• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1734-1740
• /
• 2001

Feeding trials using weanling pigs and broiler chicks were conducted to evaluate the efficacy of different metal-amino acid chelates and complexes at various levels of copper and zinc on the performance and fecal excretions. A total of 200 weanling pigs (Large White ${\times}$ Yorkshire ${\times}$ Duroc, $11.20{\pm}0.81kg$) were randomly assigned to 5 dietary treatments following a randomized complete block design. Each treatment was replicated 4 times with 10 pigs per pen. The dietary treatments were designated as : A-diet containing 170 ppm Cu from $CuSO_4$ and 120 ppm Zn from $ZnSO_4$, B-diet containing 85 ppm Cu from Cu-amino acid chelate (CAC) and 60 ppm Zn from Zn-amino acid chelate (ZAC), C-diet containing 170 ppm Cu from CAC and 120 ppm Zn from ZAC, D-diet containing 85 ppm Cu from Cu-lysine complex (CL) and 60 ppm Zn from Zn-methionine complex (ZM), and E-diet containing 170 ppm Cu from CL and 120 ppm Zn from ZM. On the other trial, 144 of one day old broiler chicks were randomly distributed to 6 dietary treatments following a completely randomized design. Each treatment was replicated 3 times with 8 chicks per replicate. The dietary treatments were as follows: 1-diet with 60 ppm Cu from $CuSO_4$ and 40 ppm Zn from $ZnSO_4$, 2-diet with 120 ppm Cu from $CuSO_4$ and 80 ppm Zn from $ZnSO_4$, 3-diet with 60 ppm Cu from CAC and 40 ppm Zn from ZAC, 4-diet with 120 ppm Cu from CAC and 80 ppm Zn from ZAC, 5-diet with 60 ppm Cu from CL and 40 ppm Zn from ZM, and 6-diet with 120 ppm Cu from CL and 80 ppm Zn from ZM. In Exp. 1 with pigs, there was no difference on average daily gain and average daily feed intake observed among treatments. There was improvement (p<0.05) on the overall feed conversion ratio (FCR) of pigs fed diet containing 120 ppm Zn and 170 ppm Cu from metal-amino acid chelates relative to those fed diet containing inorganic sources of Cu and Zn but equally efficient as those fed diet containing metal-amino acid complexes. Pigs fed diet containing either metal-amino acid chelates or complexes as sources of Cu and Zn had higher (p<0.05) Cu and Zn concentration in serum and lower (p<0.05) in feces than those receiving diet with inorganic sources. In Exp. 2 with broiler chicks, the overall FCR was not different among treatments. Higher (p<0.05) Cu and Zn concentration in serum was obtained from birds fed diet with 60 ppm Cu and 40 ppm Zn from metal-amino acid chelates compared to those fed diet with inorganic sources of Cu and Zn. Also, the feces collected from birds fed diet with either metal-amino acid chelates or complexes contained generally lower Cu and Zn than those birds fed diet with inorganic sources. The higher the dietary level of Cu and Zn the higher the Cu and Zn concentration in the feces. Based on the results, both metal-amino acid chelates and complexes of Cu and Zn at low levels (Zn 60 ppm, Cu 85 ppm for weanling pigs and Zn 40 ppm, Cu 60 ppm for broiler chicks) are not different from that of high levels of inorganic sources in maintaining growth performance and serum concentration. The fecal excretions for Cu and Zn were greatly reduced when organic sources were used.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.11-23
• /
• 1986

Soils and rice plants in wastewater irrigated area of the Mangyeong River receiving waster from the Jeonju Industrial Complex and municipal sewage were sampled at two depths to assess the nature and content of Cd, Cu, Pb and Zn, particularly with respect to distance from wastewater source. For metal levels of soils in these area, no difference in the heavy metal contents between the surface and the subsurface soils was found. Total contents of Cu, Pb and Zn in soils were negatively correlated with distance from the source. A positive correlation was found between contents of total and 0.1N-HCl extractable or $1N-CH_3COONH_4$ extractable heavy metals in surface soils of these area. Total contents of heavy metals in soils were positively correlated with clay, soil organic matter and cation exchange capacity. Heavy metal contents of brown rice sampled at the Jeon-ju Industrial Complex area ranged from 0.15 to 0.91 ppm for Cd, from 1.13 to 5.68 ppm for Cu, from 0.22 to 7.16 ppm for Pb and from 11.74 to 38.66 ppm for Zn. Negative correlation was found between the contents of Cd, Cu, Pb, and Zn in the brown rice and the distance from the source. The contents of Cd, Cu and Zn in rice straw were positively correlated with those in the brown rice.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.250-258
• /
• 1999

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 2nd Industrial Complex that has started since 1995. Soils sampled in 0-3 cm and 3-6 cm soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. The content of Cd in soil layer of 0 to 3 cm was 0.07-4.37ppm range, average concentration was 0.516ppm and 3-6 cm was 0.07-8.52ppm range, average concentration was 0.380ppm. Area of the chemicals, dyes and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Cu in soil layer of 0 to 3 cm was 0.61-42.62ppm range, average concentration was 11.087ppm and 3-6 cm was 0.16-35.45ppm range, average concentration was 7.578ppm. Area of the metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Ni in soil layer of 0 to 3 cm was 0.19-15.93ppm range, average concentration was 5.525ppm and 3-6 cm was 0.39-15.59ppm range, average concentration was 5.310ppm. Area of the metal and chemical products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Pb in soil layer of 0 to 3 cm was 3.10-55.75ppm range, average concentration was 23.543ppm and 3-6 cm was 3.35-46.55ppm range, average concentration was 19.198ppm. Area of the chemicals and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. The content of Zn in soil layer of 0 to 3 cm was 26.50-943.00ppm range, average concentration was 158.329ppm and 3-6 cm was 35.45-882.45ppm range, average concentration was 127.914ppm. Area of the chemicals and metal products manufacturing were higher than the other manufacturing area in Industrial Complex. As the result, this study was to compare Cd, Cu, Ni, Pb, Zn average concentration in uncontaminated soil of world with those in soil, that Cu, Ni were uncontaminated concentration level, Cd was somewhat higher compare with the concentration level of world, Pb and Zn were very higher. Soil contaminated degree of Iksan 2nd Industrial Complex was known a difference by type of industrial activities(chemical, dyes and metal of products)

• The Korean Journal of Pesticide Science
• /
• v.4 no.1
• /
• pp.32-37
• /
• 2000

A series of transition metal complexes of 3,6-bis(6'-methyl-2'-pyridyl)pyridazine ($L^{1}$) and 3,6-bis(2'-pyridyl)pyridazine ($L^{2}$) as artificial nuclease, $1{\sim}8$ were synthesized. After determining of X-ray crystal structure, hydrolysis rate constants of phosphates, as DNA model compound and biological activities were confirmed. $L^{2}$-Zn(II) complex, 8 was shown the best hydrolysis rate constant. The $L^{2}$-Ni(II) complex, 5 and $L^{2}$-Co(II) complex, 6 showed the highest herbicidal activity against SCP (Scriptus Juncoids) with excellent tolerance to rice, ORY (Oryzae sativa L.). And the $L^{1}$-Co(II) complex, 2, $L^{1}$-Zn(II) complex, 4 and ligand ($L^{1}$ amp; $L^{2}$) displayed above 90% fungicidal activity against MAG (Magnaporthe grisea).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.178-178
• /
• 2008

ZnO 바리스터는 인가되는 전압에 따라 저항이 변하는 전압 의존형 저항체이며 각종 전기 전자 정보통신용 제품에 정전기(ESD) 대책용 소자로 폭 넓게 사용되는 전자 세라믹스 부품이다. 특별히 Bi-based ZnO 바리스터는 다양한 상(phase)으로 구성되어 있으며 그 입계의 전기적 특성은 소량 첨가되는 dopant의 종류에 따라 다양하게 변하는 것으로 알려져 있다. 본 연구에서는 Bi-based ZnO 바리스터 (ZnO-$Bi_2O_3$, ZnO-$Bi_2O_3-Mn_3O_4$)에서 각종 유전함수$(Z^*,M^*,\varepsilon^*,Y^*,tan{\delta})$를 이용하여 입계의 주파수-온도에 대한 특성을 살펴 보았다. 일반적인 ZnO 바리스터 제조법으로 시편을 제작하여 78K~800K 온도 범위에서 각종 유전함수를 이용하여 복소 평면도(complex plane plot)와 주파수 응답도(frequency explicit plot)의 방법으로 defect level과 입계 특성(활성화 에너지, 정전용량, 저항, 입계 안정성 등)에 대하여 고찰하였다. ZnO-$Bi_2O_3$(ZB)계와 ZnO-$Bi_2O_3-Mn_3O_4$(ZBM)계 모두 상온 이하의 온도에서 $Zn_i$와 $V_o$의 결함이 나타났으며, 이들의 결함 준위는 각 유전함수에 따라 다소 차이가 났다. 입계 특성으로 ZB계는 이상구간(560~660K)을 전후로 1.15 eV $\rightarrow$ 1.49 eV의 활성화 에너지의 변화가 나타났지만, ZBM계는 이러한 현상이 나타나지 않았다. 또한 입계 전위 장벽의 온도 안정성에 대해서는 Cole-Cole model을 적용하여 분포 파라미터 (distribution parameter; $\alpha$)를 구하여 고찰하였다. ZB계의 입계 안정성은 온도에 따라 불안정해 졌지만, ZBM계는 안정하였다.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.232-238
• /
• 1990

To study the biological roles of Zn, we investigated simple model systems of $Zn^{++}, coordinated with OH_2 or NH_3,$ or with O=C- in peptide. The geometrical structures and net atomic charges were calculated by the ab initio HF-SCF theory using double zeta basis sets. The ligands of O-H, N-H, and O=C- are very polar due to $Zn^{++}$. Therefore, the carbon atom in peptide becomes so electrophilic that it can be easily attacked by other nucleophiles. In addition, to understand how $Zn^{++}$ is coordinated with ligands in enzyme, a molecular mechanics method is applied to the system of the enzyme of carboxypeptidase A (CPA) with the substrate of glycyltyrosine. From our results, it appears that the Zn ion is coordinated not only by four ligands in enzyme and substrate but also by one water molecule.

• Preventive Nutrition and Food Science
• /
• v.8 no.4
• /
• pp.390-394
• /
• 2003

In the post-genome period, the technique for identifying gene expression has been progressed to high throughput screening. In the field of molecular nutrition, the use of screening techniques to clarify molecular function of specific nutrients would be very advantageous. In this study, we have evaluated Zn-regulated gene expression in Zn-deficient, homocystein-treated EA.hy926 cells, using cDNA microarray, which can be used to screen the expression of many genes simultaneously. The information obtained can be used for preliminary assessment of molecular and signaling events modulated by Zn under pro-atherogenic conditions. EA.hy926 cells derived from human umbilical vein endothelial cells were cultured in Zn-adequate (control, 15 $\mu$M Zn) or Zn-deficient (experimental, 0 $\mu$M Zn) Dulbecco's MEM media under high homocysteine level (100 $\mu$M) for 3 days of post-confluency. Cells were harvested and RNA was extracted. Total RNA was reverse-transcribed and the synthesized cDNA was labeled with Cy3 or Cy5. Fluorescent labeled cDNA probe was applied to microarray slides for hybridization, and the slide was then scanned using a fluorescence scanner. The expression of seven genes was found to be significantly decreased, and one significantly increased, in response to treatment of EA.hy926 cells with Zn-deficient medium, compared with Zn-supplemented medium. The upregulated genes were oncogenes and tumor suppressor genes, cell cycle-related genes and transporter genes. The down-regulated gene was RelB, a component of the NF-kappaB complex of transcription factors. The results of this study imply the effectiveness of cDNA microarray for expression profiling of a singly nutrient deficiency, namely Zn. Furthur study, using tailored-cDNA array and vascular endothelial cell lines, would be beneficial to clarify the molecular function of Zn in atherosclerosis, more in detail.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.53-54
• /
• 2006

Arsenic doped p-type ZnO thin films have been realized on intrinsic (100) GaAs substrate by RF magnetron sputtering and thermal annealing treatment. p-Type ZnO exhibits the hole concentration of $9.684{\times}10^{19}cm^3$, resistivity of $2.54{\times}10^{-3}{\Omega}cm$, and mobility of $25.37\;cm^2/Vs$. Photoluminescence (PL) spectra of As doped p-type ZnO thin films reveal neutral acceptor bound exciton ($A^{0}X$) of 3.3437 eV and a transition between free electrons and acceptor levels (FA) of 3.2924 eV. Calculated acceptor binding energy ($E_A$) is about 0.1455 eV. Thermal activation and doping mechanism of this film have been suggested by using X-ray photoelectron spectroscopy (XPS). p-Type formation mechanism of As doped ZnO thin film is more related to the complex model, namely, $As_{Zn}-2V_{Zn}$, in which the As substitutes on the Zn site, rather than simple model, Aso, in which the As substitutes on the O site. ZnO-based p-n junction was fabricated by the deposition of an undoped n-type ZnO layer on an As doped p-type ZnO layer.

• Fire Science and Engineering
• /
• v.10 no.4
• /
• pp.3-12
• /
• 1996

The aim of the present study is to find out the effect of cooling rate on the electrical behavior of ZnO varistors. The microstructure, 1-V characteristics and complex impedance spectra were investigated under the change of cooling rates. It is found that at cooling rate $200^{\circ}$/h, nonlinearity and breakdown voltage reached a maximum value which may show that good intergranular layer is formed as a results of proper cooling rate. Complex Impedance spectras were measured as a function of frequency range 100Hz to 13MHz to determine grain and grainboundary resistance. The semicircles were attributed to the dependence of grain and grainboundary resistance on cooling rates.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.14-20
• /
• 2001

The structure, shape, size, and magnetic properties of Ni$_{0.5}$Cu$_{0.1}$Zn$_{0.4}$Fe$_2$O$_4$ have been investigated as a function of annealing temperatures. In order to control the microwave absorbing properties of ferrite-rubber composite and the complex losses (magnetic loss and conduction loss), the effect of carbon addition was also studied. It was found that the coercive force decreased with increasing heat-treatment temperatures. Relative complex permeability and reflection loss were measured by the network analyzer. As a result, the natural resonance occurred in the low frequency tinge, and the matching frequency of the ferrite-rubber composite prepared at 130$0^{\circ}C$ was found to be lower. As heat-treatment temperatures were increased, the magnetic loss ($\mu$$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.