by cyclic voltammetry in methanol and water using a glassy carbon working electrode. Also, thermal decomposition process and powder X-ray diffraction of complexes were investigated.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1949-1954
• /
• 2012

We have developed a novel and eco-friendly synthetic route for the preparation of a two-dimensional layered zinc hydroxide with intercalated nitrate anions. The layered zinc hydroxide nitrate, called 'zinc basic salt', was, in general, successfully synthesized, using an electron beam irradiation technique. The 2-propanol solutions containing hydrated zinc nitrate were directly irradiated with an electron-beam at room temperature, under atmospheric conditions, without stabilizers or base molecules. Under electron beam irradiation, the reactive OH radicals were generated by radiolysis of water molecules in precursor metal salts. After further radiolytic processes, the hydroxyl anions might be formed by the reaction of solvated electrons and the OH radical. Finally, the $Zn_5(OH)_8(NO_3)_2{\cdot}2H_2O$ was precipitated by the reaction of zinc cation and hydroxyl anions. Structure and morphology of obtained compounds were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and high resolution transmission electron microscopy (HR-TEM). The chemical components of the products were determined by Fourier transform infrared spectroscopy (FT-IR) and elemental analysis (EA). The thermal behavior of products was studied by thermogravimetric (TG) and differential thermal analysis (DTA).

• 생명과학회지
• /
• 제9권4호
• /
• pp.439-452
• /
• 1999

This study was designed to investigate the effects of sea tangle (Laminaria japonica) extract and fucoidan components on anti-aging action. Sprague-Dawley(SD) male rats (210$\pm$5g) were fed experimental diets Dasi-Ex group: sea tangle extract powder of 4.0% added to control diet; Fuco-I, II and III groups: funcoidan powder of 1, 2 and 3% added to Dasi-Ex group for 45 days. Hydroxyl radical (.OH) formations were significantly inhibited (10-20% and 25-30%) in serum and brain mitochondria of Dasi-Ex and Fuco-I, II and III groups compared with control group. Significant differences in .OH formations of brain mitochondria in Dasi-Ex and Fuco-I groups could not be obtained, but.OH formations of brain microsomes resulted in a significant decrease (15-20%) in Fuco-II and III groups compared with control group. Basal oxygen radical (BOR) formations were significantly decreased about 10% and 13-15% in brain mitochondria of Dasi-Ex and Fuco-I group, and Fuco-II, III groups, and also decreased about 10% and 15-20% in brain microsomes of Dasi-Ex and Fuco-I groups, and Fuco-II, III groups. LPO levels of brain mitochondria and microsomes were significantly inhibited about 10% in Dasi-Ex and Fuco-I, II groups and 15% in Fuco-III groups. Oxidized proteins (>C=O) were significantly inhibited about 10% in serum of Dasi-Ex and Fuco-I, II, III groups and brain mitochondria of Dasi-Ex group, while remarkably inhibited (30~35%) in brain mitochondria of Fuco-I, II and III groups. Nitric oxide (NO) levels were significantly inhibited (12~15%) in serum of Fuco-I, II and III groups, but there no significant difference in serum NO levels of Dasi-Ex group. Superoxide dismutase (SOD) activities were remarkably increased (30~ 60%) in serum of Fuco-I, II and III groups, but there were no significant differences in SOD activities in serum of Dasi-Ex group. Catalase (CAT) activities were significantly increased about 20% in serum of Dasi-Ex and Fuco-I, II, III groups. Mn-SOD activities in brain mitochondria were significantly increased about 17% in Dasi-Ex group, while remarkably increased 26~36% in Fuco-I, II, III groups. Cu,Zn-SOD activities in brain cytosol were dose-dependently of fucoidan increased 10%, 12% and 18%, respectively, compared with control group. These results suggest that anti-aging effects of fucoidan may play a pivotal role in attenuating a various age-related changes such as chronic degenerative disease and senile dementia.

• 전기화학회지
• /
• 제12권4호
• /
• pp.342-348
• /
• 2009

아연공기이차전지는 고에너지밀도형이고 환경친화적이며 낮은 제조단가와 수용액계의 전해질 사용으로 다른 종류의 전지에 비해 매우 안전한 특성을 가진다. 하지만, 고출력 방전에 취약한 단점이 있으며 수용액에서 산소발생 및 환원반응은 매우 높은 과전압 하에서 일어나 전지효율의 감소 및 수명단축의 결과를 가져온다. 따라서 충 방전이 개시되면서 초기 OCV로부터 전압강하를 최소화 시키는 것이 성능 개선의 관건인데 이는 고성능의 촉매개발로 해결해야 한다. 본 연구에서는구연산법을 이용하여 $Pr_{1-x}(Sr,\;Ca)_x\;CoO_3$분말을 합성하고 각 분말들의 물성을 XRD, SEM, TGA 등을 이용하여 측정하고, 이를 이용한 양극의 환원 및 산화분극과 순환전압전류 등의 전기 화학적 특성을 평가하여 기존에 연구했던 $La_{1-x}Sr_xCoO_3$, $La_{1-x}CaxCoO_3$ 등의 촉매 성능보다 향상된 결과를 얻을 수있었다.

• 생명과학회지
• /
• 제10권4호
• /
• pp.340-346
• /
• 2000

This study was designed to investigate the effects of silk fibroin(Mw 500) powder (SFP) on oxygen radicals and the scavenger enzymes in brain membranes of rats. Spragu-Dawley(SD) male rats(160${\pm}$10g) were fed basic diet(control group), and experimental diets(SFP-2.5 and SFP-5.0 groups) added 2.5 and 5.0g/kg BW/day for 6 weeks. Hydroxyl radical($.$OH) levels resulted in a decreases(6.6% and 9.7%, 2.8% and 11.9%, respectively) in brain mitochondria and microsomes of SFP-2.5 and SFP-5.0 groups compared with control group, but were significantly decreased in these membrances of SFP-5.0 group only. Superoxide radical (O2) levels were a slightly decreased (2.0% and 9.1%, respectively) in brain cytosol of SFP-2.5 and SFP-5.0 groups compared with control group. Lipid peroxide(LPO) levels were significantly decreased (12.9% and 21.9%, 13.2% and 22.5%, respectively) in brain mitochondria and microsomes of SFP-2.5 and SFP-5.0 groups compared with control group. Oxidized protein (OP) levels were significantly decreased (16.7% and 15.7%, respectively) in brain microsomes of SFP-2.5 and SFP-5.0 group compared with control group, but significantly difference between in brain mitochondria of these two groups could not be obtained. Mn-SOD activities were remarkably increased (11.2% and 24.2%, respectively) in mitochodria of SFP-2.5 and SFP-5.0 groups. CuZn-SOD activities were effectively increased (7.7% and 19.6%, respectively) in brain cytosol of SFP-2.5 and SFP-5.0 groups, but significant difference between control and SFP-2.5 groups could be not obtained. GSHPx activities were considerably increased (5.3% and 11.7%, respectively) in brain cytosol of SFP-2.0 and SFP-5.0 groups compared with control group. There results suggest that anti-aging effect of silk fibroin may play an effective learning and memory role in a attenuating a oxidative stress and increasing a scavenger enzyme activity in brain membranes.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.