• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.359-363
• /
• 2013

Silicon carbide and its composites are being considered as a nuclear fuel cladding material for LWR nuclear reactors because they have a low neutron absorption cross section, low hydrogen production under accident conditions, and high strength at high temperatures. The SiC composite cladding tube considered in this study consists of three layers, monolith CVD SiC - $SiC_f$/SiC composite -monolith CVD SiC. The volume fraction of SiC fiber and surface roughness of the composite layer affect mechanical and corrosion properties of the cladding tube. In this study, various types of SiC fiber preforms with tubular shapes were fabricated by a filament winding method using two types of Tyranno SA3 grade SiC fibers with 800 filaments/yarn and 1600 filaments/yarn. After chemical vapor infiltration of the SiC matrix, the surface roughness and fiber volume fraction were measured. As filament counts were changed from 800 to 1600, the surface roughness increased but the fiber volume fraction decreased. The $SiC_f$/SiC composite with a bamboo-like winding pattern has a smaller surface roughness and a higher fiber volume fraction than that with a zigzag winding pattern.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.296-305
• /
• 2000

본 논문에서는 암호화된 디지털 워터마크를 JPEG 부호화 과정 중 양자화 계수에 합성하는 디지털 워터마킹 방법을 제안한다. 제안된 워터마킹 방법은 다음과 같다. 먼저 각 블록의 DCT 계수를 양자화 한 후 지그재그 스캔으로 양자화 계수를 1차원으로 배열하여 각 블록을 치환한다. 치환된 각 블록의 일정 영역의 양자화 계수에 암호화된 워터마크를 주파수의 우기성을 적용, 합성한다. 합성이 끝난 후 치환되기 전 순서로 다시 복원하여 부호화 과정을 거쳐 압축된 영상데이터를 얻는다. 본 논문에서 제안된 방식은 합성 전 블록 치환 알고리즘을 사용함으로써 보안을 최대한 유지하면서 많은 정보를 합성할 수 있다. 또한 양자화 계수의 일정 영역을 선택하여 암호화된 정보를 합성하기 때문에 용도에 따른 합성량을 조절 할 수가 있고, 영상 및 양자화 값과 상관없이 합성 데이터를 고정시킬 수 있는 장점이 있다. 본 논문에서는 실험을 통해서 그 결과를 검증하고 기존 연구와의 비교 및 그에 따른 성능을 분석하였다.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.472-480
• /
• 2005

It was proved the practical use of the unique traditional Korean paper through the previous researches. The purpose of this study was to suggest the adequate application which is making various applied patterns in the fashion products so as to contribute to textile, fashion, and Korean paper industry. Six kinds of vests with the same fashion material using the Korean traditional paper were manufactured in order to investigate the images of materials in case of wearing them on the actual human bodies. As the results of image assessment for the materials and the factor analysis, 'classical', 'natural', 'Korean traditional', 'rural' and 'luxury' images were presented as the representative image of the Korean traditional paper material. Making repeated patterns of stripes and zigzag by sewing-machine stitches showed the natural effect on Korean traditional paper. Well-matched harmony was shown between holes made by the needle in sewing and slits torn by the tension to the needle and the thread. Especially, transparency by irregular holes formed by artificial frictional washing could shown special formative arts harmoniously with semi-transparency of Korea traditional paper and touch of sewing yarn. After the unripe persimmon dyeing, holes made by the needle became more hard and tight. The changes were no longer shown by the artificial frictional washing and then fixed. As the result of applying the Korean traditional paper fashion materials with various patterns for the basic formed garments, it was shown that the common and simple garments were changed the garments with special formation which could be found on the art garments due to the creative touch and formative arts using the Korea traditional paper fashion material. A variety of formative application by means of the developed samples was suggested to enlarge the practicality. As the result of this study, it was discovered that the possibility and application of fashion goods through the developed samples made of Korean traditional paper.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.85-91
• /
• 2013

It is essential to reduce the amount of fossil fuel because facing with the natural problem such as a global warming. To achieve this goal, many of interests in the use of renewable energy is growing. Especially, as one of these renewable energy systems, a solar air heater invention has been conducted for enhancing the efficiency of solar air heater. According to this trend, scale-down sized experiment apparatus was constructed and performed for searching a proper fin and confirming the heat transfer performance by fin shape on constant heat condition to enhance efficiency of solar air heater. In this experiment, heat gain, convection heat transfer coefficient, number of transfer units, Nusselt number, Reynold's number, friction factor, performance factor were investigated in order to evaluate the thermal characteristics based on the real data obtained. By comparison with the each fin performance, a zigzag shape keeping a right angle to the plate had the highest value among them.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.1-10
• /
• 2004

The structural changes occurring in the isothermal crystallization processes of polyethylene (PE), poly-oxymethylene (POM), and vinylidene fluoridetrifluoroethylene (VDFTrFE) copolymer have been reviewed on the basis of our recent experimental data collected by the time-resolved measurements of synchrotron-sourced wide-angle (WAXS) and small-angle X-ray scatterings (SAXS) and infrared spectra. The temperature jump from the melt to a crystallization temperature could be measured at a cooling rate of 600-1,000 $^{\circ}C$/min, during which we collected the WAXS, SAXS, and infrared spectral data successfully at time intervals of ca. 10 sec. In the case of PE, the infrared spectral data clarified the generation of chain segments of partially disordered trans conformations immediately after the jump. These segments then became transformed into more-regular all-trans-zigzag forms, followed by the formation of an orthorhombic crystal lattice. At this stage, the generation of a stacked lamella structure having an 800-${\AA}$-long period was detected in the SAXS data. This structure was found to transfer successively to a more densely packed lamella structure having a 400-${\AA}$-long period as a result of the secondary crystallization of the amorphous region in-between the original lamellae. As for POM, the formation process of a stacked lamella structure was essentially the same as that mentioned above for PE, as evidenced from the analysis of SAXS and WAXS data. The observation of morphology-sensitive infrared bands revealed the evolution of fully extended helical chains after the generation of lamella having folded chain structures. We speculate that these extended chains exist as taut tie chains passing continuously through the neighboring lamellae. In the isothermal crystallization of VDFTrFE copolymer from the melt, a paraelectric high-temperature phase was detected at first and then it transferred into the ferroelectric low-temperature phase at a later stage. By analyzing the reflection profile of the WAXS data, the structural ordering in the high-temperature phase and the ferroelectric phase transition to the low-temperature phase of the multi-domain structure were traced successfully.

• 한국자기학회지
• /
• 제13권4호
• /
• pp.176-181
• /
• 2003

금속마스크에 의해 패턴된 교환결합 이중박막 NiO(10∼60 nm)/NiFe(10 nm)의 모서리에서 발생한 여러 종류의 자구벽(magnetic domain wall)을 MFM(magnetic_ force microscopy)로 측정하였다. 박막의 모서리 경계선이 교환결합이방성 방향과 같은 방향일 때는 직선모양의 Neel 자구벽이 측정되었으며, 경계면이 이방성방향과 수직인 경우에는 zigzag Bloch 자구벽이 발견되었다. 이러한 자구벽은 NiO(60 nm)인 경우에는 교환결합세기(H$_{ex}$ = 75 Oe)가 박막경계면에서 발생한 반자장(demagnetization field) 세기보다 크기 때문에 발생하지 않았고, 교환결합세기가 약한 NiO(30 nm, H$_{ex}$ = 21 Oe)를 갖는 이중박막에서는 발견되었다. 이들 자구벽이 외부 자기장의 변화에 따라 움직이는 자화반전과정을 측정하기위해 $\pm$300 Oe까지 자기장을 가하면서 MFM을 측정하였다.

• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.105-113
• /
• 2014

중앙에 균열을 갖는 단층 그래핀시트(single layer graphene sheet, SLGS)의 모드 II 파괴 거동을 원자 시뮬레이션과 해석 모델에 기초하여 고찰하였다. 지그재그 그래핀 모델의 파괴를 분자동역학(molecular dynamics, MD)에 의해 해석한 결과 모드 II 파괴인성은 $2.04MPa{\sqrt{m}}$인 것으로 밝혀졌다. 또한 SLGS의 이론적인 $K_{IIc}$를 유도하기 위해 면내전단하중을 받는 다공체에 대한 파괴역학적 해석도 진행하였고 유한요소해석도 병행하였다. 모드 I과 모드 II의 비를 다양하게 변화시켜가면서 SLGS 의 혼합모드 파괴를 검토한 결과 혼합모드 파괴조건식이 얻어졌고 다른 문헌의 결과와 비슷함을 알 수 있었다.

• 패션비즈니스
• /
• 제19권2호
• /
• pp.149-170
• /
• 2015

The purpose of this study is to link the Yi tribe's traditional patterns to bag design. Yi tribe is a minor ethic group in China, whose traditional pattern has a high artistic value in that its shapes are diverse and each one has peculiar elegance. Traditional patterns are also indicative of spiritual dept or symbolic stories, rather than being indicative of simple formative beauty. Thus, reorganizing these patterns and applying them artistically to design- in terms of resource utilization- would be significant. Out of all of the Yi tribe's traditional patterns, the cherry blossom_(马樱花), water wave_(水波), sky father and earth mother_(天父地母), pomegranate blossom, triangle, sheep' horn, wisteria vine_(藤条), square and diaper_(四角菱形) and the zigzag_(曲折) patterns were chosen for use during the development of a bag design. This study is based upon document study, including research papers and internet web sites, the point of which was to investigate the form of the traditional patterns, and the creative design process. The design procedure includes these sub-processes: selection, arrangement and color-scheme. In the selection process, the form of the pattern was edited using Adobe Photoshop. The pattern was freely arranged to reflect various emotions. In terms of the color-scheme of the patterns, the colors used by Henri Matisse(1869-1954) in his work were selected and adapted when dyeing the patterns. Subsequently, the final design resulting from these design development processes was applied to the actual production of the bag by using canvas fabric and leather, after which the bag image was proposed using computer simulation. In conclusion, six bag designs were created using traditional patterns from the Yi tribe. Through the processes explained above, this study confirmed that traditional patterns could be widely applied as design motifs and that more sophisticated, modern, and creative designs could be developed based on traditional patterns.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.106-110
• /
• 2012

Oblique angle deposition (OAD) is a physical vapor deposition where incident vapor flux arrives at non-normal angles. It has been known that tilting the substrate changes the properties of the film, which is thought to be a result of morphological change of the film. In this study, OAD has been applied to prepare single and multilayer TiN films by cathodic arc deposition. TiN films have been deposited on cold-rolled steel sheets and stainless steel sheet. The deposition angle as well as substrate temperature and substrate bias was changed to investigate their effects on the properties of TiN films. TiN films were analyzed by color difference meter, scanning electron microscopy, nanoindenter and x-ray diffraction. The color of TiN films was not much changed according to the deposition conditions. The slanted and zigzag structures were observed from the single and multilayer films. The relation between substrate tilting angle (${\alpha}$) and the growth column angle (${\beta}$) followed the equation of $tan{\alpha}=2tan{\beta}$. The indentation hardness of TiN films deposited by OAD was low compared with the ones prepared at normal angle. However, it has been found that $H^3/E^2$ ratio of 3-layer TiN films prepared at OAD condition was a little higher than the ones prepared at normal angle, which can confirm the robustness of prepared films.

• Bulletin of the Korean Chemical Society
• /
• 제14권6호
• /
• pp.713-717
• /
• 1993

The crystal structure of the potassium salt of penicillin V has been studied by the X-ray crystallographic methods. Crystal data are as follows; potassium 3,3-dimethyl-7-oxo-6-phenoxyacetoamido-4-thia-1- azabicyclo[3.2.0]-heptane-2${\alpha}$-carboxylate, $K^+{\cdot}C_{16}H_{18}N_2O_5S^-$, $M_r$= 388.5, triclinic, Pl, a= 9.371 (1), b= 12.497 (2), c= 15.313 (2) ${\AA},\;{\alpha}= 93.74\;(2),\;{\beta}=99.32\;(1),\;{\gamma}=90.17\;(1)^{\circ},\;V=1765.7\;(2)\;{\AA}^3$, Z=4, $D_m=1.461\;gcm^{-1},\;{\lambda}(Cu\;K{\alpha})=1.5418\;{\AA},\;{\mu}=40.1\;cm^{-1}$, F(000)=808, T=296 K. The structure was solved by the heavy atom and difference Fourier methods with intensity data measured on an automated four-circle diffractometer. The structure was refined by the full-matrix least-squares method to a final R= 0.081 for 3563 observed $[I_0{\geq}2{\sigam}(I_0)]$ reflections. The four independent molecules assume different overall conformations with systematically different orientations of the phenyl groups although the penam moieties have the same closed conformations. There are intramolecular hydrogen bonds between the exocyclic amide nitrogen and phenoxy oxygen atoms. The penam moiety is conformationally very restricted although the carboxyl and exocyclic amide groups apparently have certain rotational degrees of freedom but the phenyl group is flexible about the ether bond despite the presence of the intramolecular N-H${\cdots}$O hydrogen bond. There are complicated pseudo symmetric relationships in the crystal lattice. The penam moieties are related by pseudo 20.5 screw axes and the phenyl groups by pseudo centers of symmetry. The potassium ions, related by both pseudo symmetries, form an infinite zigzag planar chain parallel to the b axis. Each potassium ion is coordinated to seven oxygen atoms in a severely distorted pentagonal bipyramid configuration, forming the infinite hydrophilic channels which in turn form the molecular stacks. Between these stacks, there are only lipophilic interactions involving the phenyl groups.