• 제목/요약/키워드: Z-method

검색결과 2,414건 처리시간 0.03초

CMM 데이터로부터 방전조건 결정 (Determination of EDM Parameters from CMM Data)

  • 주상윤
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.35-39
    • /
    • 1998
  • Determination of effective EDM parameters is significant to increase productivity. However, With the complexity of EDM phenomena, a universal selection method of EDM parameters has not been established yet. Moreover, No attempt has been tried before to suggest a logical method in determining essential machining parameters for effective electrical discharge machining. Peak current, one of the most significant factors in EDM, is proportional to EDM area. This paper presents a method that can be Z-map modeling from CMM data, and calculate EDM area using Z-map.

  • PDF

Z-correction, a new method to improve TFT mask set overlay for TFT production yield enhancement

  • Ekberg, Peter;Sjostrom, Fredrik;Stiblert, Lars
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.598-601
    • /
    • 2005
  • Z-correction is new method to be used when measuring pattern registration of photomasks. The method is based on measurement of the plate profile in the Zaxis and takes into account the impact on the registration deviations caused by plate support, contamination as well as the photomask flatness itself. Z-correction further facilitates a more neutral way of judging the overlay properties between individual photomasks within a mask set.

  • PDF

3차원 임플리시트 곡면 렌더링을 위한 시프트(shifted) 멀티 Z-버퍼 앤티 앨리어싱 연구 (A Study on Shifted Multi-Z-Buffers Anti-Aliasing for 3D Implicit Surface Rendering)

  • 박화진;김학란
    • 한국멀티미디어학회논문지
    • /
    • 제8권2호
    • /
    • pp.249-257
    • /
    • 2005
  • 본 논문은 3차원 임플리시트(implicit) 곡면을 렌더링할 때 시프트 멀티 Z-버퍼를 이용하여 앨리어싱을 줄이는 것을 목적으로 한다. 복셀로 표현된 임플리시트 곡면은 고해상도를 사용하면 앤티 앨리어싱 효과를 볼 수 있지만 시간이 많이 걸리는 단점이 있다. 따라서 복셀로 표현되는 곡면을 렌더링할 때 저해상도에서도 양질의 이미지를 생성하는 새로운 앤티 앨리어싱이 필요하다. 이에 각 복셀마다 여러 개의 Z-버퍼를 이동함으로써 샘플링되는 값을 다양화하고 평활하는 방법을 제안한다. 이 방법은 메모리의 효율성을 고려하여 연산이 간단하고 필터링 적용이 쉬운 장점이 있다. 다만 Z-버퍼의 개수를 증가시키면 시간소비량이 증가하므로 향후 과제로서 이미지의 질 향상 정도와 소비시간증가의 관계를 수치로 나타내는 연구가 요구된다.

  • PDF

Z-단면 복합재 스트링거의 크리플링 해석 (Crippling Analysis of Z-Section Composite Stringers)

  • 권진회
    • Composites Research
    • /
    • 제12권6호
    • /
    • pp.65-73
    • /
    • 1999
  • 본 연구에서는 Z-단면 복합재 스트링거의 크리플링 응력 및 파손 거동을 비선형 유한요소법을 사용하여 해석하였다. 스트링거는 9절점 쉘요소를 사용하여 이상화하였다. 취성이 강한 재료에 적합한 완전제하 모델을 사용하여 초기 파손 이후 크리플링이 발생할 때까지의 점진적 파손해석을 수행하였다. 완전제하모델을 사용한 수치적 해석을 위해 수정된 Riks방법을 도입하였다. 해석의 타당성 검증을 위해 좌굴응력 크리플링 응력을 기존 시험결과와 비교하였다. 해석결과 Z-단면 스트링거의 크리플링 응력은 플렌지의 폭이 가장 큰 영향을 미치는 것으로 나타났고,적층순서에 따라서는 $[{\pm}45/0/90]s$에서 크리플링 응력 및 부분좌굴 응력이 가장 높게 나타났다.

  • PDF

WPMM 방법을 이용한 레이더 강수량 추정 : 1. 1998년 여름철 관악산 DWSR-88C를 위한 Ze-R 관계식 산출 (Radar Rainfall Estimation Using Window Probability Matching Method : 1. Establishment of Ze-R Relationship for Kwanak Mt, DWSR-88C at Summer, 1998)

  • 김효경;이동인;유철환;권원태
    • 한국수자원학회논문집
    • /
    • 제35권1호
    • /
    • pp.25-36
    • /
    • 2002
  • 1998년 여름철, 기상레이더와 레이더 주위의 고밀도 우량계 관측자료를 이용하여 $Z_{e}-R$ 관계식을 산출하기 위하여 관악산 레이더 자료와 강우강도 자료의 확률밀도함수를 구해 확률이 같은 지점을 매치시키는 Window Probability Matching Method(WPMM)라는 통계적 방법을 사용하였다. 레이더 반사도의 확률 분포는 약 15dBZ에서 가장 많은 빈도 분포를 보였고 강우강도의 확률분포는 대부분의 영역에서 시간당 10mm 이하의 비가 내리는 것으로 나타났다. WPMM을 이용한 $Z_{e}-R$ 관계식은 로그 좌표계에서 곡선형의 분포를 가지고 있어 직선형의 분포를 가지는 멱급수 형태의 관계식에 비해 반사도를 강우량으로 전환하는데 있어 더 나은 것으로 나타났다. 특히, 3개월 동안의 누적 강수량 산출시 $Z=200R^{1.6}$ 식은 실제 우량계 강수량의 44%만을 추정하는데 반해 WPMM의 경우는 실제 강수량의 80%까지 근접하는 것으로 나타났다.

Development of Isotope Dilution-Liquid Chromatography/Tandem Mass Spectrometry as a Candidate Reference Method for the Determination of Folic Acid in Infant Milk Formula

  • Jung, Min-Young;Kim, Byung-Joo;Boo, Doo-Wan;So, Hun-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권5호
    • /
    • pp.745-750
    • /
    • 2007
  • An isotope dilution-liquid chromatography/tandem mass spectrometric method was developed as a candidate reference method for the accurate determination of folic acid in infant milk formula. Sample was spiked with 13C5-folic acid and then extracted with phosphate buffer (pH 6) solution. The extract was further cleaned up by deproteinization followed by a C18 solid-phase extraction cartridge. The extract was analyzed by using LC/ ESI/MS/MS with selectively monitoring the collisionally induced dissociation channels of m/z 442 → m/z 295 and m/z 447 → m/z 295, which are the neutral glutamyl loss from the [M+H]+ ions of folic acid and 13C5-folic acid, respectively. LC/MS/MS chromatograms showed substantially reduced background from chemical noises compared to LC/MS chromatograms. Repeatability and reproducibility studies showed that the LC/MS/ MS method is a reliable and reproducible method which can provide less than 1.5 relative percentage of method precision.

Z-map으로 표현된 수직 벽면을 가진 금형에서의 접촉처리법과 클로버형 컵 디프드로잉 공정의 해석에의 응용 (Contact treatment algorithm of z-map model with vertical walls and its application to the deep drawing of a clover shaped cup)

  • 서의권;박정환;심현보
    • 한국생산제조학회지
    • /
    • 제7권5호
    • /
    • pp.38-45
    • /
    • 1998
  • The Z-map model which is quite similar to the non-parametric patch is widely used to describe the shape of a surface because of its simplicity. Despite the inherent advantage of z-map model. it has drawbacks that there exists difficulty in expressing the vertical walls and its related contact treatment method. In the region of vertical walls, there is a convergence problem in searching the contact point. In this study a contact point finding scheme is presented, based on the z value of the z-map model on the sheet normal direction. To show the utility of this scheme a compared with the experimental results. The effects of the Z-map grid distances and the interpolations of the inside Z-map value are also discussed.

  • PDF

디지탈 영역에서의 다항식 행렬의 분해와 MIMO LBR 구현에의 응용 (Polynomial matrix decomposition in the digital domain and its application to MIMO LBR realizations)

  • 맹승주;임일택;이병기
    • 전자공학회논문지S
    • /
    • 제34S권1호
    • /
    • pp.115-123
    • /
    • 1997
  • In this paper we present a polynomial matrix decomposition algorithm that determines a polynomial matix M(z) which satisfies the relation V(z)=M(z) for a given polynomial matrix V(z) which is paraconjugate hermitian matrix with normal rank r and is positive semidenfinite on the unit circle of z-plane. All the decomposition procedures in this proposed method are performed in the digitral domain. We also discuss how to apply the polynomial matirx decomposition in realizing MIMO LBR two-pairs.

  • PDF

조합화학 기법을 이용한 Y1-x(P1-y-zNbyVz)O4:Eux 형광체의 합성 및 빛 발광 특성 (Synthesis and Photoluminescence Properties of Y1-x(P1-y-zNbyVz)O4:Eux Phosphors by Modified Combinatorial Chemistry Method)

  • 전일운;손기선;박희동
    • 대한화학회지
    • /
    • 제46권1호
    • /
    • pp.69-75
    • /
    • 2002
  • 조합화학 기법을 이용하여 청색 및 적색 발광을 하는 $Y_{1-x}(P_{1-y-z}Nb_yV_z)O_4:Eu_x$ 형광체를 합성하였다. 합성한 $Y_{1-x}(P_{1-y-z}Nb_yV_z)O_4:Eu_x$ 형광체에 대하여 254 nm 및 147 nm 여기 하에서의 발광 세기에 관한 라이브러리를 완성하였고, 또한 형광체의 결정성과 입자 현상은 XRD와 SEM으로 특성을 관찰하였다. 조합검색 결과로부터 $Y_{1-x}(P_{1-y-z}Nb_yV_z)O_4:Eu_x$ 형광체의 발광특성은 P 자리에 치환되는 금속이온의 영향을 많이 받았다. 결과적으로 $Y_{0.88}PO_4:Eu_{0.12}$ 형광체와 비교하여 발광 효율이 우수한 새로운 $Y_{0.88}(P_{0.92}Nb_{0.05}V_{0.03})O_4:Eu_{0.12}$ 형광체를 찾아내었다.