• The Microorganisms and Industry
• /
• v.15 no.1
• /
• pp.38-42
• /
• 1989

Industrial strain Improvement is concerned with developing or modifying microorga-nisms used In production of commercially important fermentation products. The aim is to reduce the production cost by improving productivity of a strain and manipulating specific cilarafteristic such as the ability to utilize cheaper raw materials or resist bacteriophages. The traditional empiri-cal approach to strain improvement is mutation combined with selection and breeding techniques. It is still used by us to improve the productivity of organisms in amino acids. organic acids andenzymes production. The breeding of high L-lysine-producing strain Au112 is one of the outstanding examples of this approach. It is it homoserine auxotroph with AEC, TA double metabolicanalogue resistant markers. The yield reaches 100g/1. Resides, the citric acid-producing organism Aspergillus nuger, Co827, its productivity reches the advanced level in the world, is also the result of a series mutations expecially with Co Y-radiation. The thermostable a-amylaseroducing strain A 4041 is the third example. By combining physical and chemical multations. the strain ,A 4041becomes an asporogenous, catabolite derepressed mutant with rifamycin resistant and methionine, arginine auxotroph markers. The a-amylase activity reaches 200 units/ml. The fourth successful example of mutation in strain improvement is the glucoamylase-producing strain Aspergillus nigerSP56 its enzyme activity is 20,000 units/ml, 4 times of that of the parental strain UV_11. Recently recombinant DNA approach Provides a worth while alternative strategy to Industrial strain improve-ment. This technique had been used by us to increase the thermostable a-amylase production and on some genetic researches.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.169-175
• /
• 2001

A synthetic juvenoid, R394 (Ethyl 9-cyclohexyl-3, 7-dimethyl-2, 4-nonadienoate) which is known to be a strong pest control agent was administered to silkworm, Bombyx mori L. in minute quantity for improving the silk yield. Based on the result of an earlier preliminary screening, three concentrations of the compound, viz., 0.1563, 0.3125, 31.25 nl/ml were prepared in the form of an emulsion and administered topically as a single dose, to separate batches of $5^{th}$ instar silkworm at 24, 48, 72 and 96 hrs to determine the required concentration and critical time of application for an economically favourable response. Two popular commercial silkworm hybrids, PM ${\times}$ NB4D2 (multivoltine${\times}$bivoltine) and KA${\times}$NB4D2 (bivoltine$\times$bivoltine) were subjected to the experiment. The medium and absolute control were maintained in parallel to compare the results. The results showed that 0.3125 nl/ml was the best concentration of the compound and 72 hrs of $5^{th}$instar was the most favourable age for its administration to get the maximum improvement in the commercial traits. The possible role of exogenous juvenoids in eliciting favourable response in silkworm which ultimately leads to improvement in the commercial traits is discussed.

• Journal of Forest and Environmental Science
• /
• v.38 no.1
• /
• pp.12-20
• /
• 2022

Pongamia (Pongamia pinnata L.) as a source of non-edible oil, is potential tree species for biodiesel production. For several reasons, both technical and economical, the potential of P. pinnata is far from being realized. The exploitation of genetic diversity for crop improvement has been the major driving force for the exploration and ex situ/in situ conservation of plant genetic resources. However, P. pinnata improvement for high oil and seed production is not achieved because of unsystematic way of tree improvement. Performance of P. pinnata planted by Karnataka Forest Department was assessed based on yield potential by collecting 157 clones out of 264 clones established by Karnataka Forest Department research wing under different research circles/ranges. It was evident that the all the seed and pod traits were significantly different. Further, selection of superior germplasm based on oil and pod/seed parameters was achieved by application of Mahalanobis statistics and Tocher's technique. On the basis of D² values for all possible 253 pairs of populations the 157 genotypes were grouped into 28 clusters. The clustering pattern showed that geographical diversity is not necessarily related to genetic diversity. Cluster means indicated a wide range of variation for all the pod and seed traits. The best cluster having total oil content of more than 34.9% with 100 seed weight of above 125 g viz. Cluster I, II, III, IX, XV, XIX, XXI, XXIII, XXVI and XXVII were selected for clonal propagation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.4
• /
• pp.625-634
• /
• 2003

Oil palm fronds (OPF) are one of the main by-products of the oil palm industry in Malaysia. It contains about 38.5 % crude fibre with ME values of about 5.65 MJ/kg dry matter. OPF has great potential to be utilized as a roughage source or as a component in a complete feed for ruminant animals. This paper briefly reviews the availability of OPF in Malaysia and its importance in the local beef and dairy industry. About 26 million metric tonnes of OPF are produced on dry matter basis annually during pruning and replanting operations in the plantations. The nutritive value of OPF and studies to improve its feeding value is highlighted. The optimum level of inclusion for ruminant feeding is 30 % and improvement to intake and digestibility can be further enhanced with addition of other oil-palm by-products. Performances of beef and dairy cattle fed fresh OPF or as silage, pellets and cubes are shown. Good quality OPF silage can be produced without using any additive and the significant improvement on the rate of growth and milk yield were shown. With good formulations, OPF based diets can allow live weight gains of between 600-850 g/day and for local crossbred dairy animals, milk yield of about 11.1 to 20.3 liter/day can be obtained. Pellet based on ground OPF seemed to be less well utilized for ruminant feeding due to its smaller particle size. OPF based cubes which have longer particle size is more suitable for beef and dairy cattle. Long-term feeding of OPF based feeds have been shown to produce good quality carcasses, and the meat is safe for consumption.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.71-79
• /
• 1999

In this paper, high concentration.yield trulti-discharge type ozonizer( MDO ) of new discharge type using superposed silent discharge was designed and manufactured MDO can be consisted with 3 kind of superposed silent discharge type ozmizer( SDO ) in accordance with power supply method that suwlying power, which has $180[^{\circ}]$ phase difference, to 3 electrodes and amble gap. At the rroment, discharge characteristics and ozone generation characteristics of each SDO were investigated in accordance with quantity of suwlied gas, the number of SDO, and the shapes of each SDO. In result, ozone generatioo characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185[ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confinred that MDO could be used as water environment improvement facility.cility.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.1
• /
• pp.187-192
• /
• 2009

Silk filament progression study applying backcross breeding with recipient parent Jata and donor parent Daba ecoraces of tropical tasar silkworm, Antheraea mylitta Drury conducted during 2006 to 2008, revealed introgression of filament denier (10.2 d) superior to both parents at BC4 level. Also, the silk waste (0.35%) and filament breaks (2.6 nos) were reduced compared to both parents, while the filament length (973 m) and non break filament (296 m) improved over donor and could attain closer to recipient parent. The best performance of Jata $\times$ Daba at F1 level, with highest silk filament length (1646 m) of 12.5 d denier, denotes heterosis impact on silk trait with parental heterogenousity, an advantage to exploit silk filament yield. The progression of quality in terms of finer filament denier, less silk waste and least number of filament breaks over both parents and improvement in filament length and non break filament over donor parent except for a marginal shortage against recipient at BC4 level indicates the prospects of Jata and Daba ecoraces as source of breeding material for qualitative improvement of tasar silk filament. The study suggests that the commercially important finer denier of tasar silk filament can be attained with minor reduction in silk yield of wild Jata ecorace by adopting repeated backcrossing for four generations with semi domesticated Daba ecorace.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.580-597
• /
• 2013

Three materials SUS304, 9% Ni steel and Al 5083-O alloy, which are considered possible candidate for International Maritime Organization (IMO) type B Cargo Containment System, were studied. Monotonic tensile, fatigue, fatigue crack growth rate and Crack Tip Opening Displacement tests were carried out at room, intermediate low ($-100^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures. The initial yield and tensile strengths of all materials tended to increase with decreasing temperature, whereas the change in elastic modulus was not as remarkable. The largest and smallest improvement ratio of the initial yield strengths due to a temperature reduction were observed in the SUS304 and Al 5083-O alloy, respectively. The fatigue strengths of the three materials increased with decreasing temperature. The largest increase in fatigue strength was observed in the Al 5083-O alloy, whereas the 9% Ni steel sample showed the smallest increase. In the fatigue crack growth rate test, SUS304 and Al 5083-O alloy showed a decrease in the crack propagation rate, due to decrease in temperature, but no visible improvement in da/dN was observed in the case of 9% Ni steel. In the Crack Tip Opening Displacement (CTOD) test, CTOD values were converted to critical crack length for the comparison with different thickness specimens. The critical crack length tended to decrease in the case of SUS304 and increase for the Al 5083-O alloy with decreasing temperature. In case of 9% Ni steel, change of critical crack length was not observed due to temperature decrease. In addition, the changing material properties according to the temperature of the LNG tank were analyzed according to the international code for the construction and equipment of ships carrying liquefied gases in bulk (IGC code) and the rules of classifications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1626-1631
• /
• 2010

An experiment was conducted to evaluate the effect of dietary replacement of normal maize (NM) with quality protein maize (QPM) on performance, immune response and carcass characteristics of broiler (Krishibro) chickens. Six experimental diets were prepared separately for starter and finisher phases. Diet 1 was a control diet formulated with NM and soybean meal. In diets 2-5, the NM was replaced with QPM at 25, 50, 75 and 100%, respectively. Diet 6 was the same as the control diet, but supplemented with synthetic lysine similar to the industry standard. Each test diet was fed to 8 replicates, each of 5 chicks, reared in stainless steel battery brooders. The AME content of QPM (3382 kcal/kg) was similar to that of NM (3,352 kcal/kg), but protein (9.91 vs. 8.94%), lysine (0.40 vs. 0.26%) and tryptophan (0.09 vs. 0.07%) contents of QPM were higher than NM. Dietary replacement of NM with 50% QPM significantly (p<0.05) improved body weight gain, feed conversion ratio, humoral immune response, relative bursa weight, and breast muscle yield and lowered abdominal fat content. No further improvement in these parameters was recorded by increasing the level of replacement of NM with QPM to either 75% or 100%. Further, the improvement noticed in the 50% QPM group was similar to the group fed the NM diet with lysine supplementation, and thus dietary replacement of NM with QPM at 50% did not need extra synthetic lysine supplementation. It is concluded that dietary replacement of NM with QPM at the 50% level resulted in optimum performance, higher breast muscle yield and higher immune response in broiler chickens.

• Journal of Korea Foundry Society
• /
• v.36 no.1
• /
• pp.1-9
• /
• 2016

Improvement of the mechanical properties of a commercial aluminium casting alloy, A356, was achieved through an optimised combination of alloying elements, modification, and heat treatment. 0.7 wt.% Cu and an additional 0.2 wt.% Mg were added to an Al-7Si-0.35Mg alloy for strengthening at both room and elevated temperatures, whilst a subsequent decrease in the ductility was compensated for by the modification of eutectic Si by Sr addition at a level of up to 110 ppm. It was found that the dissolution of Cu-rich or Mg-rich phases could be maximised by solid-solutionising an alloy with 40 ppm Sr at $530^{\circ}C$, increasing the tensile and yield strengths to 350 MPa and 297 MPa, respectively, with a reasonably high strain of 5% after peak-aging at $210^{\circ}C$. Further addition of Sr up to 110 ppm is, however, more likely to interfere with the dissolution of the Cu-rich or Mg-rich phases during solid solution treatment, resulting in a slight decrease in both tensile and yield strengths at room temperature. Besides the Cu addition, such undissolved phases, on the other hand, may contribute to elevated temperature strength at $200^{\circ}C$.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.4
• /
• pp.63-73
• /
• 2020

The area of paddy fields for upland crop cultivation is gradually increasing. In this context, we developed a chain type mole drainer that can be attached to a tractor to prevent the wet injury of crops. To conduct a field test, we formed underdrains at 2 m intervals in a paddy field wherein soybeans are cultivated, and we investigated the status of the soil moisture, groundwater level, and soybean growth during the cultivation period. The soil moisture content decreased by 22.3~26.8% in the test plot and by 5.9~6.9% in the control plot during a period of 57~88 hour after a rainfall of 41.5~157.0 mm. The effect of underdrainage was clear as the hourly groundwater level decreased approximately 2.8 times faster in the test plot compared with the control plot. Moreover, the soybean yield was greater by 78.6 kg/10a in the test plot than in the control plot. Therefore, for soybean cultivation in paddy fields, the use of the developed mole drainer is expected to help in improving the drainage and increasing the soybean yield.