• 제목/요약/키워드: ZigBee Topology

검색결과 16건 처리시간 0.02초

Suggestion for method to improve power consumption of the ZigBee RF4CE platform

  • Woo, Eun-Ju;Moon, Yu-Sung;Kim, Jung-Won
    • 전기전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.476-479
    • /
    • 2018
  • This paper proposes a method for reducing the amount of current consumption by the transceiver based remote control and the ZigBee RF4CE network layer step. We have studied how to improve power efficiency at short transition time through duty rate management. Also, comparing the measured current consumption before and after the improvement, we confirmed the correlation between the data transmission speed improvement and the current reduction.

ZigBee 토폴로지를 이용한 스마트 홈 네트워크 시스템 설계 (Design of Smart Home Network System based on ZigBee Topology)

  • 유단;김광준;이진우
    • 한국전자통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.537-543
    • /
    • 2012
  • 스마트 홈 시스템은 종합적인 네트워크 지능 홈 제어 시스템에서 실제적이며, 자동제어 시스템, 컴퓨터 네트워크 시스템과 네트워크 통신 기술이다. 지능적인 홈 시스템은 사용자로 하여금 가옥, 무선 원격 제어, 터치스크린 전화, 인터넷 또는 음성 인식 제어 가정용 장치를 화면 조작 또는 장치들을 연결함으로서 보다 편리하게 해줄 수 있다. 본 논문에서는 상호간의 서로 다른 상태의 동작에 따른 사용자 요구가 필요가 없는 상호간의 통신이 가능한 다양한 종류의 지능적인 가정용 장치를 구현함으로서 사용자가 대단히 효율적이고 편리하며 안전하도록 설계하였다.

신뢰모델기반의 ZigBee 네트워크 구성 및 신뢰성 측정 (ZigBee Network Formation based on Trust Model and Trustworthiness Measurement)

  • 황재우;박호현
    • 한국정보통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.1284-1294
    • /
    • 2010
  • USN을 구성 하는 중요 기술로 평가 받고 있는 ZigBee는 근거리 통신을 지원하는 IEEE 802.15.4 표준 가운데 하나로, 라우팅 방식으로 주소 할당 방식을 바탕으로 한 계층적 라우팅과 라우팅 테이블에 기반을 둔 요구형 경로 탐색 방식을 지원한다. 계층적 라우팅은 라우팅 테이블을 사용하지 않고, 자식 노드 또는 부모 노드를 중간 노드로 선택 하여 데이터를 전달하기 때문에 네트워크 토폴로지가 전체적인 네트워크 성능을 좌우하게 된다. 본 논문에서는 ZigBee 네트워크 구성 시 깊이와 편차가 큰 LQI 값만을 이용하여 부모 노드를 선택하는 방식에서 신뢰 모델을 추가 하여 좀 더 신뢰성 있는 네트워크 토폴로지를 구성하는 알고리즘과 신뢰 모델을 활용하여 전체적인 네트워크의 신뢰도를 측정하는 방법을 제안하였고 NS-2를 이용한 네트워크 시뮬레이션과 MG2400 ZigBee 보드로 구현하여 성능을 검증하였다.

Minimizing the power consumption of ZigBee RF4CE Certified Platform

  • Jung, Taek-Soo;Kim, Jung-Won
    • 전기전자학회논문지
    • /
    • 제15권4호
    • /
    • pp.287-292
    • /
    • 2011
  • The RF4Control stack is used with microcontrollers and IEEE(R) 802.15.4 transceivers. This paper explains the setup and power consumption measurements for the transceiver based remote controller and target node. It is assumed the reader of this paper has knowledge about RF4CE. The current consumption measurements are made using the ZigBee Platform included with the RF4Control stack. he current consumption measurements are presented, and battery life time is calculated for an remote controller. Note that the results presented in this paper are intended as a guideline only. A variety of factors will influence the battery life calculation and final measurements and calculations should be performed on ZigBee RF4CE Certified Platform.

Monitoring System of Agriculture Fields using ZigBee Modules

  • Ayurzana, Odgerel;Tsagaanchuluun, Sugir
    • International journal of advanced smart convergence
    • /
    • 제10권1호
    • /
    • pp.89-96
    • /
    • 2021
  • The goal of this study is to develop experiment monitoring system of agriculture fields using ZigBee wireless modules. Soil moisture, ambient temperature, atmospheric pressure and intensity of sunlight are the most important factorsto grow a wheat crop and other vegetables. In orderto monitorthe factorssoil moisture (YL69), air pressure (BMP180), temperature (DS18B20), photoresistor were used for sensing environment data. The TI CC2530 RF SoC chip was used in the system. ZigBee modules were connected to star topology. ZigBee modules send data wirelessly to a data center. This data can be displayed and analyzed on the main monitoring program as needed also sent to the client mobile. Characteristics of the sensors were determined by experiment results.

Integration of Wireless Body Area Networks (WBANs) and WAN, WiMAX and LTE

  • Hu, Long;Dung, Ong Mau;Liu, Qiang;Han, Tao;Sun, Yantao
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제7권5호
    • /
    • pp.980-997
    • /
    • 2013
  • Nowadays, wireless communication has a great advantage in technology. We use wireless devices almost in all expected life such as: entertainment, working and recently in the healthcare area, where Wireless Body Area Networks (WBANs) become a hot topic for researchers and system designers. Recent work on WBANs focus on related issues to communication protocol, especially ZigBee network is fine tuned to meet particular requirements in healthcare area. For example, some papers present real-time patient monitoring via ZigBee communication given the short distance between body sensors and remote devices, while the other work solve the limited coverage problem of Zigbee by designing mechanisms to relay Zigbee data to other types of wire or wireless infrastructure. However, very few of them investigate the scenarios of ZigBee coexisting or integrated with other networks. In this paper, we present the real-time data transmission from ZigBee end devices to Wide Area Network (WAN), Worldwide interoperation for microwave access network (WiMAX) and Long Term Evolution network (LTE). We provide in detail the ZigBee gateway components. Our simulation is conducted by OPNET, we visualize many topology network scenarios in ZigBee hybrid system. The results in simulation show that ZigBee end devices can successfully transmit data in real-time to other network end devices.

ZigBee 응용을 위한 900MHz CMOS RF 송.수신기 구현 (Implementation of a CMOS RF Transceiver for 900MHz ZigBee Applications)

  • 권재관;박강엽;최우영;오원석
    • 대한전자공학회논문지TC
    • /
    • 제43권11호
    • /
    • pp.175-184
    • /
    • 2006
  • 본 논문은 ZigBee 응용을 위한 900MHz ISM 밴드용 RF 송 수신기 설계에 관한 기술이다. 수신단은 저잡음 증폭기, 하향믹서, 프로그래머블 이득증폭기, 밴드패스필터로 구성되며, 송신단은 밴드패스필터, 프로그래머블 이득증폭기, 상향믹서, 구동증폭기로 구성된다. 송 수신단은 Low-IF 구조를 사용하였다. 또한, 송 수신단을 구성하는 각각의 블록은 저전력 기술을 사용하여 전체적인 전류 소모를 줄였다. Post-레이아웃 시뮬레이션으로 전체 송 수신기의 성능을 검증하였으며, 0.18um RF CMOS 공정을 이용하여 칩으로 구현하였다. 측정결과 제작된 칩셋은 -92dBm의 최소 수신 입력 레벨을 갖으며, 0dBm의 선형적인 최대 송신 출력 레벨을 갖는다. 또한, 전력 소모는 32mW(@1.8VDD)이며, ESD 방지 다이오드 패드를 포함한 칩 면적은 $2.3mm{\times}2.5mm$이다.

ZigBee 무선계측/경보 시스템을 위한 클러스터 기반의 AODV (Cluster-based AODV for ZigBee Wireless Measurement and Alarm Systems)

  • 박재원;김홍록;이연정
    • 제어로봇시스템학회논문지
    • /
    • 제13권9호
    • /
    • pp.920-926
    • /
    • 2007
  • Establishing a fixed path for the message delivery through a wireless network is impossible due to the mobility. Among the number of routing protocols that have been proposed for wireless ad-hoc networks, the AODV(Ad-hoc On-demand Distance Vector) algorithm is suitable in the case of highly dynamic topology changes, along with ZigBee Routing(ZBR), with the exception of route maintenance. Accordingly, this paper introduces a routing scheme focusing on the energy efficiency and route discovery time for wireless alarm systems using IEEE 802.15.4-based ZigBee. Essentially, the proposed routing algorithm utilizes a cluster structure and applies ZBR within a cluster and DSR (Dynamic Source Routing) between clusters. The proposed algorithm does not require a routing table for the cluster heads, as the inter-cluster routing is performed using DSR. The performance of the proposed algorithm is evaluated and compared with ZBR using an NS2 simulator. The results confirm that the proposed Cluster-based AODV (CAODV) algorithm is more efficient than ZBR in terms of the route discovery time and energy consumption.

대규모 무선 센서 네트워크를 위한 계층적 클러스터 트리 기반 분산 주소 할당 기법 (A Hierarchical Cluster Tree Based Address Assignment Method for Large and Scalable Wireless Sensor Networks)

  • 박종준;정훈;황소영;주성순
    • 한국통신학회논문지
    • /
    • 제34권12B호
    • /
    • pp.1514-1523
    • /
    • 2009
  • 현재 무선 센서 네트워크의 주소 할당 기법들은 수백 개 이상의 노드로 구성된 대규모 센서 네트워크를 지원함에 있어 한계를 갖고 있다. WSNs 관련 대표적인 표준화 단체인 ZigBee Alliance에서는 균형 트리 기반의 주소 영역을 구성한 후, 트리 구조에 맞추어 네트워크의 주소를 할당하는 분산 주소 할당 기법이 제시되었다. 하지만 일반적으로 실제 배치된 네트워크는 균형 트리 구조를 갖지 않으며 이로 인해 주소의 낭비 및 고갈이 발생한다. 본 논문에서는 이러한 단점을 해결하기 위해 다수의 균형 트리를 동적으로 구성하는 계층적 클러스터 트리 기반 분산 주소 할당 기법을 제시한다. 제안된 방안에서는 16-bit 주소 영역을 클러스터 식별자 영역과 클러스터 내 주소 영역으로 구분하여 각 클러스터 내부에서는 균형 트리 기반 분산 주소 할당 기법을 사용하고, 주소 고갈 발생시에는 동적으로 새로운 클러스터를 형성하여 주소를 할당한다. 시뮬레이션을 통한 성능 분석에서는 제안된 프로토콜이 기존의 기법보다 주소 사용의 효율 및 고아 노드 발생 부분에서 향상된 결과를 보여준다.

Performance Evaluation of Multi-Hop Communication Based on a Mobile Multi-Robot System in a Subterranean Laneway

  • Liu, Qing-Ling;Oh, Duk-Hwan
    • Journal of Information Processing Systems
    • /
    • 제8권3호
    • /
    • pp.471-482
    • /
    • 2012
  • For disaster exploration and surveillance application, this paper aims to present a novel application of a multi-robot agent based on WSN and to evaluate a multi-hop communication caused by the robotics correspondingly, which are used in the uncertain and unknown subterranean tunnel. A Primary-Scout Multi-Robot System (PS-MRS) was proposed. A chain topology in a subterranean environment was implemented using a trimmed ZigBee2006 protocol stack to build the multi-hop communication network. The ZigBee IC-CC2530 modular circuit was adapted by mounting it on the PS-MRS. A physical experiment based on the strategy of PS-MRS was used in this paper to evaluate the efficiency of multi-hop communication and to realize the delivery of data packets in an unknown and uncertain underground laboratory environment.