• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.265-313
• /
• 2010

Kyoto Protocol is an international convention on concrete performance program for UNFCCC(United Nations Framework Convention on Climate Change), which regulate and prevent to global warming and officially came into effect on February 16, 2005. Kyoto flexible mechanisms, the agreed environmental system in March 1997 in the Third Conference of Parties in UNFCCC General Assembly, Emission Trading System(ETS), Clean Development Mechanism(CDM) and Joint Implementation(JI), are key policies related to environment. In advanced countries, greenhouse gas emissions should be reduced average 5.2% level compared to 1990 in total emissions during 2008-2012. World leading carbon market finished the trial on the EU ETS I greenhouse gas emissions trading system, EU ETS II is operated regularly after 2008. World Bank leads to make 'Prototype Carbon Fund(PCF)' in April 2004, which is the world first carbon fund and a representative public carbon fund type, World Bank operate various funds including present PCF. Thus, I would like to propose as follows in relation to this study: First, in the validity analysis of carbon funds, it would be needed to analyze the Emission Reduction Cost Efficiency(ERCE) of carbon. The ERCE is a break-even value which brings the Net Present Value(NPV) to zero. NPV approach is used among projects and it enables potential projects to be compared and evaluated the ERCE on the basis of the net present value of net future cash flows. Therefore, according to results of analysis, carbon funds should be developed and invested. Second, it would be necessary to allow of issuing bonds together with carbon funds, carbon finance etc. Third, carbon funds, it would be reasonable to have a relatively enough maturity in project and as a financial derivatives in the international financial markets, it is needed various types of transactions. Fourth, it would be needed to standardize the carbon emissions trading for more efficiently. Fifth, it would be necessary to establish and invest in various kinds of domestic and overseas global carbon funds, including governments, privates, governments and privates sectors. And it is also needed to establish the medium and long term plans for carbon funds. Sixth, it would be needed to foster the advanced trade mechanisms for carbon funds in the most effective ways. Finally, carbon funds should be used in harmony with international societies to reduce global warming as the social responsible investing funds and it should be contribute to sustainable development. In addition, it would seem that carbon funds should be studied on establishing the contributable standard of sustainable development in the future assignment.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.521-527
• /
• 2016

Nanoscale zero valent iron (nZVI) has been intensively studied for the treatment of a plethora of pollutants through reductive reaction, however, the nano size should be of concern when nZVI is considered for water treatment, due to difficulties in recovery. The loss of nZVI causes not only economical loss, but also potential risk to human health and environment. Thus, the immobilization onto coarse or structured support is essential. In this study, two representative processes for nZVI immobilization on granular activated carbon (GAC) were evaluated, and optimized conditions for synthesizing Fe/GAC composite were suggested. Both total iron content and $Fe_0$ content can be significantly affected by preparation processes, therefore, it was important to avoid oxidation during preparation to achieve higher reduction capacity. Synthesis conditions such as reduction time and existence of intermediate drying step were investigated to improve $Fe_0$ content of Fe/GAC composites. The optimal condition was two hours of $NaBH_4$ reduction without intermediate drying process. The prepared Fe/GAC composite showed synergistic effect of the adsorption capability of the GAC and the degradation capability of the nZVI, which make this composite a very effective material for environmental remediation.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.227-230
• /
• 2000

Batch cultivations of Anaerobiospirillum succiniciproducens have been systematically studied for the economical production of succinic acid from wood hydrolysate with corn steep liquor(CSL) as a nitrogen source. CSL was found to be an alternative complex nitrogen source for A. succiniciproducens when glucose and wood hydrolysate were used as carbon sources. Compared with polypeptone and/or yeast extract, CSL had similar effects on fermentation performance such as succinic acid yield and a ratio of succinic acid to acetic acid in the fermentation of wood hydrolysate as well as glucose. This means that succinic acid can be produced more economically from wood hydrolysate and CSL than relatively expensive carbon and nitrogen sources. Besides its low cost, the alternative medium served as a green technology for succinic acid production because it gives a net-zero effect on global warming.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.2
• /
• pp.101-106
• /
• 1982

This study was undertaken to determine tensile properties and low-cycle fatigue behavior of 0.6%C high carbon steel used of structural purposes at temperatures up to 500.deg.C. In the low-cycle fatigue test the upper limit was decided by elongation(i.e. the total strain range), while the lower limit was defined by the load (i.e. zero load). The following results were obtained. Both, the ultimate tensile strength and low-cycle fatigue resistance attain the maximum values near 250.deg.C. Above this temperature the values decrease rapidly as the temperature increases. The low-cycle fatigue resistance decreases whenever there is an increase of the total strain range. Because the hardness of cycle fatigued specimen correlates cyclic hardening and cyclic softening, therefore the hardness of cycle fatigued specimen is smaller than that of the nonfatigued specimen at room temperature and 500.deg.C but much larger than the hardness of the nonfatigued specimen near 250.deg.C.

• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.45-53
• /
• 1992

Sponataneous ignition characteristics for granulated activated carbon were observed by performing experiments at constant ambient temperature and varying the ambient temperature sinusoidally. In case of varying the ambient temperature sinusoidally, the amplitudes of temperature were 5$^{\circ}C$, 1$0^{\circ}C$ and 15$^{\circ}C$ respectively, and the period in each amplitude was varied at an interval of 30minutes from zero to 3hours. As the results of experiments at a constant ambient temperature, the critical spontaneous ignition temperature of the sample decreased as the sample vessel size increased. Apparent activation energy of the sample calculated from the Frank-Kamenetskii's thermal Ignition theory was 38.82［kca1/mo1］ In case of varying the ambient temperature sinusoidally, the critical spontaneous ignition tempera-ture was lower than that at the constant ambient temperature, and the minimum critical spontaneous ignition temperature decreased with the amplitude of heating sinusoidal curve. At the same amplitude, the critical spontaneous ignition temperature decreased until it reached the minimum point and then in-creased as the period increased.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.10-16
• /
• 1994

This study aimed at measuring the latent heat of phase transformation of S45C carbon steel in quenching and at conducting the analytical researches into the calculation of cooling curves including the latent heat. The temperature of phase transformation of steel and its latent heat are dependant upon the cooling rates at the temperature of A1 phase transformation point. The effect of the latent heat of phase transformation is especially manifest at the cooling curve of center of specimens. The higher the cooling rates became, the lower fell the temperature region of phase transformation. In the figures of cooling rates, the phenomena of cooling rate dropping into zero was caused by the latent heat of phase transformation.

• Environmental and Resource Economics Review
• /
• v.9 no.3
• /
• pp.489-513
• /
• 2000

This paper introduces a new method to estimate and decompose sources of carbon dioxide emissions using an input-output model with decomposition method free of residual usually associated with this kind of analysis. This method is different from others, using what we call 'mean rate-of-change index (MRCI)' for weights of the decomposed terms. Ang et al.(1998) asserted that logarithmic mean divisia index(LMDI) is superior to Laspeyres index(LI) or simple average divisia index(SADI) since it reduces residual to zero. We claim that our method is an improvement over the other methods because it enables residual free decomposition even when data contain negative values, the case which LMDI cannot handle. We demonstrate by way of showing some examples that our method is superior to LI, SADI(Proops, 1993 and Chung, 1998) or LMDI(Ang et al., 1998).

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.43-50
• /
• 2001

This paper reviews the results of a series of efforts to develop structure-activity models for slow-reacting chemicals and olefins whose toxicity may be enhanced by the ultraviolet radiation. Photoinduced toxicity of 14 compounds was found to be a different result of competing factors of structure, having carbon-carbon double bonds. To mimic the biological consequences of photooxidative damage in mammalian cells, the photochemical mutagenicith of 14 chemicals was tested in the CAS. Simple olefins were photochemically mutagenic or carcinogenic with irradiation, increasing the alkylating activity from zero level to 0.87(abs/gram) for styrene, 0.25 for 1-butene, 0.11 for 1-hexene, respectively, whereas no photochemical mutagenicity was observed with 1-octene in the absence of the CAS. Oxide compounds, however, showed a decreasing trend of photoalkylating activities in the presence or absence of the CAS. We found that the structure-activity relationship was not applicable to our data.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.321-327
• /
• 1991

Experiments of quenching were made with cylindrical specimens of carbon steel S45C of diameters from 12 to 30mm were performed. The specimens were heated by electric furnace and quenched by immersion method. In order to analyze the temperature profile(cooling curves) of carbon steel including the latent heat of phase transformation, nonlinear heat conduction problem was calculated by the numerical method of inverse heat conduction problem using the apparent heat capacity method. The difference between the calculated and the experimented cooling curves was caused by the latent heat of phase transformation, and the effects of the latent heat were especially manifest at the cooling curves of center of specimens. The temperature and the quantity of the latent heat of phase transformation depend on the cooling speed at A sub(1) transformation point, and the region for cooling speed to become zero was caused by the latent heat of phase transformation.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.151-157
• /
• 2022

The transition to renewable energy, especially the expansion of photovoltaic (PV) generation, has become a global megatrend that can no longer be reserved. However, since the site for PV is limited, it is necessary to use the land efficiently. As an alternative, the concept of utility scale agricultural PV(UAPV) is a technology that continues farming in the lower part and installs PV in the upper part of farmland to efficiently use the land. Therefore, for UAPV, the growth of crops in the lower part and the optimal operation of PV in the upper part are important. In this, we analyze the characteristics of the upper PV generation system in the UAPV based on the empirical results under various conditions, and propose future research directions of the UAPV.