• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.36-44
• /
• 1983

Farm population was rapidly decreasing due to shift of the people from farm sector to the non-farm sector caused by the economic growth of the country. Especially, a great shortage of farm labor in busy farming period in June and October is becoming a serious problem in maintaining or promoting land productivity. The peak of labor requirement in summer is caused by rice transplanting and barley harvesting. In order to reduce the restrictions imposed on farm management by the concurrence of labor requirement and the lack of labor, the experimental study for mechanization of barley harvesting has been carried out in the fields. 1. The machines for barley harvesting were knap-sack type reapers, windrow reaper (power tiller attachment), binder and combine. The order of higher efficiency of machine for barley harvesting was combine, binder, windrow reaper (WR), knapsack type reaper 1(KSTR1), and knap sack type reaper 2(KSTR2; mist and duster attachment). 2. The ratio of grain loss for the manual, binder, and combine plot was about four percent of total field yield. 3. The total yield of barley in 35 days and 40 days harvesting after heading were 514 kg and 507kg per 10 ares respectively. The yield of 35 days-plot was higher than other experimental plots. 4. The lowest yield was recorded in 30 days-plot due to the large quantity of immatured grains and having lighter 1000-grain weight. The ratio of immatured grains was 2.66 percent and 1000-grain weight was 29.4 grams. 5. The total harvesting cost of the windrow reaper was 10,178 won per 10 ares. It was the lowest value compared to other machines. The next were combine, binder, KSTR1, KSTR2, and manual in sequence. As a result, the optimum time of barley harvesting for mechanization was 35-40 days after heading. Combine, binder, and windrow reaper were recommended as the suitable machines for barley harvesting in the work efficiency. However, in total harvesting cost, the windrow reaper was the most promising machine for barley harvesting.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.20-25
• /
• 1999

This experiment was conducted to elucidate the relation-ship between vertical distribution of rice roots and yield traits under field conditions. Eight IRRI's new plant type rices (NPTRs) were tested in a volcanic ash soil paddy field under dense (IO 10 cm) and common (20 20 cm) planting densities. These lines were evaluated to have more spikelet numbers per panicle (SNP), lower filled grain rate (FGR), and lower rough grain weight per hill (RGWH). In dense planting, rough grain weight per stem (RGWS) was increased due to heavier culm and leaf dry weight (CLDW), and both RGWS and CLDW were related with the percentage of root distribution (%RWI) in the 10~30 cm soil layer, while in common planting, RGWS was not closely related with CLDW. SNP was highly related with root dry weight (RDW) in the 0~10cm soil layer. FGR was mainly affected by ROW in the 10~30 cm soil layer under both planting densities. RGWS was positively correlated with top dry weight (TDW) and harvest index (HI), and TDW was positively correlated with RWI under common planting or %RWI under dense planting, and HI was positively correlated with RWI in the 10~30 cm soil layer only under dense planting. RGWS was closely related with root weight index by dry weight (RWI) in the 10~30 cm soil layer and %RWI in the 0~30 cm or 10~30 cm soil layer under dense planting, and with only RWI in the 10~30 cm soil layer under common planting. But RGWH showed the close positive relationship with RDW and RWI in the 10~30 cm soil layer under dense planting, while under common planting, it showed the close positive relationship with RWI and %RWI in the 10~30 cm soil layer or %RWI in the 0~30 cm soil layer. The deeper root system in rice, especially under dense planting, is important for high yield of NPTRs focusing on the increment of top mass production and harvest index.

• Journal of Ginseng Research
• /
• v.30 no.3
• /
• pp.132-136
• /
• 2006

This study was carried out to study the effect of emergence type of multiple stem and main bud on the quality of fresh and red ginseng in Korean ginseng. To achieve the aim of this study, characteristics of roots and quality factors were investigated. Single stem plants were 62.9% of the total samples, and the remainder(37.1%) were multiple stem plants. The number of stems affected considerably on root weight. Root weight of triple stem type with triple main bud was the largest among the types. As the number of stem per plant increased, the root quality became worse. In both single and multiple stem, the more the number of main buds was, the lower the quality grade was. Yield of the red ginseng was about 30%, showing little difference between single stem and multiple stem plant. As the number of stem increased, yield of Bonsam decreased. The quality grade of red ginseng of single stem was better than that of multiple stem. Multiple stem plant produced relatively more Yangsam and Japsam. As the number of main bud increased, the quality grade of ginseng decreased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.45-78
• /
• 1974

To provide useful information for developing new high yielding soybean varieties and for improving cultural practices, an investigation was made on variation of dry matter production and on relationship among several agronomic characters of soybean plants grown under different planting times and densities as well as under different fertilizer levels, using Kwang-kyo, Dong puk-tae, and Suke ＃ 51 as determinate types and Shelby, SRF-300 and Harosoy as indeterminate types at the Crop Experiment Station during the period of 1972 and 1973. The results obtained were summarized as follow: 1. The dry weight, CGR and LAI at the initial flowering stage were high in the high plant population irrespective of varieties, planting times, and fertilizer levels. However, those characters of the indeterminate type were lower than those of the determinate types. The same characters of the indererminate type at the terminal leaf stage were either same or higher than those of the determinate types. 2. The dry weight of the determinate type at the initial flowering stage was similar to the indeterminate, type, when planting times were May 21 or June 15. The dry weights of both types of varieties were low when planted on July 10. When fertilizer levels were increased, the CGR, dry weight and LAI at the initial flowering stages were also increased. 3. Even though significant differences of LAI were obtained among the varieties within the same plant type, the indeterminate type was in general lower than that of the determinate type regardless of planting time and densities, or fertilizer levels, while the yield of the indeterminate type was comparable to the yield of the determinate type. 4. The high degree of leaf- and petiole-fall at the greenbean stage was highly associated with early planting and high levels of fertilizers. However, less amount of leaf- or petiole-fall was found when planted on July 10 or under low plant population. 5. The percent of stem weight was high under higher plant population, while the percent of leaf weight was high under lower plant population. When planting time was late, the percent of stem and petiole weight were reduced, while the leaf weight was increased. 6. The percent of pod weight of the determinate type at the terminal leaf stage was about 2% when planted on May 21, about 8% when planted on June 15, and about 9% when planted on July 10. The percent of pod weight of the indeterminate type at the terminal leaf stage were about 6 % when planted on May 21, 14% when planted on June 15 and 21% when planted on July 10. 7. Kwang kyo showed less degree of leaf-fall even when lodged due to high levels of fertilizer applied, while SRF-300 showed great damage due to lodging. 8. High yields were obtained when planted on May 21, but there were little yield differences between yields from May 21 and June 15 plantings. The reduction of yield due to late planting of July 10 was less apparent in the determinate type of varieties, while it was high in the indeterminate type. 9. The optimum plant population per are for high yield was 1, 250 to 2, 500 plants when planted on May 21, 2, 500 plants when planted on June 15, and 3, 333 plants when planted on July 10. 10. High correlation coefficients were obtained between dry matter weight and LAI at the terminal leaf stages, and between the dry matter weight and yield at the greenbean stages. The optimum dry weight for high yield in the determinate type was expected to be 25 kg. per are at the initial flowering stage and 50 kg. per are at the terminal leaf stage. In the indeterminate type the LAI and dry weight at the greenbean stage were 4 to 5 and 80 kg. per are, respectively. 11. Under the high plant population plant height was increased, while the stem diameter and the number of nodes and branches were reduced. Consequently, the percent of mainstem to main stem plus branches were increased, and the length of internode was also elongated. The ratios of stem weight, number of nodes and pods, and yield of main stem were increased when high plant population was associated with the early planting. The percent of main stem to branches for the indeterminate type was higher than that of the determinate type. 12. Under the high plant densities and late planting, the percent of the pod number and yields of main stem were increased, indicating that varieties with no or less branches were better adaptable under such conditions. 13. High degree of simple correlation coefficients was obtained between the LAI at the initial flowering stage and terminal leaf stage, and the total node number, dry matter and dry stem weight of both determinate and indeterminate types. Even though no significant correlation was found between the LAI at the initial flowering stage of the determinate type and the stem length and pod number per are, highly significant correlation coefficients were obtained between such characters in the indeterminate type of varieties. 14. The dry matter was positively correlated with the LAI, CGR, stem length, and pod number, node number and dry stem weight per are, while no significant correlation was found between the dry matter and stem diameter. 15. The correlation coefficients between lodging index and the LAI, dry weight, stem length and dry stem weight were highly significant. Negative correlation was obtained for the indeterminate type between the stem diameter and lodging index. The correlation coefficient between the stem diameter and lodging index was non-significant for the determinate type, while positive correlation was obtained between the yield and lodging index in the determinate type. The lodging index was also positively correlated with average length of internode of main stem. 16. The 100 seed weight appeared to be lowered under the high plant population and no fertilizer condition, and when planted late. Apparent differences of 100 seed weight were found between main stem and branches, being higher for the main stem than for the branches. 17. No variation of protein content was found due to different cultural practices. However, the oil content was apparently reduced when planted late.

• KSBB Journal
• /
• v.7 no.1
• /
• pp.9-14
• /
• 1992

A cone type of tower fermentor loaded with flocculating Sacchromyces uvarum was used to study the fermentor performance. The performance of cone type fermentor was compared with those of other fermentors. The maximum yeast concentration in the cone type of tower fermentor was 35.9-43.0g/1.hr and the maximum ethanol productivity was 14.75g/1.hr at the dilution rate 0.26 $hr^{-1}$. The ethanol yield was 0.446-0.472g ETOH/g Glucose. It was concluded that a cone type of tower fermentor might offer better perspectives for continous etanol fermentation.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.504-509
• /
• 2011

In this study, the effect of superplasticizers on the dispersibility and hydration properties of cement with silica fume were investigated. Superplasticizers are used Naphthalene type, Ligno-sulfate type and polycarboxylate type. Compared with plastic viscosity of cement paste without superplasticizers(Plain), plastic viscosity of cement paste with superplasticizers are reduced and yield stress of cement pastes with each superplasticizer is increased rather than Plain. And then, plastic viscosity of cement paste with Naphthalene type superplasticizer was the least of all types. Compared with other two types, setting and hydration of cement paste with Polycarboxylate type(PC) superplasticizer is very fast. At compressive strength after 3-day, PC is higher than other two types, But, compressive strength of after 7-day and 28-day, PC is smaller than other two types.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.367-372
• /
• 1997

Excessive water stress is one of major limiting factors affecting soybean yield, especially when soybean is grown in converted upland from paddy field. The present study was undertaken to know the genotypic variation in yield response of soybean to different environments in combination with soil texture and underground water table depth. Eight recommended soybean varieties in Korea and two supernodulating soybean mutants introduced from USA were planted in the lysimeter which was filled with two different soil types(sandy loam and clay loam). Of three underground water table depths(10, 30, and 50 cm) during whole growth stage, the lowest 10 cm was included to create excessive water stress. Yield was significantly different according to the underground water table depth and soybean genotypes, whereas soil type did not affect yield. There were significant interaction effects of soybean yield among soil type, soybean genotype, and underground water table depth. Yield of nts 1116 showed the highest across environments. Based on the regression analysis, the most stable variety was Sobaeknamulkong(bi=1.09). Jangsukong was fairly stable and high in yield, when compared to other soybean genotypes. However, nts 1116 was the most desirable ($D_i=228$) mainly due to the highest yield rather than the greater stability over environments. Multiple regression analysis revealed that shoot dry weight and nodule number were major factors affecting yield in the combined data over three water table depths and two soil types.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.18
• /
• pp.54-87
• /
• 1975

The effects of various weather factors on yield components of rice, year variation of yield components within regions, and regional differences of yield components within year were investigated at three Crop Experiment Stations O.R.D., Suweon, Iri, Milyang, and at nine provincial Offices of Rural Development for eight years from 1966 to 1973 for the purpose of providing information required in improving cultural practices and predicting the yield level of rice. The experimental results analyzed by standard partial regression analysis are summarized as follows: 1. When rice was grown in ordinary seasonal culture the number of panicles greatly affected rice yield compared to other yield components. However, when rice was seeded in ordinary season and transplanted late, and transplanted in ordinary season in the northern area the ratio of ripening was closely related to the rice yield. 2. The number of panicles showed the greatest year variation when the Jinheung variety was grown in the northern area. The ripening ratio or 1, 000 grain weight also greatly varied due to years. However, the number of spikelets per unit area showed the greatest effects on yield of the Tongil variety. 2. Regional variation of yield components was classified into five groups; 1) Vegetation dependable type (V), 2) Partial vegetation dependable type (P), 3) Medium type (M), 4) Partial ripening dependable type (P.R), and 5) Ripening dependable type (R). In general, the number of kernel of rice in the southern area showed the greatest partial regression coefficient among yield components. However, in the mid-northern part of country the ripening ratio was one of the component!; affecting rice yield most. 4. A multivariate equation was obtained for both normal planting and late planting by log-transforming from the multiplication of each component of four yield components to additive fashion. It revealed that a more accurate yield could be estimated from the above equation in both cases of ordinary seasonal culture and late transplanting. 5. A highly positive correlation coefficient was obtained between the number of tillers from 20 days after transplanting and the number of panicles at each(tillering) stage 20 days after transplanting in normal planting and late planting methods. 6. A close relationship was found between the number of panicles and weather factors 21 to 30 days, after transplanting. 7. The average temperature 31 to 40 days after transplanting was greatly responsible for the maximum number of tillers while the number of duration of sunshine hours per day 11 to 30 days after transplantation was responsible for that character. The effect of water temperature was negligible. 8. No reasonable prediction for number of panicles was calculated from using either number of tillers or climatic factors. The number of panicles could early be estimated formulating a multiple equation using number of tillers 20 days after transplantation and maximum temperature, temperature range and duration of sunshine for the period of 20 days from 20 to 40 days after transplantation. 9. The effects of maximum temperature and day length 25 to 34 days before heading, on kernel number per panicle, were great in the mid-northern area. However, the minimum temperature and day length greatly affected the kernel number per panicle in the southern area. The maximum temperature had a negative relationship with the kernel number per panicle in the southern area. 10. The maximum temperature was highly responsible for an increased ripening ratio. On the other hand, the minimum temperature at pre-heading and early ripening stages showed an adverse effect on ripening ratio. 11. The 1, 000 grain weight was greatly affected by the maximum temperature during pre- or mid-ripening stage and was negatively associated with the minimum temperature over the entire ripening period.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.37-44
• /
• 1985

With a view to producing forest trees and forages, the grassland development in the forest has become an important issue in Korea. For better grassland development in the forest, a field research was carried out to investigate the effects of 3 dominant types of seed mixtures (orchardgrass type, tall fescue type, and reed canarygrass type) on the botanical composition, pasture plants composition and dry matter yield of grass-clover mixtures grown under pine trees (shading level; about 50%). As a preliminary test, 3 shading levels (o; full sunlight, 50, and 60%) were treated to compare the yield of pasture in the forest. This experiment was arranged as a randomized block design with 3 replications, and performed at the experimental field in the suburban forest of Suweon, during 1982 to 1984. The results obtained are summarized as follows: 1. As the shading level increases by 0, 50, and 6075, the dry matter yield of forage was decreased by 100 (11.13 ton/ha),81 and 76%, respectively. 2. The total ground cover and percentage of pasture plants were decreased by year, regardless of 3 different dominant types of pasture mixtures. The wild grasses and shrubs, however, tended to be increased by year. 3. Orchardgrass was found to be the only dominant grass showing 80% of all pasture plants, regardless of 3 types of pasture mixtures. But the percentage of tall fescue, reed canarygrass, Kentucky bluegrass and ladino clover were low. 4. Dry matter yield was rapidly decreased to 5075 in the second harvest year, 1984 compared with that of the first harvest year, 1983. In 1983, the yield of orchardgrass type, tall fescue type, and reed canary-grass type was 8.95, 9.05, and 7.93 ton per ha, respectively, while in 1984, the yield was 4.66, 4.57, and 4.38 ton per ha, respectively. 5. From the above results, it is suggested that tile orchardgrass dominant type of pasture mixtures is the most desirable considering forage production and botanical composition, and maintaining productivity for several years is important in the grassland under the trees.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.556-566
• /
• 2014

In this study, we collected 29 Kenaf (Hibiscus cannabinus L.) genetic resources from 10 countries to confirm the possibility of the introduction into Korea. The Kenaf (Hibiscus cannabinus L.) has the broad industrial use like feed and the 5 times more strong $CO_2$ absorption capacity compared to general plant. So recently it is considered as a good industrial source. We analyzed ecotype, growth and development, yield and feed value of collected resources. They were divided into 3 groups depending on flowering time, early maturing type blooming in early July, mid-late maturing type blooming from end of August to early September and late maturing type blooming in end of October. Early maturing type could get fruitful seed but dropped yield (average 7,895 kg/10a) and late maturing type could get high yield (average 12,572 kg/10a) but deletion. The other side mid-late maturing type could get yield over a certain level (average 11,207 kg/10a) and fruitful seed was ensured. The yields analyzed by resources indicated that K12 (Hongma 300) collected in China, K25 from India, K22 from Russia and K21 (Khonkaen 60) variety from China were more than 13,500 kg per 10a. Feed value of early maturing type had inclined to more better than other types, but like dry digestible matter (DDM) and dry matter intake (DMI) of some late maturing types like K12, K21, K22 which had a high yielding ability were more better than that of early maturing types'. So relative feed value (RFV) which considered comprehensive item for feed value were indicated K21 was 102.5, K12 was 116.2 and K22 was 120.2. 'Jangdae' the variety developed in Korea which could complement of other types' had a good quality for yield 10,975 kg/10a and 12.5% crude protein content and 101.9 of the relative feed value. So we need to be taken power to collection of mid-late maturing types resources.