• International Journal of Safety
• /
• 제5권2호
• /
• pp.6-11
• /
• 2006

The time delay in servo control on LonWorks/IP Virtual Device Network (VDN) is highly stochastic in nature. LonWorks/IP VDN induced time delay deteriorates the performance and stability of the real-time distributed control system and hinders an effective preventive and predictive maintenance. Especially in real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. In order to guarantee the stability and performance of the system for effective preventive and predictive maintenance, LonWorks/IP VDN induced time delay needs to be predicted and compensated for. In this paper position control simulation of DC servo motor using Zero Phase Error Tracking Controller (ZPETC) as a feedforward controller, and Internal Model Controllers (IMC) based on Smith predictor with disturbance observer as a feedback controller is performed. The validity of the proposed control scheme is demonstrated by comparing the IMC based on Smith predictor with disturbance observer.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.33-39
• /
• 2007

LonWorks/IP VDN은 LonWorks 디바이스 네트워크와 IP(데이터) 네트워크와의 통합네트워크로 산업현장에 대한 유비쿼터스 접근을 제공하여 설비에 대한 예지 및 예방보전을 가능하게 한다. 산업현장에 대한 예지 및 예방보전을 위한 실시간 분산제어 환경에서 즉각적인 응답은 필수불가결한 요소이다. LonWorks/IP 가상 디바이스 네트워크(VDN) 상에서 불확실한 시간지연은 산업현장에 대한 실시간 예지 및 예방보전을 위해 분산 제어를 수행할 때 시스템의 안정성과 성능을 악화시킨다. 따라서 네트워킹 된 분산제어시스템의 안정성을 보장하고 성능을 개선하기 위해서는 시간에 따라 가변적인 불확실한 시간지연을 보상할 필요가 있다. 본 논문에서는 LonWorks/IP VDN와 같은 분산제어 환경 하에서 서보 제어를 수행하는 경우에 외란관측기와 위상지연 보상기로 ZPETC(Zero Phase Error Tracking Controller)를 도입한 제어구조가 제시되고 컴퓨터 모의실험이 수행된다. 제안된 제어기의 성능은 컴퓨터 모의실험을 통하여 외란관측기를 도입한 Smith 예측기 기반의 내부모델제어기(IMC)의 제어결과와 비교 제시된다. 제안된 제어기는 외란과 잡음에 강인한 특성을 가지며, 주기적인 신호에 대한 추종성능을 상당히 개선시키므로 가변적인 시간지연을 갖는 LonWorks/IP VDN 상에서 주기적인 작업 수행에 필요한 분산 서보제어에 매우 적합하다.

• 로봇학회논문지
• /
• 제11권2호
• /
• pp.92-99
• /
• 2016

An electro-hydraulic actuator (EHA) is widely used in industrial motion systems and the increasing bandwidth of EHA position control is important issue. The model-inverse feedforward controller is known to extend the bandwidth of system. When the system has non-minimum phase (NMP) zeros, direct model inversion makes system unstable. To overcome this problem, an approximate model-inverse method is used. A representative approximate model inversion method is zero phase error tracking control (ZPETC). However, if zeros locate right half plane of z-plane, the approximate inverse model amplifies the high-frequency response. In this paper, to solve the problem of ZPETC, an adaptive model-inverse control is proposed. The adaptive algorithm updates feedforward term in real-time. The effectiveness of the proposed adaptive model-inverse position control strategy is verified by comparison with typical proportional-integral (PI) control and feedforward control by experiments. As a result, the proposed adaptive controller extends the bandwidth of EHA position control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.94-99
• /
• 2005

Though the technology on the ultra-precise machining has been developed intensively, the high speed and high precision for large machining range is still very hard to achieve. The linear motor system fur the universal machining center is proper fur high speed and high precision, but it has drawback of sensitivity to disturbance. In this research, two degrees of freedom controller based on the zero phase error tracking controller (ZPETC) and disturbance observer are proposed to improve the tracking performance and dynamic stiffness of linear motor system. The proposed controller is verified in simulations and experiments on a nano-positioner system, and the experimental result shows that the tracking performance improved. In addition, the PID optimization method is proposed for the commercialized controller such as the PMAC based system. The tracking as well as impedance is included in the cost function of optimization.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.51-60
• /
• 2005

This paper describes a robust control scheme for high-speed and long stroke scanning motion of high precision linear motor system consisting of linear motor, air bearing guide and position measurement system using heterodyne interferometer. Nowadays, semiconductor process and inspection of wafer or LCD need high speed and long travel length for their high throughput and extremely small velocity fluctuations or tracking errors. In order to satisfy these conditions, linear motor system are widely used because they have large thrust force and do not need motion conversion mechanisms such as ball screw, rack & pinion or capstan with which the system are burdened. However linear motors have a problem called force ripple. Force ripple deteriorates the tracking performances and makes periodic position errors. So, force ripple must be compensated. To maximize the tracking performance of linear motor system, we propose the control scheme which is composed of a robust control method, Time Delay Controller (TDC) and a feedforward control method, Zero Phase Error Tracking Control (ZPETC) for accurate tracking a given trajectory and an adaptive force ripple compensation (AFC) algorithm fur estimating and compensating force ripple. The adaptive ripple compensation is continuously refined on the basis of tracking error. Computer simulation results based on modeled parameters verify the effectiveness of the proposed control scheme for high-speed, long stroke and high precision scanning motion and show that the proposed control scheme can achieve a sup error tracking performance in comparison to conventional TDC control.