• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.690-695
• /
• 1994

Simultaneous removal of phosphorus and nitrogen from wastewater was studied by the anaerobic-aerobic system of activated sludge. In the anaerobic stage, most of the influent glucose was removed and orthophosphate was released, when the nitrate and/or nitrite concentration in the wastewater was almost zero. The amount of the released phosphorus was found to be directly proportional to the amount of the removed glucose. When the ratio of phosphorus to glucose in the influent was less than 0.04, the phosphorus in the wastewater was almost completely removed during the aerobic state. Under the anaerobic condition, activated sludge released phosphate and excess removal of phosphate occurred during the aerobic condition. Namely, the stress received in anaerobic period stimulated the uptake of phosphorus in aerobic period. The amounts of phosphorus release in the anaerobic and uptake in the aerobic stage were less in proportional to the concentration of $NO_x-N$. Further, if the initial ratio of $NO_2-N$/glucose was less than 0.37, the inorganic nitrogen in the influent could be completely removed.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.50-58
• /
• 2007

In this paper, the optimum position of optical phase conjugator (OPC) and the optimal dispersion coefficients of fiber sections in $16{\times}40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km are induced, in order to expand the availability of mid-span spectral inversion (MSSI) technique in long-haul multi-channel transmission systems. It is confirmed that the compensation degrees of overall WDM channels are more improved by applying the induced optimal parameters into WDM system than those in WDM system with the conventional MSSI. So it is expected that the proposed optimal parameters should alternate with the forming method of the symmetrical distributions of optical power and local dispersion with respect to OPC, which generate a serious problem in the applying OPC into multi-channels WDM system if it is not formed. It will be possible to realize the flexible system design by applying the methods proposed in this paper into the real WDM system with OPC.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.468-477
• /
• 2007

The DTC of voltage source inverter-fed PMSMs is based on hysteresis controllers of torque and flux. It has several advantages, namely, elimination of the mandatory rotor position sensor, less computation time, and rapid torque response. In addition, the stator resistance is the only parameter, which should be known, and no reference frame transformation is required. The DTC theory has achieved great success in the control of induction motors. However, for the control of PMSM drives proposed a few years ago, there are many basic theoretical problems that must be clarified. This paper describes an investigation into the effect of the zero voltage space vectors in the DTC system and points out that if using it rationally, not only can the DTC of the PMSM drive be driven successfully, but torque and flux ripples are reduced and overall performance of the system is improved. The implementation of DTC in PMSM drives is described and the switching tables specific for an interior PMSM are derived. The conventional eight voltage-vector switching table, which is namely used in the DTC of induction motors does not seem to regulate the torque and stator flux in a PMSM well when the motor operates at low speed. Modelling and simulation studies have both revealed that a six voltage-vector switching table is more appropriate for PMSM drives at low speed. In addition, the sources of difficulties, namely, the error in the detection of the initial rotor position, the variation of stator resistance, and the offsets in measurements are analysed and discussed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.4
• /
• pp.55-63
• /
• 1997

Constructed wetland system which can be applied to the rural wastewater treatment system was examined by pilot plant in Kon-Kuk University. Hydraulic loading rate of wastewater was about 0.16m$^3$/m$^2$. day and theoretical detention time in the system was 1.38 days. The effluent of the septic tank for the school building was applied as inflow to the system. The influent concentration of DO was zero but effluent was up to 4.37mg/${\ell}$ which implies that oxygen was supplied enough from atmosphere by reaeration to support biological activity of the system. Average influent concentration of BOD was 104mg/${\ell}$ and effluent was 24mg/${\ell}$ with average removal rate of 76%. Average influent concentration of COD was 215mg/${\ell}$ and effluent was 63mg/${\ell}$ with average removal rate of 70 % . Average influent concentration of SS was 78mg/${\ell}$ and effluent was 10mg/${\ell}$ with average removal rate of 87%. Two components, BOD and SS, are regulated by law to keep maximum water quality standard of 80mg/${\ell}$ when daily outflow rate is less than 100$m^3$/day which is the case of most rural communities. Therefore, the results from the experiment showed that constructed wetland system can meet the water quality standard easily. Average influent concentration of total nitrogen was 165mg/lwhich is relatively higher than normal wastewater, and effluent was about 156mg/${\ell}$ with average removal rate of only 6%. Average influent concentration of total phosphorus was 41 mg/${\ell}$ and effluent was 6mg/${\ell}$ with average removal rate of 87%. Overall, constructed wetland system was thought to be effective to treat wastewater if nitrogen removal mechanism is improved. Considering low cost, less maintenance, and high treatability, this system can be a practical alternative for the wastewater treatment in rural area The experiment was performed during the summer and fall season, and treatment efficiency of the system is expected to decrease in low temperature. therefore, further study including temperature is required to evaluate feasibility of the system more in detail.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.105-112
• /
• 1985

This research was carried out to investigate the optimal conditions ssociated with the RIA procedures such as a bridging phenomena, prozone effects and a new separation methods etc. The results obtained were summarized as follows: 1. The lgG fractions of donkey anti-rabbit IgG sera were purified by Protein-A-Sepharose affinity column, which indicates that Protein-A an affinity for IgG class of donkey antiserum. 2. In coating the IgG fraction on polystryene tubes, incubation conditions made no differences between 2 hr at room temperature and overnight at 4$^{\circ}C$. 3. There were no significant differences between 1st antibody-coated tube and 2nd antibody-coated tube as a separation method when compared in terms of reproducbility. A better reproducibility may be expected if the titers of 1st antibody for the progesterone to be assayed and of corresponding 2nd antibody are reasonably high. 4. The titers of anti-progesterone antibody for 3H-progesterone and progesterone-11HS-125I were 1:300 and 1:700 in liquid-phase, and 1:100 and 1:300 in solid-phse for the separation methods. 5. A bridging phenomena in which a standard curve is long and shallow were observed when progesterone-11HS-125I was used for the tracer, but not in 3H-progesterone. 6. A prozone effect in a solid-phase system, especially 1st antibody-coated tube method was observed which the degree of inhibition was significantly different although zero bindings look the same. In this case, the titration curve should be made both in the absence and in the presence of a, pp.opriate amount of competiter, standard, respectively.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.131-140
• /
• 2017

Multipath TCP (MPTCP) is a transport layer protocol that simultaneously transmits data using multiple interfaces. MPTCP is superior to existing TCP in network environment with homogeneous subflows, but it shows worse performance compared to existing TCP in network environment with bufferbloat. If a bufferbloat occurs in one of the MPTCP multipaths, the packet will not arrive at the MPTCP receive buffer due to a sudden increase in delay time, resulting in a HoL blocking phenomenon. It makes the receive window of the other path to be zero. In this paper, we apply Adaptive Random Early Detection (ARED), Controlled Delay (CoDel) and Proportional Integral Controller Enhanced (PIE) among the proposed Active Queue Management (AQM) to limit the delay of bufferbloat path. Experiments were conducted to improve the performance of MPTCP in heterogeneous networks. In order to carry out the experiment, we constructed a Linux-based testbed and compared the MPTCP performance with that of the existing droptail.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.559-566
• /
• 2004

In general, the certainty factors of the fuzzy production rules and the certainty factors of fuzzy propositions appearing in the rules are represented by real values between zero and one. If it can allow the certainty factors of the fuzzy production rules and the certainty factors of fuzzy propositions to be represented by interval -valued fuzzy sets, then it can allow the reasoning of rule-based systems to perform fuzzy reasoning in more flexible manner. This paper presents fuzzy Petri nets and proposes an interval-valued fuzzy backward reasoning algorithm for rule-based systems based on fuzzy Petri nets Fuzzy Petri nets model the fuzzy production rules in the knowledge base of a rule-based system, where the certainty factors of the fuzzy propositions appearing in the fuzzy production rules and the certainty factors of the rules are represented by interval-valued fuzzy sets. The algorithm we proposed generates the backward reasoning path from the goal node to the initial nodes and then evaluates the certainty factor of the goal node. The proposed interval-valued fuzzy backward reasoning algorithm can allow the rule-based systems to perform fuzzy backward reasoning in a more flexible and human-like manner.

• Journal of KIISE:Software and Applications
• /
• v.31 no.5
• /
• pp.625-631
• /
• 2004

In general, the certainty factors of the fuzzy production rules and the certainty factors of fuzzy Propositions appearing in the rules are represented by real values between zero and one. If it can allow the certainty factors of the fuzzy production rules and the certainty factors of fuzzy propositions to be represented by interval-valued fuzzy sets, then it can allow the reasoning of rule-based systems to perform fuzzy reasoning in more flexible manner(15). This paper presents a fuzzy Petri nets and proposes an interval-valued fuzzy reasoning algorithm for rule-based systems based on fuzzy Petri nets. Fuzzy Petri nets model the fuzzy production rules in the knowledge base of a rule-based system, where the certainty factors of the fuzzy Propositions appearing in the furry production rules and the certainty factors of the rules are represented by interval-valued fuzzy sets. The proposed interval-valued fuzzy set reasoning algorithm can allow the rule-based systems to perform fuzzy reasoning in a more flexible manner.

• The Korean Journal of Physiology
• /
• v.18 no.1
• /
• pp.9-17
• /
• 1984

The second inward current $(i_{si})$ was studied by the two microelectrode voltage clamp technique in the sino-atrial node of the rabbit. The slow component $(i_{si,2})$ of the second inward current was sometimes identified and $i_{si}$ behaved as if it were a mixture of two currents. We analysed the $(i_{si,2})$ in relation to membrane potential and frequency of voltage clamp pulses. 1) Membrane was held at -40mV which was usually found to be zero current level. When depolarizing pulses were applied, the slow inward current $(i_{si})$ was activated. 2) It was shown that there are three categories of the $i_{si}$ activation by the low level of depolarizing clamp pulses. Moderately fast inward current with single component was developed in most cases in the presence of tetrodotoxin(TTX). But sometimes there was two separate components of $i_{si}$ activation in the peak level and the time course. Thirdly the only slow component of $i_{si}$ was found in rare cases. 3) The activation of $(i_{si,2})$ was dependent upon membrane potential. The $i_{si}$ shows two separate peaks during clamp depolarizations and higher clamp pulses lead to fusion of the peaks. 4) The $i_{si,2}$ activation showed that it decreased with repetitive clamp pulses and it was more evident in higher frequencies(2Hz)(negative staircase).

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.258-265
• /
• 2011

A zero-dimensional global model simulator for atmospheric pressure oxygen plasmas has been developed. The simulation model considers the configurations similar to that of plasma needle device. The simulation results show that those species of O, $O_3$, $O_2*$ and ${O_2}^+$ have the highest density in sequence. Electrons dissipate most of their energy through the collisions with oxygen molecules. If the input power increases, the density of most species also increases as much as three-boy collision for the creation of ozone is weakened and hence the density of ozone decreases. The body to volume ratio also affects the plasma density.