• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.710-714
• /
• 2009

In this study, we analyzed the desulfurization performance of Zn-based dry sorbents according to the reducing power, water vapor content and $H_2S$ inlet concentration of coal gas in a batch-type fluidized-bed reactor. We used three different coal gas composition with different reducing power such as KRW air-blown coal gas, Shell oxygenblown coal gas and IAE coal gas. The experiments were performed by changing the inlet concentration of water vapor and $H_2S$ in a coal gas. Water vapor content was varied from 5% to 30% and $H_2S$ inlet concentration from 0.5% to 2.0%. As both the water vapor content and $H_2S$ inlet concentration increased, desulfurization performance of Zn-based sorbents decreased regardless of the reducing power of the coal gas. The minimum desuflurization performance was, however, above 99.5% for all experimental conditions, which implied that Zn-based dry sorbents could be used to remove $H_2S$ up to 99%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.159-159
• /
• 2017

Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements are known to play an important role in the bone formation and also affect bone mineral characteristics. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing TiO2(Zn-TiO2)coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, effect of Zn content on the corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation were studied by SEM, EDS, XRD, AC impedance, and potentiodynamic polarization test. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67 mV/s and potential range from -1500 mV to +2000 mV. Also, AC impedance was performed at frequencies ranging from 10 MHz to 100 kHz for corrosion resistance.

• Journal of the Korean Ceramic Society
• /
• v.33 no.2
• /
• pp.149-154
• /
• 1996

ZnO and Al-doped ZnO thin films were prepared by sol-gel dip-coating method and electrical and optical properties of films were investigated. Using the zinc acetate dihydrate and acetylaceton(AcAc) as a chelating agent stable ZnO sol was synthesized with HCl catalyst. Adding aluminium chloride to the ZnO sol Al-doped ZnO sol could be also synthesized. As Al contents increase the crystallinity of ZnO thin film was retarded by increased compressive stress in the film resulted from the difference of ionic radius between Zn2+ and Al3+ The thickness of ZnO and Al-doped ZnO thin film was in the range of 2100~2350$\AA$. The resistivity of ZnO thin films was measured by Van der Pauw method. ZnO and Al-doped ZnO thin films with annealing temperature and Al content had the resistivity of 0.78~1.65$\Omega$cm and ZnO and Al-doped ZnO thin film post-annealed at 40$0^{\circ}C$ in vacuum(5$\times$10-5 torr) showed the resistivity of 2.28$\times$10-2$\Omega$cm. And the trans-mittance of ZnO and Al-doped ZnO thin film is in the range of 91-97% in visible range.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.575-580
• /
• 2012

The purpose of this study is to investigate the crystalline structure and optical properties of (GaZn)(NO) powders prepared by solid-state reaction between GaOOH and ZnO mixture under $NH_3$ gas flow. While ammoniation of the GaOOH and ZnO mixture successfully produces the single phase of (GaZn)(NO) solid solution within a GaOOH rich composition of under 50 mol% of ZnO content, this process also produces a powder with coexisting (GaZn)(NO) and ZnO in a ZnO rich composition over 50 mol%. The GaOOH in the starting material was phase-transformed to ${\alpha}$-, ${\beta}-Ga_2O_3$ in the $NH_3$ environment; it was then reacted with ZnO to produce $ZnGa_2O_4$. Finally, the exchange reaction between nitrogen and oxygen atoms at the $ZnGa_2O_4$ powder surface forms a (GaZn)(NO) solid solution. Photoluminescence spectra from the (GaZn)(NO) solid solution consisted of oxygen-related red-emission bands and yellow-, green- and blue-emission bands from the Zn acceptor energy levels in the energy bandgap of the (GaZn)(NO) solid solutions.

• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.143-159
• /
• 1990

There is clear difference in content of the major and trace elements between Masan granites of Cu province and Yucheon-Eonyang granites of Pb-Zn province in the Yucheon Basin: the former has low content in K(2.08%), Na(2.42%) and Rb (127ppm), and high content in Ca(3.75%), Mg(1.42%) and Sr(304ppm) whereas the latter has high content in K(3.56-3.60%), Na(3.05-3.06%) and Rb(144-161ppm), and low content in Ca(0.62-0.96), Mg(0.21-0.26%) and Sr(136-157ppm). Ore metals in granites also show slight difference between two areas: Masan granites have slightly higher Cu content(18ppm) than Yucheon-Eonyang granites(13, 14ppm), whereas Yucheon granite(29ppm) has slightly higher Pb content than Masan granites(25ppm). Thus, it may be possible to apply geochemical difference of the granites to distinguish whether a Cretaceous granite mass is related to copper or lead-zinc mineralization, and whether it belongs Cu-province or Pb-Zn province in the Yucheon Basin.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.463-469
• /
• 2016

In this research, a new expectation in enhancing the PES (polyethersulfone) polymer phase inversion membrane performances with nanoparticles is proposed by using ZnO. This paper investigated the synthesis of PES phase inversion membranes including ZnO nanoparticles and evaluates the performance of these mixed matrix membranes. The PES-ZnO mixed matrix membranes were fabricated by phase inversion method using the PES-ZnO-NMP(N-methyl-1-pyrrolidone) casting solutions with low ZnO nanoparticles content of 0.375 wt%. The influence of ZnO nanoparticles on the characteristics of PES-ZnO mixed matrix membranes was investigated with scanning electron microscope observations of membrane cross-sections, contact angle measurements, tensile strength measurements, pure water flux measurements and ultrafiltration experiments of BSA solution. Those results showed that the performance advancements in comparison with the pure PES membrane without ZnO in terms of increasing hydrophilicity as well as reducing membrane fouling by adding ZnO nanoparticles even in low concentration.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.142-142
• /
• 2005

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.3
• /
• pp.126-133
• /
• 2015

The aim of this study is to investigate the effect of solution treatment on the corrosion behavior of Mg-8%Al-(0-1)%Zn casting alloys in 1M NaCl aqueous solution. After the solution treatment, all alloys showed single ${\alpha}$-(Mg) phase microstructure by dissolution of ${\beta}(Mg_{17}Al_{12})$ phase into the ${\alpha}$-(Mg) matrix. The $H_2$ evolution volume decreased with an increase in Zn content, which indicates that the addition of Zn plays a beneficial role in decreasing corrosion rate of the Mg-Al-Zn alloy in solution-treated state. The microstructural evaluations on the corrosion products and corroded surfaces after the immersion test in 1 M NaCl solution revealed that the incorporation of more $Al_2O_3$ and ZnO into the corrosion product, by which the penetration of $Cl^-$ ions is impeded, are thought to be responsible for the better corrosion resistance in relation with the Zn addition.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.114-121
• /
• 1994

A $Ba_{2}Co_{2-x}Zn_{x}Fe_{12}O_{22}(x\;=\;0.0~2.0,\;Co_{2-x}Zn_{x}Y)$ powder was prepared by a oxidation--coprecipitation method and sintered at $1150~1250^{\circ}C$ for 4 hours. The microstructures and magnetic properties(saturation magnetization, Curie temperature), complex permeability of sintered body were measured As increasing Zn content from x = 0 to 2.0 in $Co_{2-x}Zn_{x}Y$, the real value of complex permeased from 7 GHz to 1 GHz. Because of resonance in few GHz range, Y-type hexagonal ferrite is rmre applicalble than spinel ferrite in high frequency range, and more research would be necessary to find the mechanism of the second resonance observed in higher frequency.

• Environmental Analysis Health and Toxicology
• /
• v.4 no.1_2
• /
• pp.35-45
• /
• 1989

Studies on the heavy metal content of ginkgo leaves growing in all around Seoul. This study was carried out to investigate the concentration of heavy metals and soluble sulfur in ginkgo leaves. These leaves are found growing in park, residential, commercial and industrial areas all around Seoul. These analyzed the quantity of Cd, Co, Cu, Fe, Mn, Ni, Pb, Zn, Hg and soluble surfur in separate samples of washed and unwashed leaves. The results were as follows: 1. This order of heavey metal concentration was found in Seoul area,: Fe＞Mn＞Zn＞Ni＞Pb＞Cu＞Co＞Cd＞Hg. 2. Pb concentration was higher in the commercial area than in the other areas, and it concentration in washed leaves was higher 96～100% and unwashed leaves 85～170%. 3. In the residential area Ni concentration was significantly higer where about seven times more Ni as found on the top part of the leaves. 4. Water soluble surfur was higest in the inudstrial area, but the percentage on top of the leaves was only 0.04～0.05% simillar with other area. 5. Fe, Zn and Ni were almost positively correlated to each component but negatively correlated between Mn and souble sulfer. All of content except Mn and Ni were significance between each area in washed and unwashed leaves.