• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.111-117
• /
• 2004

고순도 3Y-TZP에 알루미나를 0.3∼l.2wt%까지 첨가하여 attrition milling을 하고 slip-casting하여 시료를 제조하였다. 1390∼151$0^{\circ}C$까지 열처리하여 소결체의 소결특성을 기제적 물성과 미세구조 분석을 통하여 확인하였다. XRD를 이용하여 monoclinic-ZrO$_2$의 생성량을 정량적으로 확인하였으며, 147$0^{\circ}C$ 이장에서 열처리한 시료의 경우 m-ZrO$_2$의 생성으로 밀도의 저하를 보였으며, 비정상 입자성장을 유발하여 경도가 저하되었다. 알루미나의 첨가량이 0.9wt% 미만, 열처리 온도143$0^{\circ}C$에서 microhardness가 1360Hv 이상의 소결체를 제조할 수 있었다.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.119-130
• /
• 2007

Purpose: This investigation was designed to estimate the flexure strength, density, and microstructure of the colored and uncolored zirconia oxide ceramics for fixed partial denture. Material and Methods: LAVATM All Ceramic(3M-ESPE, USA), Cercon Smart Ceramic(Dentsply, USA), and Z-match Ceramic(DentAim, Korea) were used for this study. All specimen was fabricated by ASTM C1161. After preparing $25{\times}2{\times}1.5mm$ of rectangular column and sitting rectangular column on universal test machine (UTM), external supporting point distance is 20.0 mm, internal supporting point distance is 10.0 mm. Specimen was loaded with 0.2 mm/min of cross head speed until fracture and at the time of broken of specimen, measuring loading value with PC software. Results: The results were obtained as follows: 1. Flexure strength of uncolored zirconia was higher than that of colored zirconia. 2. In uncolored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics, and it showed statistical difference between LAVATM Ceramic and Cercon Smart Ceramic (P<0.05). 3. In colored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics too, but they did not show statistical difference (p>0.05). 4. In Weibull analysis, Characterastic strength was showed highest value to uncolored LAVATM Ceramic and lowest value to Z-match ceramic, and Weibull modulus(m) of uncolored zirconia was higher than that of colored zirconia. 5. In XRD analysis, all group except Z-match showed high peak of t-ZrO2 but they did not show m-ZrO2. Colored zirconia group showed lower peak of t-ZrO2 than that of uncolored zirconia group.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.655-660
• /
• 1989

The physical properties and sinterabilities of ZrO2-Y2O3-Bi2O3 ternary system powder prepared by coprecipitation were investigated. The crystallization temperatures of ternary system were increased and the specific surface areas were decreased with increasing Bi2O3 amount as sintering agents both PSZ and FSZ. Especially, the partially stabilized zirconia showed monoclinic phase. The sinterability was increased with the amount of Bi2O3 added which caused liquid phase sintering.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.719-728
• /
• 1992

ZrO2/Al2O3-Mullite composites were prepared by infiltration of the silica sol to the porous ZrO2/Al2O3 bodies. The porous ZrO2/Al2O3 bodies for infiltration were fabricated using ZrO2 (20wt%)/Al2O3 composite powders synthesized by the emulsion-hot kerosene drying method. The preparation of silica sols was conducted by the hydrolysis-peptization of an alcoholic TEOS solution. When ZrO2/Al2O3-Mullite and ZrO2/Al2O3 composites were sintered at 1$650^{\circ}C$ for 4 hrs, both of them showed an excellent sinterability. As the amount of mullite added in the composites increased, the ratio of the tetragonal phase of zirconia to the monoclinic phase at the room temperature became higher. It was known that values of the fracture toughness of the ZrO2/Al2O3-Mullite composites were about 5.48 MPa.m1/2 much larger than that of the ZrO2/Al2O3 system.

• 대한전자공학회논문지TE
• /
• 제39권1호
• /
• pp.1-8
• /
• 2002

단사정 ZrO/sub 2/(ZrO2(m)) 또는 Y/sub 2/O/sub 3/를 5.35wt% 첨가한 정방정 ZrO2(ZrO/sub 2/(t))를 A1/sub 2/O/sub 3/에 첨가하여 물리적 및 전기전도도의 영향을 연구하였다. ZrO/sub 2/(m)과 ZrO/sub 2/(t)의 첨가는 A1/sub 2/O/sub 3/의 소결밀도를 증가 시켰다. ZrO2(t)의 첨가함에 따라 비커스 경도 또한 증가했으며, 그 량이 20wt%에서 최대가 되었다. 시편의 경도는 소결밀도에 의존함을 알 수 있었다. A1/sub 2/O/sub 3/-ZrO/sub 2/계의 경도는 ZrO/sub 2/(t)의 첨가에 의해 개선 되었고, ZrO/sub 2/(m)의 첨가가 ZrO/sub 2/(t)의 첨가보다 A1/sub 2/O/sub 3/-ZrO/sub 2/계의 열충격 특성에는 더 많은 영향을 받음을 알 수 있었다. l5wt% 이상의 ZrO/sub 2/(t) 첨가에서 인가전압이 증가 함에 따라 점차로 전기전도도가 증가 하였으나, ZrO/sub 2/(m)의 첨가에서는 영향이 없었다.

• 한국결정성장학회지
• /
• 제10권3호
• /
• pp.226-232
• /
• 2000

침지노즐(SEN)의 재료로 사용되는 지르코니아/흑연 재질에서 용강 및 슬래그에 의한 침식의 형태를 살펴본 결과, 침식의 첫번째 기구는 부분안정화 지르코니아 내 안정화제인 CaO가 용강 및 슬래그에 의해 용해되면서 입방정 안정화 지르코니아가 단사정상으로 상전이하여 일어났는데, 상전이 시 부피팽창에 의한 균열이 발생하고 파괴가 진행되었고, 이로 인하여 미세 $ZrO_2$입자의 용해 및 탈락이 촉진되었다. 침식의 두 번째 기구는 슬래그가 큰 c-$ZrO_2$입자의 입계를 따라 침투하여 작은 입자들로 분리시키고, 작은 입자들이 용강과 슬래그에 탈락되어 진행되었다. 마지막 기구로는 입방정 지르코니아와 흑연이 반응하여 다공질의 미세한 ZrC 상을 형성하고, 이들이 slag에 용해되면서 침식이 진행되었다.

• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.754-760
• /
• 1993

Hydroxyapatite(HAp)-zirconia composite ceramics were prepared by simplified synthesis process and then their properties were investigated. Composite powders of HAp and zirconia were successively synthesized under Ca/P=1.69, 1.71, 1.73 and pH=11 by precipitation method. HAp-zirconia ceramics were obtained with sintering of these various HAp-zirconia composite powders. These sintered bodies were mainly composed of HAp and ZrO2(tetragonal), but it was found that a little of HAp was decomposed into TCP as the amount of zirconia and the sintering temperature were increased. When HAp having 10~15wt.% ZrO2 content were sintered in the range of 1150 to 130$0^{\circ}C$, the apparent porosity was about 7~11%. This showed that the successive synthesis process employed here had a limit to obtian more densified composite ceramics.

• 한국세라믹학회지
• /
• 제45권2호
• /
• pp.126-131
• /
• 2008

In this study, we prepared zirconia gel by the sol-gel method and investigated its photoluminescence properties by varying pyrolysis temperature. The addition of acetic acid into a Zr-alkoxide solution resulted in forming the bidentate ligands with Zr ions and producing a stable gel. At the pyrolysis temperature of $350^{\circ}C$, the zirconia nanocrystals with tetragonal structure gradually appeared in the gel. The PL intensity of the zirconia gel increased with increasing the pyrolysis temperature up to $350^{\circ}C$, but decreased above the temperature. Concurrently, its PL peak wavelength continuously shifted from ${\sim}440\;nm$ to ${\sim}550\;nm$ with the temperature. The PL characteristics of the zirconia gels were closely associated with decomposition of residual organic groups, the formation of the zirconia nanocrystals, and the tetragonal to monoclinic phase transformation.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.361-368
• /
• 1990

The properties of the powder of ZrO2＋3m/o Y2O3 system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide near by Zr(OH)4 structure showed more excellent crystallinity and lower formation temperature of tetragonal ZrO2. In the range of this study, cubic ZrO2 was not formed and stability of tetragonal ZrO2 prepared in the conditiion of pH 7 was most excellent. Average particle sizes and specific surface areas of tetragonal ZrO2 powders, prepared as calcining amorphous zirconium hydroxides at $600^{\circ}C$ for 1h, were 0.6-0.8${\mu}{\textrm}{m}$ and 45-70$m^2$/g, respectively.

• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.267-273
• /
• 2016

본 연구에서는 부분 안정화 지르코니아(Z)와 자기치유능력을 부여하기 위하여 SiC와 $TiO_2$를 첨가한 5종류의 복합 지르코니아(ZS, ZST1, ZST2, ZST3, ZST5)를 소결하여, 기계적 특성과 열처리에 의한 균열 치유 가능성을 평가하였다. 6종류 지르코니아 세라믹스의 비커스 경도는 큰 차이가 없으며, 부분 안정화 지르코니아에 SiC 첨가(ZS)는 급격한 굽힘강도의 저하가 나타났지만, $TiO_2$의 첨가(ZST1, ZST2, ZST3, ZST5)는 강도가 향상하였다. 이는 SiC 및 $TiO_2$의 첨가의 따른 결정화의 영향이라 판단된다. 최고 굽힘 강도를 나타내는 균열 치유 조건에서 지르코니아 단상체는 비커스 균열이 남았으나, SiC가 첨가된 4종류는 비커스 균열이 관찰되지 않아 균열이 치유되었다.