• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.123-131
• /
• 2024

Plastic, the main material of FFF-type 3D printing, exhibits lower strength compared to metal. research aimed at increasing strength is needed for use in various industrial fields. This study analyzed three X-shape infill patterns(grid, lines, zigzag) with similar internal lattice structure. Moreover, tensile test considering weight and printing time was conducted based on the infill line multiplier and infill overlap percentage. The three X-shape infill patterns(grid, lines, zigzag) showed differences in nozzle paths, material usage and printing time. When infill line multiplier increased, there was a proportional increase in tensile strength/weight and tensile strength/printing time. In terms of infill overlap percentage, the grid pattern at 50% and the zigzag and lines patterns at 75% demonstrated the most efficient performance.

• Korean Journal of Metals and Materials
• /
• v.46 no.6
• /
• pp.377-381
• /
• 2008

Prism sheet of LCD BLU which depends on supply from Japan and U.S.A was studied by using Si anisotropic etching and injection molding technologies. First, the prism sheet was patterned on Si wafer through photolithography, and the best conditions of Si etching were determined through etching Si wafer with TMAH to obtain straight optimized zigzag patterns, and a cross pattern to provide light diffusion and concurrent focusing. The etch rate of TMAH was concluded to be constant for $25wt%-70^{\circ}C$ condition. Ni stamp of prism sheet was made by electrodeposition using patterned Si wafer, normal or fast H/C(Heating/Cooling) injections were carried out to fabricate prism sheet. It was known that fast H/C injection could fabricate prism sheet more accurately than normal injection. Zigzag patterns and the cross pattern showed higher transmissivity than the straight patterns because of light diffusion through diagonal direction. The fast H/C injection for zigzag patterns showed lower transmissivity than normal injection because there occurred more light diffusion through precise injection patterns, but the fast H/C injection for straight patterns showed only refraction without diffusion, causing lower transmissivity than normal injection.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.281-289
• /
• 2022

Presently, 3D printers manufactured by material extrusion are economical and easy to use, so they are being used in various fields. However, this study conducted a tensile test on the infill pattern and density of the PLA+ material, due to the limitations of long printing time as well as low mechanical strength. The infill area for the infill density change was measured, using a vision-measuring machine for four infill patterns (concentric, zigzag, honeycomb, and cross) in which the nozzle path was the same for each layer. The tensile strength/weight[MPa/g] and tensile strength/printing time[MPa/min] of the tensile specimens were analyzed. In this study, efficient infill density and patterns are suggested, for cost reduction and productivity improvement. Consequently, it was confirmed that the infill area and infill percentage of the four patterns, were not constant according to the infill pattern. And the tensile strength of the infill density 40% of the honeycomb pattern and infill density 20% of the cross pattern, tended to highly consider the weight and printing time. Honeycomb and cross patterns could reduce the weight of the tensile specimen by 19.11%, 28.07%, as well as the printing time by 29.56%, 52.25%. Tensile strength was high in the order of concentric, zigzag, honeycomb, and cross patterns, considering the weight and printing time.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.558-564
• /
• 2009

To aim at obtaining a correct and fine small pattern by an electron beam lithography several conditions and methods affecting a real pattern shape needs to be investigated. A micro/nano sized pattern shape is sometimes dependent on the scanning method. In this work, four types of scanning methods are implemented and their characteristics are investigated. For a $11\times11um$ pattern, a Zigzag scanning method proves a precise pattern generation. The other ways such as SEM scanning and swirl in-out scanning method result in some distorted pattern shape. It is proved that abrupt change in the pattern generation limits to obtaining a fine and small pattern.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.759-764
• /
• 2001

The separation performance of zigzag air classifier with angle of 90 degrees was studied using narrow size fractions of thin square samples and granular samples. The simulation results of air velocity inside the classifier indicated that the zigzag geometry induces a new pattern consisting of an upward flow and a circulation flow, Experimental results showed that overflow product recovery was described as an integral calculus of normal distribution as a function of dimensionless air velocity ( $V_{A}$ $V_{A50}$), where $V_{A}$ is superficial air velocity and $V_{A50}$ is the $V_{A}$ at the fifty percent recovery. The $V_{A}$ values were predicted using the equations derived from dynamics for a particle dropping in air. A monitoring system that utilizes changes in acoustic signals emitted during the process of air classification was developed to separate PET with desired recovery or grade. The technical feasibility of the on-line monitoring of the PET recovery and grade was demonstrated by measuring relative energy of the signals.signals.als.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1597-1599
• /
• 2007

In TFT-LCD, mura is a defect which degrades the display quality. The resistance difference between gate lines is the main cause of H-Block mura. Two methods could eliminate this defect. A thinner gate layer or gate fan-out pattern decrease mura level. H-Block mura has been reduced after implementing the new schemes.

• Journal of the Korean Society of Costume
• /
• v.55 no.6 s.96
• /
• pp.109-124
• /
• 2005

The object of this study was to identify the production technique and immediate constituent of lingerie by examining the materials and the sewing techniques. Various papers are referenced for theoretical study and the elements and techniques of lingerie are analyzed based on photographical materials. From the late 20C century to the present time was the research time period. This paper concludes as follows: 1 Decorative method: Lace, Ribbons, piping, elastic bands were some of the decorative materials attached to the garments by zigzag stitch. 2. Flat pattern making: Lingerie patterns were drafted in smaller size than the patterns of outer garments. Bias cut would be applied for the noll-stretchable fabrics. 3. Draping: Bias grain would be applied for the non-stretch fabric. When draping stretch fabrics, follow the grain line of the fabrics and pull the fabric so that it could fit onto the body. 4. Production technique: Straight stitch would be applied for non-stretch fabrics. Zigzag stitch would be applied for stretch fabrics.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.19-24
• /
• 2015

PURPOSES : The noise, which is typically generated by fast moving vehicles, can be intercepted by installing a noise barrier with a soundproof panel. However, reflections from the panels cause secondary noise, and hence lower the effectiveness of the panels. In this study, the reduction of reflection noise by considering the shape, especially zigzag one, of the soundproof panel have been evaluated. METHODS : The simulation model used in this study was Nord2000, which simulates real-road situations effectively. Based on the simulation results, the joining angle of $133^{\circ}$ with the pattern width (a) equal to 2 m and the projection height (b) equal to 0.5 m was adapted in the zigzag shape as the best profit designing factors. RESULTS: The measuring results at middle height, 15 m showed reduction at all points except the point with average -1.6 dB. At a greater height of 30 m, 2 points showed reduction. A real-sized facility was constructed to investigate the reflected sound from a zigzag shaped panel up to the height of 5 m. CONCLUSIONS: The reduction effects were detected in all the receive points in the range of 2-6 m distances and 1-5 m heights comparing the plane panel. Compared to plane panel, the noises are reduced at an average of 2.4 dBA.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.339-342
• /
• 2004

In this paper, we investigated methods to reduce SAR(Specific Absorption Rate) value with EMI(Electromagnetic Interference) paint distribution on front case of mobile handset. Simulations for several different EMI patterns were carried out. For the purpose of modeling, we used 3 dimensional CAD(Computer Aided Design) program, `Pro-engineering'. SAR simulation was done with SEMCAD, simulation platform for electromagnetic compatibility antenna design and dosimetry. In order to distinguish the individual pieces and to enable an assignment of the different material properties, each subfile was imported separately. In simulation, folding angle was set to $142^{\circ}.$ If we vary folding angle, different SAR value will be obtained. Among the tested EMI paint patterns, the hairpin pattern showed the best performance, i.e. the decrease efficiency of $16.5\%$ and horizontal-direction zigzag pattern showed the decrease efficiency of $12.2\%$ when we set the completely removed pattern as reference.