• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.285-291
• /
• 1998

The purpose of this study was to asses the shear bond strengths of 3 types of glass ionomer cement and 1 type of composite resin to dentinal surface with or without ZOE pretreatment. 80 extracted tooth specimens are divided into two groups; the control group (40 specimens) is not treated with ZOE and the other(40 specimens) is ZOE pretreated during 24 hours before bonding procedure. Shear bond strengths were measured with universal testing machine (Instron, Model 4301) and statistically processed by ANOVA and t-test. The results were as follows: 1. Bond strength of the ZOE treated experimental group showed lower than the control group, except chemical cured glass ionomer cement(p<0.05). 2. After ZOE surface treatment, the bond strength of composite resin was superior than glass ionomer cement and all experimental group was decreased (p<0.05). 3. It has nothing to do with ZOE surface treatment, that chemical curing glass ionomer cement was showed lowest bond strength.

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.134-140
• /
• 1992

The purpose of this study was to investigate the antibacterial effect of zinc oxide eugenol(ZOE), zinc phosphate cement(ZPC), glass ionomer cement, resin, and Vitapex to S. muntans, S. sanguis, S. fecalis and E. coli by agar diffusion method. Four wells were punctured in mitis-salivarius agar plate per each group and each wells were filled with restorative matetials. The width of inhibition zones produced in mitis - salivarius agar were measured as the parameter of the antibacterial effect after 16 hours and 40 hours. In S. mutans and S. sanguis, the largest inhibition zone was produced on ZOE, followed by glass ionomer cement, and ZPC. Inhibition zones was not observed in resin and Vitapex. In S. fecalis, ZOE and glass ionomer cement showed wider inhibition zone than ZPC. In E. coli, ZOE showed wider inhibition zone than ZPC, but no inhibition zone was observed on glass ionomer cement.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.161-171
• /
• 1989

The purpose of this study was to evaluate and compare the sealing ability of ZOE, FR and Sealapex, as a root canal sealer. Ninety six extracted anterior or premolar human teeth with single root were instrumented by using conventional method. After instrumentation, the teeth were divided into three groups and thirty two teeth in each group were filled as follows: ZOE group: ZOE cement as a root canal sealer in combination with guttapercha cone FR group: FR root canal sealer in combination with guttapercha cone Sealapex group: Sealapex root canal sealer in combination with guttapercha cone $^{45}Ca$ in the form of calcium chloride, was employed as the tracer in this study and produce the auto-radiograph. The depth of isotope penetration into the root canal was evaluated by method by Yates and Hembree at the intervals of 1 day, 7 days, 14 days and 30 days. The following conclusions were derived from the results obtained; 1. After 1 day, ZOE group exhibited the greatest penetration degree of radioisotope (p < 0.05). 2. After 14 days, there was some difference of the radioisotope penetration between each group, but its difference was not significant statistically. 3. After 30 days Sealapex group exhibited the least penetration degree of radioisotope (p < 0.025). 4. In ZOE and Sealapex groups, there was no change of the degree of radioisotope penetration with time.

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.147-152
• /
• 2006

The purpose of this study was to evaluate the influence of the AH-26 root canal sealer on the shear bond strength of composite resin to dentin. One hundred and forty four (144) extracted, sound human molars were used. After embedding in a cylindrical mold, the occlusal part of the anatomical crown was cut away and trimmed in order to create a flat dentin surface. The teeth were randomly divided into three groups; the AH-26 sealer was applied to the AH-26 group, and zinc-oxide eugenol (ZOE) paste was applied to the ZOE group. The dentin surface of the control group did not receive any sealer. A mount jig was placed against the surface of the teeth and the One-step dentin bonding agent was applied after acid etching. Charisma composite resin was packed into the mold and light cured. After polymerization, the alignment tube and mold were removed and the specimens were placed in distilled water at $37^{\circ}C$ for twenty four hours. The shear bond strength was measured by an Instron testing machine. The data for each group were subjected to one-way ANOVA and Tukey's studentized rank test so as to make comparisons between the groups. The AH-26 group and the control group showed significantly higher shear bond strength than the ZOE group (p<0.05). There were no significant differences between the AH-26 group and the control one (p>0.05). Under the conditions of this study, the AH-26 root canal sealer did not seem to affect the shear bond strength of the composite resin to dentin while the ZOE sealer did. Therefore, there may be no decrease in bond strength when the composite resin core is built up immediately after a canal filling with AH-26 as a root canal sealer.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.198-203
• /
• 2008

The purpose of this study was to compare the sealing abilities of four endodontic temporary restorative materials using a methylene blue dye penetration test under dynamic loading. Standardized access cavities were prepared in forty-four intact human permanent molar teeth, and the cavities were restored with Caviton, MD-Temp, IRM, or ZOE. After thermocycling, an intermittent load of 98 N at 1 Hz was applied for 1,000 cycles to the long axis of the functional cusp of each of the teeth, which were immersed in a 1% methylene blue solution. The teeth were split in half, and the linear depth of dye penetration was evaluated according to the criteria. The results were analyzed using one-way ANOVA (p = 0.05) and Duncan's multiple range test. The results demonstrated that Caviton and MD-Temp showed significantly lower microleakage than IRM and ZOE. It was concluded that Caviton and MD-Temp exhibited better sealing ability than IRM and ZOE under dynamic loading.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.198-203
• /
• 2008

The purpose of this study was to compare the sealing abilities of four endodontic temporary restorative materials using a methylene blue dye penetration test under dynamic loading. Standardized access cavities were prepared in forty-four intact human permanent molar teeth, and the cavities were restored with Caviton, MD-Temp, IRM, or ZOE. After thermocycling, an intermittent load of 98 N at 1 Hz was applied for 1,000 cycles to the long axis of the functional cusp of each of the teeth, which were immersed in a 1% methylene blue solution. The teeth were split in half, and the linear depth of dye penetration was evaluated according to the criteria. The results were analyzed using one-way ANOVA (p = 0.05) and Duncan's multiple range test. The results demonstrated that Caviton and MD-Temp showed significantly lower microleakage than IRM and ZOE. It was concluded that Caviton and MD-Temp exhibited better sealing ability than IRM and ZOE under dynamic loading.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.77-97
• /
• 1989

The purpose of this study was to observe the effect of ${\beta}GP$ in the remaining dental pulp tissue after pulpotomy in the dogs' teeth. For vital pulpotomy, 72 dogs' teeth were used and class V cavities were prepared and the pulps were amputated. ZOE and Dycal (Caulk Co., USA) were placed over the amputated tissue and cavities were sealed with ZOE cement in the control group. In the experimental group, ${\beta}GP$, ${\beta}GP$-ZOE, ${\beta}GP$-Dycal were placed over the exposed pulp tissues respectively. Dogs were sacrificed after 1, 2 and 4 weeks following the operations and the teeth were decalcified in the nitric acid, sectioned and stained with HE for light microscopic examination. For electron microscopic examination, specimens were made after 2 and 4 weeks following the operation. A comparative microscopic examination revealed as follows. 1. The dentin bridge was formed continuously due to osteodentin in the ${\beta}GP$-Dycal group at the 2nd week, the dentin bridge composed of osteodentin and tubular dentin was observed at the 4th week. 2. Osteodentin formation was vigorously in the ${\beta}GP$-Dycal than in the Dycal group. 3. In the surface of osteodentin the osteodentinoblasts showing vivid synthetic activity were observed and the matrix vesicles were presented during calcification of osteoid dentin matrix. 4. The dentin bridge formation was not observed in ${\beta}GP$ group and ${\beta}GP$-ZOE group.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• The Journal of the Korean dental association
• /
• v.24 no.3 s.202
• /
• pp.199-203
• /
• 1986

치과용 인상재는 구강내에서 치아나 주위조직을 정확히 인기하여야 하며 조작이 간편하고 유동성이 충분하며 경화시간이 적당하고 값도 저렴해야 한다. 또 구강내에서 제거할 때 영구변형이나 파절되지 않는 충분한 강도와 크기의 정확성도 있어야 하며 자극이나 독성이 없고 인체에 안정성이 있고 모형재와 친화성이 있으며 보관중에도 변질해서는 안된다. 그러나 인상재는 서로 상이한 특성이 있고 장단점이 각각 다르므로 모든 조건에 일치하는 인상재는 거의 없다. 따라서 여러 인상재중에서 가장 적합한 인상재를 선택하는 것이 중요한 과정이다. 즉 인상재의 특성과 응용을 알고 선택할땐 보다 정밀한 모형을 얻을 수 있다. 기록에 의하면 18~19세기경에 최초로 인상용 왁스를 사용한 이래 19세기 중엽에 인상용 석고, 1925년에 agar, 1930년 ZOE, 1945년 앨지네이트, 1957년 실리콘, 1967년 polyether 및 1975년 부가중합형 실리콘이 사용되었으며 인상재가 유연성과 탄성이 있는가 경고하며 비탄성인가 또는 온도변화와 화학반응으로 경화되는 가에 따라서 ZOE paste, 인상용 석고, 인상용 왁스, 인상용 콤파운드, 수성콜로이드(agar, 앨지네이트), polysulfide, 실리콘(축중합형, 부가중합형) 및 polyether 인상재등 10여종으로 분류된다.

• Clinical Endoscopy
• /
• v.55 no.5
• /
• pp.691-694
• /
• 2022