• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.975-980
• /
• 2001

Like composite material. the coil winding pack of the KSTAR (Korea Superconducting Tokamak Advanced Research) consist of multiphase element such as metallic jacket material for protecting superconducting cable, vacuum pressurized imprepregnated (VPI) insulation, and corner roving filler. For jacket material, four CS (Central Solenoid) Coils, $5^{th}$ PF (Poloidal Field) Coil, and TF (Toroidal Field Coil) use Incoloy 908 and $6-7^{th}$ PF coil, Cold worked 316LN. In order to analyze the global behavior of large coil support structure with coil winding pack, it is required to replace the winding pack to monolithic matter with the equivalent mechanical properties, i.e. Young's moduli, shear moduli due to constraint of total nodes number and element numbers. In this study, Equivalent Young's moduli, shear moduli, Poisson's ratio, and thermal expansion coefficient were calculated for all coil winding pack using Finite Element Method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.145-146
• /
• 2008

• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.69-78
• /
• 2007

This study was performed to compare the stress distribution pattern in the crestal cortical bone and cancellous bone using 3-dimensional finite element stress analysis when 2 different Young's modulus(high modulus, model 1; low modulus, model 2) of cancellous bone was assumed. For the analysis, a finite element model was designed to have two square-threaded implants fused together and located at first and second molar area. Stress distribution was observed when vertical load of 200N was applied at several points on the occlusal surfaces of the implants, including central fossa, points 1.5mm, 2mm, 3mm and 3.5mm buccally away from central fossa. The results were as follows; 1. In both model, the maximum Von-Mises stress in the crestal cortical bone was greater when the load was applied at the central point, points 1.5mm and 2mm buccally away from central fossa than other cases. 2. In the cortical bone around first and second molar, model 2 showed greater Von-Mises stress than model 1. It is concluded that when the occlusal contact is afforded, the distribution of stress varies depending on the density of cancellous bone and the location of loading. More favorable stress distribution is expected when the contact load is applied within the diameter of fixtures.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.180-187
• /
• 2005

This paper is focused on the development of the flexible electrode for disc-type polymer actuators using Segmented Polyurethane(SPU). This paper consists of two parts. The one is about the mechanical property such as elastic modulus. these parameters mainly affect behaviors of polymer actuators and the other is about the electro-chemical property such as the surface resistance of the composite electrode affects the strength of electrostatic force, results in the deformation of polymer actuators. The Young's modulus was measured by UTM. As result, by increasing the modulus of a body of polymer actuators, the maximum displacement of polymer actuators are decreased. The surface resistance of the electrode was measured by 4 point probe system. Compared with the conductive silver grease, the displacement of polymer actuators using carbon black(CB) composite electrodes is comparably small but CB composite electrode should be the practical approach for the improvement of the performance of all-solid actuators, compared with another types of electrode materials.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• 폴리머
• /
• 제35권6호
• /
• pp.526-530
• /
• 2011

바이오매스에서 유래된 2,5-dihydroxymethylfuran(DHMF)을 $KMnO_4$ 산화반응으로 furan-2,5-dicarboxylic acid(FDCA)를 합성하였다. 합성한 FDCA와 다이올류를 에스테르화 반응과 축중합 반응을 진행시켜 폴리에스터를 중합하였다. 폴리에스터는 NMR을 통해 조성을 분석하였고 DSC와 TGA를 통해 열적특성을 분석하였다. 합성된 폴리에스터의 고유점도는 0.78~1.2 dL/g으로 상용화된 poly(ethylene terephthalate)(PET)와 비슷하였다. 다이올의 길이가 증가할수록 Young's modulus와 strength는 낮아지고 elongation-to-break는 높아지는 경향을 확인하였다. 합성한 poly(ethylene furandicarboxylate)(PEF)의 Young's modulus는 3551 MPa, strength는 103 MPa로 상용화된 PET와 비슷하였다.

• 폴리머
• /
• 제34권4호
• /
• pp.346-351
• /
• 2010

복합체의 기계적 물성 중에서 특히 충전제 형태와 함량에 따라 폴리프로필렌 복합체의 모듈러스 변화에 미치 는 영향에 관해 연구하였다. Eshelby의 중첩원리를 바탕으로 Lee와 Paul에 의해 제안된 두 개의 종횡비, ${\rho}_\alpha=a_1/a_3$과 ${\rho}_\beta=a_1/a_2$를 가지고 분석한 3차원 타원체의 이론적 예측을 실험값과 비교 분석하였다. 충전제의 형태를 SEM을 이용해 관찰하였고, 종횡비는 통계적 방법으로 계산하였다. 구의 형태를 띠는 황산바륨의 횡단방향과 종단방향의 모 듈러스가 이론적 예측과 유사한 결과를 보였다. 유리섬유의 경우 충전제의 함량이 증가함에 따라 $x_1$방향의 모듈러스 가 증가하였지만, $x_3$ 방향의 증가는 상대적으로 작았다. 또한, 2개의 종횡비가 기계적 물성에 미치는 영향에 대해 운모를 가지고 연구하였다.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.91-98
• /
• 2009

A reliable tensile test technique for PDP's barrier rib materials was introduced. A tensile specimen was prepared by punching out of green sheet, curing the specimen in a high temperature furnace, attaching sand paper tabs on each grip ends, and then attaching two strain gages for the strain monitoring and specimen alignment. Preliminary tensile tests were successfully done with the specimens made from ZnO-based lead-free green sheet. The specimens cured at 3 different maximum curing temperatures were tested to demonstrate the applicability of the test method. The Young's modulus was 88 ${\pm}$ 4 GPa regardless of the maximum curing temperature. The ultimate tensile strength was decreased with increasing the temperature. The tensile test method proposed in this study was proven to be reliable, useful and easy to estimate the bulk mechanical properties of barrier rib materials.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.471-479
• /
• 2022

In this paper, vibrational attributes of double-walled carbon nanotubes (CNTs) has been studied based upon nonlocal elastic shell theory. The implication of small scale is being perceived by establishing nonlocal Love shell model. The wave propagation approach has been operated to frame the governing equations as eigen value system. The comparison of local and nonlocal model has been overtly explored by means of scaling parameter. An appropriate selection of material properties and nonlocal parameter has been considered. The influence of changing mechanical parameter Young's modulus has been studied in detail. The dominance of end condition via nonlocal parameter is explained graphically. The results generated furnish the evidence regarding applicability of nonlocal shell model and also verified by earlier published literature.

• 한국전산구조공학회논문집
• /
• 제22권4호
• /
• pp.343-348
• /
• 2009

본 연구에서는 분자동역학 전산모사와 미시역학 모델을 이용하여 나노입자의 체적분율이 높은 경우 나노 입자의 크기효과와 체적분율 효과가 나노복합재의 기계적 물성에 미치는 영향을 효과적으로 묘사할 수 있는 순차적 브리징 해석기법을 제안하였다. 체적분율이 12%로 고정된 상태에서 나노입자의 크기변화에 따른 영률과 전단계수를 분자동역학 전산모사를 통해 예측한 후, 이를 연속체 모델에서 구현하기 위해 다중입자모델을 적용하였다. 나노입자의 크기효과를 반영하기 위해 입자와 기지 사이에 유효계면을 추가적인 상으로 도입하였고, 12%의 체적분율 조건에서 나타날 수 있는 체적분율 효과는 나노복합재를 둘러싸는 가상의 영역인 무한영역의 물성값의 변화를 통해 조절되도록 하였다. 유효계면과 무한영역의 물성을 입자의 반경에 대한 함수로 근사한 후 다양한 입자의 크기에서 나타나는 나노복합재의 물성변화의 예측이 가능하도록 하였다. 제안된 브리징 해석기법의 적용을 통해 분자동역학 해석결과와 잘 일치하는 결과를 연속체 모델에서 효율적이고 정확하게 얻을 수 있었다. 또한 유효계면의 두께와 물성 변화가 나노복합재의 기계적 물성에 미치는 영향을 고찰하였다.