This study was designed to examine the relationship between clinical symptoms, self-efficacy, and performance of women with osteoarthritis. It is a survey study of 60 women who were diagnosed as osteoarthritis and given medical treatments from September, 2005 to October, 2005 in hospital 'H' located in Yongin-si. For clinical symptoms, radiographs of the subjects' knees were taken and evaluated the pathology grade by the Kellgren-Lawrence grade. Pain and stiffness was measured by the measure of WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index), and functional reach test was measured in order to examine balancing abilities. Self-efficacy was measured by a tool which has revised the ASES (Arthritis Self-Efficacy Scale), and performance was measured by recording the difficulty of the WOMAC measurements themselves, and the time taken for 20 m walking, going up and down 9 stairs, and 5 sit-down and stand-up repetitions. The resulting differences in the other variables according to performance and the relationship between performance with variables are the following. First, an increase in pain in women with osteoarthritis led to decreased functional ability. Second, an increase in stiffness in women with osteoarthritis led to a decrease in functional ability. Third, a decrease in balance in women with osteoarthritis led to a decrease in functional ability. Fourth, a decrease in self-efficacy in women with osteoarthritis led to a decrease in functional ability. Fifth, the variables for estimating the performance by self-report were pain and self-efficacy. The variables for estimating the performance by recording the time taken was balance and self-efficacy. As a result factors such as pain, balance and self-efficacy in women with osteoarthritis were closely related to performance. Based on the results, it seems that physical therapy programs to decrease pain and to increase the balance in women with osteoarthritis, and psychological approaches to increasing self-efficacy are needed. I hope that the results of this study will be useful data for clinical management and intervention for women with osteoarthritis.
Although the problem of personal data leakage is reported to be serious, there has been no research that tries to excavate out that real cause of the leakage in scientific prospective. Although this topic is considered to be crucial, there have been no literatures relevant to the topic, and the reason for this limitation is that scientific approach to this problem was not feasible. In this respect, in this paper a model for such scientific analysis and a methodology of analysis have been devised. Results show that the degree of rigidity turns out be the determinant that vindicates the degree of leakage. The notion of data rigidity is revealed to be very strongly correlated to the number of hacking incidents in each country. The notion of resident data freedom was then deployed in this paper to determine the world-wide ranking for a slew of different countries. The United Kingdom and the Republic of Korea turned out to be the two extreme countries that lie in the spectrum of the scale, with UK the most flexible and ROK one of the most rigid.
Traffic congestions in local cities have been getting worse since 1990s, so many local governments have considered the introduction of an LRT system. So far, there is no city operating the LRT due to social environments, financial reasons, feasibility and so on. But still many cities have examined LRT or started the construction. Until now, more than 30 cities are constructing LRT or planning the introduction of LRT and it becomes 96 routes, approximately 700km. With the support of MLTM, KRRI has developed automatic LRT system with rubber-wheels, K-AGT as a result of "LRT system technology development project" from 1999 to 2005 by investing 50.32 billion wons(the public 37, the private 13.32) and finished running durability test of 100,000km at Kyeong-san test line. Currently, two trains, coupled two cars respectively have running and signaling tested. K-AGT was appointed to supply for an extension line at Busan Subway Line 3(Minam-Anpyeong section) with 17 trains(six-unit car) 102 cars. However, except for Minam-Anpyeong section, other cities such as Uijeongbu, Yongin, Daegu(Line 3) and Kwangmyeong decided to use the foreign systems, not to use the product, a result of national R&D project. This results in a huge waste of foreign currency and it is expected to require much additional cost for maintenance. If local governments use the products of national R&D projects, many national benefits such as reducing imports and protecting home industries could be expected, therefore in this paper, some plans to encourage to use products of national R&D projects were dealt with.
The research was conducted to understand type of iron used by those who lived at dwelling site of Yangsoo-ri in between the first century B.C. and the first century A.D. to make steel products and their technique such as steel making process and heat treatment, based on micro structure information obtained through microscopic metallographic structure analysis with SEM-EDS of six steel productsexhumed at the site. Key findings are summarized as below. In the sense that Si-Ca-Al style and less than 0.5% of Ti were found in the non-metallic inclusion, the material used for forged iron ware was magnetite resolved in that. It is, however, unclear whether magnetite was resolved at high temperature or at low temperature. Microscopic structure analysis revealed that forged steel products were made through repeated hot working, the technique of molding by hitting after heating in the process of resolving and molding iron. As a result, the iron used here for the products was not the iron ore which was produced through resolution from discarded cast iron axe, ingot iron. It is probable that to make those steel products, disposed-of cast iron was reused after being molded by decarburizing. Although a few of relics were analyzed for the research, they were of critical importance in defining the process of ironware production from the first century B.C. and the first century A.D. at the Yangsoo-ri region. Judging from the iron from A-19 dwellingsite, it is possible to conclude that the iron was manufactured from cast iron decarburized and yet more research has to be done into relics yetto be exhumed in order to ascertain the finding. All of these findings are believed to play a critical role in further studies to define the steel-manufacturing technique used on the central Korean peninsular in the ancient times.
The aim of this paper is to show the daylight environment of a light pipe system according to sun movement. A light pipe system has been mounted on the roof of the windowless full scale model: the solar spot has diameter of 0.65m and is 1.3m long, giving an aspect ratio of 1:2. The full scale model was installed on the rooftop of the SHINAN apartment in Yongin city that has no obstructions against sunlight. The test room is equipped with sensors for the measurements of the internal illuminance and has an area of 6m(W)$\times$6m(D)$\times$4m(H). The system has been monitored with a data-logger to evaluate the cumulative distribution of illuminance on a floor-plane from 16th, April to 29th, May, 2008 over one month and selected clear sky condition. For the daylight performance of floor area, the totally 49 measuring points has been used to determine the internal illuminance and an HP datalogger(HP34970A) records the measurements for one consecutive month. The horizontal external illuminance has been measured with two outdoor sensors. This paper presents the results of monitoring light pipe system with internal/external illuminance ratio and cumulative frequency distribution of floor-plane illuminance are discussed The results show that lightpipe is proficient device for introducing daylight into the building. However It provided different daylight indoor environment with wide or narrow Interquatile range of illuminance, internal/external illuminance ratio and cumulative frequency distribution according to solar positions under suuny sky condition. For more achieving the improvement of lightpipes also include energy savings, user visual comfort with various indicators; seasonal solar height, room and lightpipes geometries.
The purpose of the current study was to research scientific basis and necessity of supplementary materials for field lesson out of golf swing teaching methods. As the subject of study, skillful tour pro golfers were chosen to reinterpret field lesson results for driver swing from the viewpoint of kinematics. In addition, through precise analysis, this study developed a case to verify the validity and error of field lesson. As a result, field lesson showed a slight difference among qualitative evaluation of kinematical analysis of techniques, subjects of study, and items. Accordingly, there was a little difference between two methods in view of evaluation of errors that 5 subjects of the study have shown. However, there was a significant difference in compensation to prevent causes of error and errors. Based on instructor's experience most errors could be evaluated. Therefore, feedback for error correction based on instructor's experience showed a significant difference from qualitative evaluation of kinematical analysis of techniques. In conclusion, the following are required for correct golf swing lesson; instant feedback through field lesson and qualitative evaluation of kinematical analysis of techniques to determine fundamental causes correctly.
This study is to examine the manufacturing technique based on scientific investigation and analysis on Steel-Plated Jewel Beetle's Adornment gilt-bronze openwork remains excavated from No. 100 site at Hwango-dong Gyeongju. As a result of the investigation on the manufacturing revealed that riveting was adopted to connect gilt-bronze openwork plates and steel plates, followed by mercury amalgam plating method and carving of the patterns by means of the dotted line engraving technique. There were some traces on the surface of Jewel Beetle wings that show the use of pins for fixing, which seems to be the result of recycling or processing. The sectional analysis shows the high possibilities that varnishing with lacquer was adopted for wing adhesion, and it was confirmed that varnishing with lacquer was used on the strap pendant plate to prevent corrosion.
Yoo, Kyung Tae;Choi, Jung Hyun;Kim, Hee Jung;Lee, Bom;Jung, Jea Wook;Choi, Wan Suk;Yun, Young Dae;Kim, Soon Hee
Journal of International Academy of Physical Therapy Research
/
v.3
no.2
/
pp.469-474
/
2012
The purpose of this study is to analyze the correlation between the stature and the muscle performance ratings and the subjective discomfort rations at performing lower arm's pronation and supination according to change sin the height of working table for more efficient performance at designing a working table and performing a work. For the purpose, this study conducted an experiment targeting 40 people in their 20s, who were classified into 4 groups each group composing 10 people at intervals of 5cm from the standard stature of 166.5cm. The experiment measured the maximum isometric pronation and the supination muscular power, and at measuring the factors, the heights of working tables were set as 800mm, 850mm, and 900mm. From the measurement results, it was found that the stature and the maximum muscular power was correlated. That is, as the experiment groups's average stature is higher, the maximum muscular power was higher. For the correlation between the motion patterns(pronation and supination) and the maximum muscular power, it was seen that the maximum muscular power was higher at performing the pronation than the supination. In the correlation between motion patterns and the subjective discomfort ratings, it was seen that the subjective discomfort rating was higher at performing the supination than the pronation. For the correlation between height adjustment and the subjective discomfort ratings, as the height of working table was lower, the subject discomfort rating was lower. Therefore there was no difference in the maximum muscular power according to the height changes of working table, but it was found that as the working table was higher, the user felt more comfortable.
Kim, Yang Rae;Kim, Jae Ic;Kim, Yong Youn;Kang, Kwon Young;Kim, Bo Kyoung;Park, Joo Hyun;An, Ho Jung;Min, Kyung Ok
Journal of International Academy of Physical Therapy Research
/
v.3
no.2
/
pp.446-452
/
2012
This study aims to examine the effects of taping of the ankle joint on the static and dynamic balance and gait ability of stroke patients. Twenty-six stroke patients receiving physical therapy at a hospital located in Gyeonggi-do were divided equally into a group that had taping in physical therapy and an ordinary physical therapy group. They exercised for 30 minutes each, 3 times per week for 8 weeks from June to August 2011. Romberg's eye open and eye closed tests, limits of stability(LOS), forward and back test, timed up and go test(TUG) and 10-meter gait velocity test were performed to evaluate static balance, dynamic balance, and gait ability, respectively, prior to and 8 weeks after the intervention. Differences within each group in relation to the lapse of time were compared by a paired t-test. Differences between the two groups were compared by an independent t-test. Regarding comparison of differences within each group, all tests resulted in significant changes in both groups after the intervention (p<.05). Comparison of differences between the two groups showed that taping in the physical therapy group had significantly better test results than the ordinary physical therapy group in all measured items(p<.05). The after effects of ankle taping on stroke patients are more efficient and effective than ordinary physical therapy alone in improving balance and gait ability.
This study was conducted to investigate the antibiotic effects of bee venom (Apis mellifera) on the growth performance and blood characteristics in broiler chicken. 1-day-old broiler chicks were randomly divided into 3 groups with 3 replicates of 5,000 birds each. The treatments were control without antibiotic and bee venom, 0.5ppm or 1ppm bee venom. The final body weight and body weight gain were significantly higher in bee venom than control (P<0.05). The feed conversion ratio in all treated groups were significantly improved as compared to that of control (P<0.05). No significant differences among the groups were observed in the contents of total cholesterol, aspartate aminotransferase (AST), alanine aminotransferase (ALT), total protein, albumin and globulin in blood serum. The white blood cell, red blood cell, heterophil, lymphocyte, and stress indicator (heterophil:lymphocyte rate) were not significantly different among the groups. The superoxide dismutase-like activities in the groups that were water containing bee venom were significantly increased compared to those in the control group (P<0.05). It has been suggested that bee venom promotes the growth of broilers without any negative effect when added in broiler water.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.