• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.273-280
• /
• 2014

The spectrum weighted responses of various detectors were calculated to provide guidance on the proper selection and use of survey instruments on the basis of their energy response characteristics on the neutron fields. To yield the spectrum weighted response, the detector response functions of 17 neutron-measuring devices were numerically folded with each of the produced calibration neutron spectra through the in-house developed software 'K-SWR'. The detectors' response functions were taken from the IAEA Technical Reports Series No. 403 (TRS-403). The reference neutron fields of 21 kinds with 2 spectra groups with different proportions of thermal and fast neutrons have been produced using neutrons from the $^{241}Am$-Be sources held in a graphite pile, a bare $^{241}Am$-Be source, and a DT neutron generator. Fluence-average energy ($E_{ave}$) varied from 3.8 MeV to 16.9 MeV, and the ambient-dose-equivalent rate [$H^*(10)/h$] varied from 0.99 to 16.5 mSv/h.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.143-151
• /
• 2005

In this study, it is demonstrated that how the effect of the Near Fault Ground Motion affects the response of the structure. Considering the general characteristic of Near Fault Ground Motion the characteristics of Near Fault Ground Motions is analysed by elastic response spectrums, and the inelastic response spectrum is evaluated with the ductility and the yield strength to consider the inelastic behavior which couldn't be simulated through the elastic response spectrum. The result of this study shows that the effect of Near Fault Ground Motion should be considered in the long period range of long span structures but the domestic seismic design code was developed based on Far Fault Ground Motions, so the effects of Near Fault Ground Motions, which is very serious especially in large structures with a long period, are not considered. Therefore, the effect of the Near Fault Ground Motion has to be examined especially in the seismic performance evaluation of long period structure.

• Earthquakes and Structures
• /
• v.22 no.6
• /
• pp.585-595
• /
• 2022

Using the nonlinear static procedures has become very common in seismic codes to achieve the nonlinear response of the structure during an earthquake. The capacity spectrum method (CSM) adopted in ATC-40 is considered as one of the most known and useful procedures. For this procedure the seismic demand can be approximated from the maximum deformation of an equivalent linear elastic Single-Degree-of-Freedom system (SDOF) that has an equivalent damping ratio and period by using an iterative procedure. Data from the results of this procedure are plotted in acceleration- displacement response spectrum (ADRS) format. Different improvements have been made in order to have more accurate results compared to the Non Linear Time History Analysis (NL-THA). A new procedure is presented in this paper where the iteration process shall not be required. This will be done by estimation the ductility demand response spectrum (DDRS) and the corresponding effective damping of the bilinear system based on a new parameter of control, called normalized yield strength coefficient (η), while retaining the attraction of graphical implementation of the improved procedure of the FEMA-440. The proposed procedure accuracy should be verified with the NL-THA analysis results as a first implementation. The comparison shows that the new procedure provided a good estimation of the nonlinear response of the structure compared with those obtained when using the NL-THA analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.273-284
• /
• 2006

In this study, After considering the general characteristic of Near Fault Ground Motion, the inelastic response spectrum is made to evaluate using the change of ductility and yield stiffness coefficient according to the inelastic behavior of structures which couldn't be examined through the elastic response spectrum. It is conducted to the elastic and inelastic time history analysis about the long period structure which could reflect the characteristic of Near Fault Ground Motion with the best and it is also examined the aspect of response distribution about the input data. Moreover, the response characteristic of structure is analyzed by investigating the plastic hinge for the purpose of grasp about the inelastic behavior of structure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.221-237
• /
• 2005

For developing the site-specific fertilizer management strategies of crop, it is essential to know the spatial variability of soil factors and to assess their influence on the variability of crop growth and yield. In 2002 and 2003 cropping seasons within-field spatial variability of rice growth and yield was examined in relation to spatial variation of soil properties in the· two paddy fields having each area of ca. $6,600m^2$ in Suwon, Korea. The fields were managed without fertilizer or with uniform application of N, P, and K fertilizer under direct-seeded and transplanted rice. Stable soil properties such as content of clay (Clay), total nitrogen (TN), organic mater (OM), silica (Si), cation exchange capacity (CEC), and rice growth and yield were measured in each grid of $10\times10m$. The two fields showed quite similar spatial variation in soil properties, showing the smallest coefficient of variation (CV) in Clay $(7.6\%)$ and the largest in Si $(21.4\%)$. The CV of plant growth parameters measured at panicle initiation (PIS) and heading stage (HD) ranged from 6 to $38\%$, and that of rice yield ranged from 11 to $21\%$. CEC, OM, TN, and available Si showed significant correlations with rice growth and yield. Multiple linear regression model with stepwise procedure selected independent variables of N fertilizer level, climate condition and soil properties, explaining as much as $76\%$ of yield variability, of which $21.6\%$ is ascribed to soil properties. Among the soil properties, the most important soil factors causing yield spatial variability was OM, followed by Si, TN, and CEC. Boundary line response of rice yield to soil properties was represented well by Mitcherich equation (negative exponential equation) that was used to quantify the influence of soil properties on rice yield, and then the Law of the Minimum was used to identify the soil limiting factor for each grid. This boundary line approach using five stable soil properties as limiting factor explained an average of about $50\%$ of the spatial yield variability. Although the determination coefficient was not very high, an advantage of the method was that it identified clearly which soil parameter was yield limiting factor and where it was distributed in the field.

• Journal of Hydrogen and New Energy
• /
• v.22 no.3
• /
• pp.326-332
• /
• 2011

The authors examined the effects of operating parameters on the $H_2$ production by dark fermentation of the wastewater generated from food waste recycling facilities, in short "food waste wastewater (FWW)". Central composite design based response surface methodology was applied to analyze the effect of initial pH (5.5-8.5) and substrate concentration (2-20 g Carbo. COD/L) on $H_2$ production. The experiment was conducted under mesophilic ($35^{\circ}C$) condition and a heat-treated ($90^{\circ}C$ for 20min)anaerobic digester sludge was used as a seeding source. Although there was a little difference in carbohydrate removal, $H_2$ yield was largely affected by the experimental conditions, from 0.38 to 1.77 mol $H_2$/mol $hexose_{added}$. By applying regression analysis, $H_2$ yield was well fitted based on the coded value to a second order polynomial equation (p = 0.0243): Y = $1.78-0.17X_1+0.30X_2+0.37X_1X_2-0.29X_1{^2}-0.35X_2{^2}$, where $X_1$, $X_2$, and Y are pH, substrate concentration (g Carbo. COD/L), and hydrogen yield (mol $H_2$/mol $hexose_{added}$), respectively. The 2-D response surface clearly showed a high inter-dependency between initial pH and substrate concentration, and the role of these two factors was to control the pH during fermentation. According to the statistical optimization, the optimum condition of initial pH and substrate concentration were 7.0 and 13.4 g Carbo. COD/L, respectively, under which predicted $H_2$ yield was 1.84 mol $H_2$/mol $hexose_{added}$. Microbial analysis using 16S rRNA PCR-DGGE showed that $Clostridium$ sp. such as $Clostridium$ $perfringens$, $Clostridium$ $sticklandii$, and $Clostridium$ $bifermentans$ were main $H_2$-producers.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.337-337
• /
• 2017

Accurate and optimal water supply to cereal crop is critical in growing stalks and producing maximum yields. Excessive soil moisture may cause nutrient deficiencies and oxygen deficiency. Excessive soil water during crop growth stages results in decrease of yields. In Korea, the largest agricultural lands are paddy fields. Recently, upland crops are cultivated in paddy field soils to reduce overproduced rice in Korea. In order to success this policy, it is necessary to fully understand crop response to excessive soil moisture condition from paddy field soils. Adzuki bean is one of major legumes which provide protein in daily diet. Adzuki bean has been well know its weakness to excessive soil moisture condition, In order to obtain optimal yields of adzuki bean from paddy field cultivation, it is necessary to understand response of adzuki bean under different soil moisture conditions. This study investigated characteristics of growths, yields and response degree of water stress from adzuki bean. Three cultivars were selected for this study; Chungju, Hongeon, and Arari. All adzuki beans were cultivated in a paddy field which was divided into three sections with different soil moistures. The paddy field was located in Milyang, Gyeongsangnam during 2016. One section of the paddy field had the greatest average soil moisture content as 35.1% during adzuki bean cultivation (very poor). The second greatest soil moisture section had 32.6% (somewhat poor) and the smallest soil moisture section had 28.9% of soil moisture (somewhat well). During cultivation of three cultivar adzuki beans, soil moisture contents and groundwater levels were monitored. All the characteristics of growth and yield components were measured; height, thickness, 100 seed weights etc. Stress index values were calculated by Stress Day Index (SDI). All cultivars had the greatest yields from somewhat well section. Chungju had the greatest yields throughout all three sections compared to other cultivars. Chungju had 81% greater yield than Hongeon which had the smallest yield from somewhat well section. Arari set in middle from all sections. However there was no significant differences yields from very poor and somewhat poor sections. Leaf SPAD values tended to decrease and stable carbon isotope values increased as soil moisture increased. However, Chungju had no difference across different soil moistures in SPAD and stable carbon isotope values, while Hongeon had the greatest differences across sections. These trends followed by SDI values. Chungju had the smallest SDI values compared to other cultivars, which meant that Chungju was the strongest tolerance against excessive soil moisture than other cultivars. All three cultivars showed severe decrease of yields from very poor and somewhat poor sections. Arari and Hongeon showed great decrease from somewhat well section compared to yields from upland soil. These two cultivars may not be proper cultivating in paddy fields. In conclusion, adzuki bean is very sensitive to soil moisture condition and detailed soil managements are required to obtain optimal yields of adzuki bean from paddy field cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.386-393
• /
• 1984

This study was carried out to identify the ecological characters easily changeable with the conditions of temperature and day-length and to ascertain the managable means which can optimize the barley plants to secure the maximae yield and early heading under controlled condition. Yield and yield components were greatly varied with temperature. Especially, effective tiller formation and grain filling of sub-tillers were more favorably affected by thermal treatment than those of main tiller. In thermic response, 'Kangbori' was less susceptible than others, while 'Sacheon #6' showed particular susceptability. The varietal differences of photoperiodic response were recognized on all investigated traits and their degree of response were similar to those with temperature. Among varieties, 'Kangbori' was comparably sensitive on several characters while 'Sacheon #6' displaying low light-sensitivity. The turning point at which heading might be radically stimulated was estimated as about 10.5 hour day-length in 3 tested varieties and above 18 hours of irradiance was considered ineffective for more rapid heading. The condition under which barley varieties may obtain maximal yield and resonably early heading was 15$^{\circ}C$ in temperature and 12 to 15 hours of day-length, regardless of varieties. of day-length, regardless of varieties.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.79-87
• /
• 2017

This study was carried out to extract ginsenosides in by-products from honeyed red ginseng. Response surface methodology (RSM) was used to optimize the extraction conditions. Based on D-optimal design, independent variables were ethanol (extraction solvent) concentration (30-90%, v/v), extraction temperature ($25-70^{\circ}C$), and extraction time (5-11 h). Extraction yield (Y1) and total ginsenosides (Y2) in the extract were analyzed as dependent variables. Results found that extraction yield increased with increasing extraction temperature and time, whereas it was decreased with increasing ethanol concentration. Similar trends were found for the content of ginsenosides in the extracts, except for ethanol concentration, which was increased with increasing ethanol concentration. Regression equations derived from RSM were suggested to coincide well with the results from the experiments. The optimal extraction conditions for extraction yield and total ginsenosides were an extraction temperature of $56.94^{\circ}C$, ethanol concentration of 57.90%, and extraction time of 11 h. Under these conditions, extraction yield and total ginsenoside contents were predicted to be 84.52% and 9.54 mg/g, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.319-331
• /
• 2019

This study was conducted to find a solvent, a extraction method and optimized conditions for Artemisia iwayomogi extract. which is effective to anti-inflammatory and antioxidant activity. A. iwayomogi extract by distilled water, ethanol, methanol, hexane and ethyl acetate using ultrasonic, high-pressure and supercritical extraction was investigated for NO inhibitory and DPPH radical scavenging activity. Extract obtained by ethanol and ultrasonic extraction method showed high NO production inhibitory activity, DPPH free radical scavenging activity and yield. Response surface methodology (RSM) was applied to find a optimized ultrasonic extraction conditions. Results showed that the optimum conditions for the higher yield were ethanol solvent of 45.71% concentration with extraction time and ultrasonic power of 63.33min and 308.84 W, respectively. This condition predicted 15.85% yield, but real yield was $16.40{\pm}0.28%$. The optimum conditions for simultaneous anti-inflammatory and antioxidant activity were established as ethanol concentration (80.81%), extraction time (90.00 min) and ultrasonic power (400.00 W). NO production inhibitory and antioxidant activity were $89.77{\pm}1.37%$ and $60.12{\pm}0.39%$, respectively. These results showed similar to the predicted values of 94.54%, 58.03% respectively.