• Asian-Australasian Journal of Animal Sciences
• /
• 제5권2호
• /
• pp.389-395
• /
• 1992

Nutritional status of trace minerals (Se, Cu and Zn) in goats grazed on the native pasture was investigated during 2 years in Luzon Island, Republic of the Philippines. Three regions (South, Central and North) were objected to collect the samples of blood of goats and forages on the pasture. Se content of major species forages in the pasture was $24.7{\mu}g/kg$ DM, and was clearly lower than the value ($200{\mu}g/kg$ DM) required commonly for ruminant feed. The Cu and Zn contents of all forage samples ranged from 7.6 to 24.3 and 11.4 to 50.6 mg/kg DM, respectively, and these values almost exceeded the dietary level required for sheep. The blood Se levels in about 55% of goats grazed alone were under the normal range ($20{\mu}g/l$), but it in goats fed some concentrates as a supplement were almost within a normal ranges ($20-200{\mu}g/l$), though the Cu content of forages almost exceeded the dietary level required commonly. The 4-13% of plasma samples of goats without supplement showed the Zn level below the lower limit (0.6 mg/l) of normal range. The Zn deficiency was mostly improved by the addition of a small amount of concentrates. From these results, it will be necessary to study about unstable Cu status of grazed goats in Luzon Island regarding an interaction of Cu and other elements known to relate to the malabsorption of dietary Cu.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.364-372
• /
• 2003

In continuous galvanizing process, dissolution of iron into molten zinc results in a fairly great amount of dross. In order to decrease dross, the amount of dissolved iron of strip in molten zinc was investigated in the range of 0∼0.22%Al content, 440∼$470^{\circ}C$ strip temperature and 3∼60 sec dipping time. Uniform Fe-Al-Zn inhibition layer was formed in the coating layer/strip interface not only in the grain boundary but also in the grain of substrate with the increase of Al content in the zinc pot, while the amount of iron dissolution was decreased. Inhibition layer was unstable as the dipping time and strip temperature increased and the amount of iron dissolution increased.

• 통합자연과학논문집
• /
• 제6권2호
• /
• pp.76-81
• /
• 2013

ZnO nanoparticles and vinyl pyridine were added to the mixture of MMA (methyl methacrylate), HEMA (2-hydroxy ethyl methacrylate) and NVP (N-vinylpyrrolidone) in a mould at various concentrations. Cross-linker EGDMA (ethyleneglycoldimethacrylate) and AIBN (azobisisobutyronitrile) initiator were finally added to the mixture and then heated at $80^{\circ}C$ for 60 min to prepare high-performance hydrogel ophthalmic lens. The physical properties of the hydrogel ophthalmic material were investigated by measuring the average value of refractive index, water content and optical transmittance. The refractive index of 1.429~1.450, water content of 34~41%, and visible transmittance of 78~90% were obtained. The material is possibly used to manufacture UV-block hydrogel contact lens.

• Current Photovoltaic Research
• /
• 제3권2호
• /
• pp.54-60
• /
• 2015

ZnSnO thin films were deposited by atomic layer deposition (ALD) process using diethyl zinc ($Zn(C_2H_5)_2$) and tetrakis (dimethylamino) tin ($Sn(C_2H_6N)_4$) as metal precursors and water vapor as a reactant. ALD process has several advantages over other deposition methods such as precise thickness control, good conformality, and good uniformity for large area. The composition of ZnSnO thin films was controlled by varying the ratio of ZnO and $SnO_2$ ALD cycles. The ALD ZnSnO film was an amorphous state. The band gap of ZnSnO thin films increased as the Sn content increased. The CIGS solar cell using ZnSnO buffer layer showed about 18% energy conversion efficiency. With such a high efficiency with the ALD ZnSnO buffer and no light soaking effect, AlD ZnSnO buffer mighty be a good candidate to replace Zn(S,O) buffer in CIGSsolar cells.

• 한국주조공학회지
• /
• 제34권3호
• /
• pp.100-106
• /
• 2014

In recent years, Mg and its alloys have attracted a great deal of attention due to their low density, relatively excellent castability, and straightforward recyclability. Mg alloys have been widely applied to various industrial fields, and are representatively used in automotive and electronic parts. According to previous researches, the electrical conductivity of Mg alloys greatly decreases with increasing Al content. However, with the addition of Zn and/or Cu, the electrical conductivity of Mg alloys is maintained or slightly increased, and improved mechanical properties are obtained as well. On this basis, Mg-Zn-Cu alloys have been investigated in the present study with a focus on the effect of adding Zn and Cu on the electrical conductivity. The Zn and Cu contents ranged from 4 to 6wt.% and 0 to 1.5wt.%, respectively. Ternary Mg-Zn-Cu alloys have been prepared by gravity casting in a steel mold. In the as-casting condition, the electrical conductivity of Mg-Zn-Cu alloys showed a linear increasing trend with decreasing Zn and increasing Cu contents. Furthermore, impact values of Zn = -1.5 and Cu = 2.5 were determined for these alloys by electrical conductivity tests.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2821-2827
• /
• 2024

This investigation developed a novel polyester composite based on the addition of zinc oxide (ZnO) of different sizes. We prepared nine samples Containing different percentages and sizes of ZnO as well as the control sample (Pol-ZnO0). The attenuation factors of Pol-micro ZnO were estimated using Phy-x software, while the HPGe detector and various gamma sources were used to experimentally measure the all-prepared composites. In terms of the two methods for micro composites, good agreement was observed. The linear attenuation coefficient (LAC) of Pol-ZnO20, Pol-ZnO40, and Pol-ZnO60, two more samples one with ZnO nanoparticles instead of microparticles, and the other with half microparticles and half nanoparticles (referenced as 0.5 M + 0.5 N) were determined. For all the Polyester composites and energies, the mixture of microparticles and nanoparticles had greater LAC values than each of the particles on their own. For example, the LAC values for the Pol-ZnO20 polymer at 1.330 MeV are 0.0836, 0.0888, and 0.0903 cm^-1 for the microparticles, nanoparticles, and mixture, respectively. The values of the prepared polymer samples' radiation protection efficiency (RPE) against energy with a thickness of 2 cm was determined experimentally. The Pol-ZnO60 0.5 M + 0.5 N sample has the highest RPE out of all the samples, followed by its nanoparticle counterpart, and then its microparticle counterpart. On the other hand, the Pol-ZnO0 sample, the polymer with no ZnO content, at all energies has the lowest RPE, followed by the three Pol-ZnO20 samples.

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.664-670
• /
• 2002

The electrical characteristics of $ZnO-Pr_6O_{11}-CoO-Cr_2O_3-Y_2O_3$(ZPCCY)-based varistors were investigated with $Y_2O_3$ content in the range of 0.0~4.0 mol%. As $Y_2O_3$ content is increased, the average grain size was markedly decreased in the range of 18.6~3.2 $\mu m$ and the density of the ceramic was decreased in the range of 5.53 ~3.74 $g/\textrm{cm}^3$. While, the varistor voltage was increased in the range of 39.4~748.1 V/mm and the nonlinear exponent was in the range of 4.5~51.2 with increasing $Y_2O_3$ content. The addition of $Y_2O_3$ greatly enhanced the nonlinear properties of varistors, compared with the varistor without $Y_2O_3$. In particular, the varistors with $Y_2O_3$content of 0.5 mol% exhibited the highest nonlinearity, in which the nonlinear exponent is 51.2 and the leakage current is 1.3 $\mu A$. The donor concentration and the density of interface states were decreased in the range of (4.19~0.14) $\times$10$^{18}$ /㎤ and (5.38~1.15)${\times}10^{18}/\textrm{cm}^3$, respectively, with increasing $Y_2O_3$ content.

• 한국수산과학회지
• /
• 제41권5호
• /
• pp.315-323
• /
• 2008

To measure the mineral content of fishes, we collected 177 individuals from 53 fish species from the east (Pohang), west (Gunsan), and south (Tongyeong) coasts of Korea. The mean content of the macro mineral in a 100 g sample taken from the edible portion of each fish was (in descending order): P(207.4 mg), K(169.7 mg), Na(101.6 mg), Ca(44.4 mg), and Mg(30.4 mg). In comparison, the mean content of micro mineral in the fishes was (in descending order): Zn ($8.98{\mu}g/g$), Fe ($5.03{\mu}g/g$), Cu ($0.76{\mu}g/g$), Mn ($0.43{\mu}g/g$), and Ni ($0.08{\mu}g/g$). We could not observe clear regional variation in the mineral content of fish species. With regard to minerals considered essential for humans, the amount of Ca per sample (100 g) was the highest in the Scyliorhinus torazame (465.4 mg), and than followed by Ammodytes personatus (338.0 mg), Dasyatis akajei (267.4 mg), Raja kenojei (248.1 mg), Conger myriaster (174.1 mg), Clupanodon punctatus (86.8 mg), Muraenesox cinereus (81.2 mg), and Engraulis japonica (70.4 mg). The daily average intake of the mineral through the fishes consisted of P (100.6 mg), K (82.3 mg), Na (49.3 mg), Mg (14.8 mg), Zn (0.44 mg), Fe (0.24 mg), Cu (0.04 mg) and Mn (0.02 mg). The respective intakes of macro mineral (P, Mg, Na, Ca, K) from the fishes were about 14.4, 4.2, 3.3, 3.1 and 1.8% of the dietary reference intakes for Koreans (KDRIs) set by the Korean Nutrition Society. In comparison, the respective intakes of micro mineral (Cu, Zn, Fe, Mn) from the fishes were about 4.6, 4.4, 2.4, and 0.6% of the KDRIs.

• 생명과학회지
• /
• 제14권5호
• /
• pp.727-731
• /
• 2004

동충하초 자실체 열수추출물과 균사체 중의 성분물질을 규명하고자 일반성분, 무기 질, 유리 아미노산, 비타민 등을 분석 검토한 결과는 다음과 같았다. 자실체 열수추출물의 수분 함량은 95.24%, 탄수화물이 3.10%, 조단백질 1.05%, 회분 0.45%,조지방 0.16%이었으며 균사체 중에 탄수화물 54.70%, 조단백질 20.54%, 조지방 14.01%, 회분 7.03%, 수분이 3.72% 함유되어 있다. 또한 무기질을 분석한 결과 자실체 열수추출물 1.36 g/100 ml 중에 K이 79.09 mg/100 g으로 가장 많았었고 Ca, p, Mg, Na, Mn, Zn, Cu의 순으로 함유되어 있으며 균사체 0.50 g/100 ml 중에 K, p, Mg, Ca, Na, Fe, Mn, Zn Cu의 순으로 미네랄이 함유되어 있었다. 자실체 열수추출물과 균사체 중에서 각각 21종과 22종의 유리아미노산이 측정되었고 9종의 인체 필수아미노산을 모두 함유하고 있었으며 유리아미노산의 총함량과 필수아미노산의 함량은 각각 223.78 mg/100 ml, 48.32 mg/100 ml와 147.40 mg/100 ml, 69.80 mg/100 ml이었다. 비타민을 분석한 결과 총 10종의 비타민이 측정되었고 균사체 중의 비타민 총함량은 221.23 mg/100 g으로 자실체 열수추출물중의 비타민 총함량 13.88 ing/100 g보다 무려 16배 더 많이 함유되었다.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.13-17
• /
• 2003

본 연구에서는 $ZnWO_4-LiF$계를 이용하여 RF모듈 구현을 위한 새로운 조성의 LTCC 소재를 개발하고자 하였다. 순수 $ZnWO_4$의 경우 98% 이상의 상대밀도를 얻기 위해서는 $1050^{\circ}C$이상의 소결온도가 필요하였고 소결체의 고주파유전특성은 유전율($\epsilon_r$) 15.5, 품질계수($Q{\times}f0$) 74000 GHz, 공진주파수 온도계수$(\tau_f)-70ppm/^{\circ}C$이었다. $ZnWO_4$에 LiF의 첨가는 상호 반응에 의해 $810^{\circ}C$ 부근에서 액상을 형성하였고 따라서 0.5에서 1.5 wt%의 LiF의 첨가로 $ZnWO_4$를 $820^{\circ}C$에서 치밀화를 얻을 수 있었다. 주어진 LiF의 첨가범위에서 소결 수축률은 LiF 량의 증가와 함께 증가하였다. LiF의 첨가는 LiF 자체의 낮은 유전율에 의해 유전율을 15.5에서 14.2∼15의 범위로 감소시켰으며 품질계수($Q{\times}f0$)도 LiF와 $ZnWO_4$의 반응 및 미세구조의 불균일화로 LiF의 첨가량의 증가와 함께 낮아지는 경향을 보였다.