• Asian-Australasian Journal of Animal Sciences
• /
• 제16권7호
• /
• pp.1049-1054
• /
• 2003

A group of Hanwoo (Korean cattle) steers (n=14,386) was sampled from a commercial abattoir located in Seoul over one year period (spring, summer, autumn and winter) and their carcass traits were collected. Carcass traits assessed by an official meat grader comprised degree of marbling, meat color, fat color, texture and maturity for quality grade, and back fat thickness, ribeye area and carcass weight for yield grade. A heavier carcass with a higher marbling score, more red meat color and white fat color received better quality grade (p<0.05). Regression analysis showed that the marbling score was the strongest attribute (partial $R^2=0.88$) for quality grade. Lighter carcasses with a thinner back fat and larger ribeye area received higher yield grade score. The back fat thickness was the most negative determinant of yield grade (Partial $R^2=-0.66$). The slaughter season had a little effect on quality and yield grades. As slaughter weight increased, back fat thickness and ribeye area increased linearly, whereas marbling score reached its asymptotic level at approximately 570 kg. As a consequence, quality grade showed a considerable improvement up to 570 kg, but increases in slaughter weight afterward showed a little benefit on quality grade. There was a clear curvilinear relationship between slaughter weight and yield grade in that the yield grade reached its highest point at approximately 490 kg and decreased afterward. These results suggested that 570kg at the age of 24 months might be the economic slaughter weight for quality grade but 490 kg for yield grade.

• Journal of Animal Science and Technology
• /
• 제64권1호
• /
• pp.143-154
• /
• 2022

This study was conducted to evaluate the relationship among market weight, slaughter age, yield grade, and primal cut yield in Hanwoo. A total of 403 Hanwoo (Korean native cattle) was assessed for carcass traits such as carcass cold weight, backfat thickness, ribeye area, dressing percentage, yield index, and marbling score. The production yield of the individual major primal cuts of Hanwoo beef was also measured. Carcass cold weight, ribeye area, and backfat thickness, which affect meat quality increased with increased market weight (p < 0.05). The production yield of the ten major primal cuts also increased with increased market weight (p < 0.05). In terms of slaughter age, carcass cold weight, ribeye area, and backfat thickness all increased from 25 months to 28-29 months, and the production yield of all prime cuts also increased with increasing slaughter age. According to the meat yield grade, carcass cold weight and backfat thickness increased from grade A to grade C, although the ribeye area was not affected. The combined findings of the study suggest that slaughtering Hanwoo at the weight of 651-700 kg and 701-750 and age of 28.23 and 29.83 months could be desirable to achieve the best quality and quantity grade of Hanwoo beef. However, the positive correlation of carcass cold weight and backfat thickness, and the negative correlation of the yield index according to primal cuts yield indicated that it is necessary to couple the slaughtering management of cattle with improved genetic and breeding method of Hanwoo to increase the production yield of the major prime cuts of Hanwoo beef.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권4호
• /
• pp.591-595
• /
• 2002

Three hundred thirty five progeny testing steers of Korean beef cattle were evaluated ultrasonically for back fat thickness (BFT), longissimus muscle area (LMA) and intramuscular fat (IF) before slaughter. Class measurements associated with the Korean yield grade and quality grade were also obtained. Residual standard deviation between ultrasonic estimates and carcass measurements of BFT, LMA were 1.49 mm and $0.96cm^2$. The linear correlation coefficients (p<0.01) between ultrasonic estimates and carcass measurements of BFT, LMA and IF were 0.75, 0.57 and 0.67, respectively. Results for improving predictions of yield grade by four methods-the Korean yield grade index equation, fat depth alone, regression and decision tree methods were 75.4%, 79.6%, 64.3% and 81.4%, respectively. We conclude that the decision tree method can easily predict yield grade and is also useful for increasing prediction accuracy rate.

• 한국축산식품학회지
• /
• 제33권3호
• /
• pp.305-316
• /
• 2013

The strategy for increasing the palatability of Hanwoo beef through fattening could lead to a decline in yield grade. The aim of this study was to examine the meat quality traits of Longissimus dorsi (LD) muscle from carcasses of Hanwoo steers at different yield grades. A total of 246 Hanwoo steers was divided into the following yield grades: A (n=77), B (n=76) and C (n=93). Meat quality traits, including proximate composition, cholesterol content, nucleotide content, dipeptide content, creatine and creatinine, free amino acid content, fatty acid composition, instrumental meat color, pH, water holding capacity, drip loss, cooking loss, and sensory qualities of the LD muscle from the 3 yield grades of Hanwoo carcasses were measured. The decline in yield grade from A to C resulted in an increase in crude fat and cholesterol content as well as a decrease in inosine 5'-monophosphate and aspartic acid in the LD muscle (p<0.05). In terms of fatty acid composition, the LD muscle from yield grade A had higher SFA and PUFA and lower MUFA content than that from yield grade C (p<0.05). However, the ratio of PUFA/SFA and n-6/n-3 did not differ among LD muscles from the 3 yield grades. There were no significant differences among other meat quality traits in relation to the yield grade. In conclusion, we suggest that the changes of substances related with health and flavor can be considered in order to obtain better quality Hanwoo beef.

• 한국수정란이식학회지
• /
• 제23권4호
• /
• pp.291-298
• /
• 2008

We separately cultured follicular oocytes collected from individual ovaries of slaughtered Korean native cows and examined both the embryonic development rate and pregnancy rate after embryo transplantation according to the meat yield and quality grades of the source beef carcass. Oocytes from meat yield grade B cows exhibited a higher fertilization rate and embryonic developmental rate to the eight-cell stage than oocytes from grade A or C animals (p<0.05), but there was no significant difference in rate of development to the blastocyst stage among meat yield grades A, Band C. The oocyte cleavage rate and development rate to the eight-cell stage from meat quality grade 3 cattle was higher than grades 1++, 1+, 1 and 2 (p<0.05). Embryos derived from grade animals displayed a development rate to the blastocyst stage of 19.4%, which was also higher than all other meat quality grades (p<0.05). Transplantation of in vitro-cultured oocytes from meat yield grade A ovaries led to a higher pregnancy rate (64.2%) than in vitro-cultured oocytes from meat yield grade B ovaries (56.5%), but there was no significant difference between the two groups in pregnancy or abortion rates. In conclusion, embryonic development rate and pregnancy rate has a close relation to meat quality grades of the source beef carcass, this results is to give information for the Korean native cows improvement of breed.

• Journal of Animal Science and Technology
• /
• 제45권2호
• /
• pp.327-334
• /
• 2003

본 시험은 초음파를 이용하여 한우의 도체형질을 조기에 예측하기 위하여 거세한우 66두를 대상으로 18, 21 및 24개월령에 도체형질을 측정하고, 중회귀 분석 및 의사결정나무 분석을 이용하여 24개월령 출하시 도체형질을 예측하였다. 그 결과를 요약하면 다음과 같다. 도체육량등급에 따라 군을 분류하고 성장에 따른 도체형질의 변화를 관찰한 결과, 등지방 두께는 전기간에 걸쳐 각 도체육량등급간에 유의적(p<0.05)인 차이를 보이며 A, B, C등급 순으로 얇게 나타났다. 중회귀 분석에 의한 도체육량등급의 예측율은 18, 21 및 24개월령에서 각각 78.8%, 86.4% 및 90.9%를 나타냈으며, 의사결정나무 분석에 의한 도체육량등급 예측율은 각 개월령에 따라 78.8%, 89.4% 및 89.4%를 나타냈다.

• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.388-395
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the resistance to deformation under static overloading by measuring yield and fracture strength, and to analyze the failure characteristics of implant assemblies made of different titanium grades and connections. MATERIALS AND METHODS. Six groups of implant assemblies were fabricated according to ISO 14801 (n=10). These consisted of the combinations of 3 platform connections (external, internal, and morse tapered) and 2 materials (titanium grade 2 and titanium grade 4). Yield strength and fracture strength were evaluated with a computer-controlled Universal Testing Machine, and failed implant assemblies were classified and analyzed by optical microscopy. The data were analyzed using the One-way analysis of variance (ANOVA) and Student's t-test with the level of significance at P=.05. RESULTS. The group $IT4_S$ had the significantly highest values and group IT2 the lowest, for both yield strength and fracture strength. Groups $IT4_N$ and ET4 had similar yield and fracture strengths despite having different connection designs. Group MT2 and group IT2 had significant differences in yield and fracture strength although they were made by the same material as titanium grade 2. The implant system of the similar fixture-abutment interfaces and the same materials showed the similar characteristics of deformation. CONCLUSION. A longer internal connection and titanium grade 4 of the implant system is advantageous for static overloading condition. However, it is not only the connection design that affects the stability. The strength of the titanium grade as material is also important since it affects the implant stability. When using the implant system made of titanium grade 2, a larger diameter fixture should be selected in order to provide enough strength to withstand overloading.

• Journal of Animal Science and Technology
• /
• 제45권1호
• /
• pp.151-156
• /
• 2003

국내에 생우로 수입된 호주산 육우 Hereford, Angus, Murray Grey, Hereford${\times}$Angus 각각 10두의 도체등급 특성을 비교 분석하여 수입생우의 국내 비육에 대한 기초자료를 제시하고자 실시하였다. 육량등급요인 중 등지방 두께는 Hereford종이 13.7mm로 가장 얇았으며, Angus, Murray Grey, Hereford${\times}$Angus은 각각 18.20, 18.90, 17.30mm로 나타났다(p<0.05). 배최장근 단면적에서는 품종간 유의적인 차이가 나타나지 않았으며(p>0.05), 육량지수는 Hereford종이 64.63으로 가장 높았고, Murray Grey종이 62.43으로 가장 낮았다(p<0.05). 육질등급요인 중 육색은 다른 품종들에 비하여 Hereford종이 낮았으며, 지방색은 Angus종이 가장 높았다(p<0.05). 성숙도는 다른 품종에 비하여 Angus종이 가장 낮았으며(p<0.05), 근내지방도, 조직감에서는 품종간에 차이가 없었다. 품종별 근내지방도 등급 출현율은 Angus종이 근내지방도 1++등급 이상이 50%를 차지하여 가장 높았으며, Hereford종이 전두수 1++등급 미만으로 가장 낮게 나타났다. 품종별 최종 도체등급 출현율에 있어서 육질등급에서는 Angus종이 육질 2등급 출현율이 20%로 가장 좋았으며, Hereford종과 교잡종(Hereford$\times$Angus)은 100% 육질 3등급으로 가장 저조한 성적을 보였다. 육량등급 출현율에 있어서는 Hereford종이 육량 B등급 출현율 30 %로 가장 좋은 성적을 보였으나, Angus종과교잡종(Hereford${\times}$Angus)은 100% 육량 C등급으로 가장 저조한 성적을 보였다. 전체적으로 볼 때 교잡종은 전 두수 육질 3등급, 육량 C등급을 보여 육질 및 육량 면에서 가장 저조하였다. 본 연구결과 수입생우(거세우)는 한우거세우에 비하여 육량, 육질 모든 면에서 저조한 결과를 보였다. 그러나 비육시험에서 한우와 동일하게 시험을 하지 못한 면에서는 아쉬운 점이 있었으며, 한우거세우와 정확한 비교를 위해서는 동일조건에서 한우와 수입생우의 비교시험이 필요하다고 사료된다.

• Plant Breeding and Biotechnology
• /
• 제6권4호
• /
• pp.454-462
• /
• 2018

Yield and grade are the key factors that affect production value of peanut. The objective of this study was to identify QTLs for pod yield, hundred-seed weight, and total sound mature kernel (TSMK). A total of 90 recombinant inbred lines, derived from Tamrun OL07 and a breeding line Tx964117, were used as a mapping population and planted in Brownfield and Stephenville, Texas. A genetic map was developed using 1,211 SNP markers based on double digest restriction-site associated DNA sequencing (ddRAD-seq). A total of 10 QTLs were identified above the permutation threshold, three for yield, three for hundred-seed weight and four for TSMK, with LOD score values of 3.7 - 6.9 and phenotypic variance explained of 12.2% - 35.9%. Among those, there were several QTLs that were detected in more than one field experiment. The commonly detected QTLs in this study may be used as potential targets for future breeding program to incorporate yield and grade related traits through molecular breeding.

• Journal of Animal Science and Technology
• /
• 제54권1호
• /
• pp.51-58
• /
• 2012

본 연구는 고도 차이 혹은 수송 거리의 차이가 한우(거세우 및 암소)의 도체특성, 표면육색 및 혈중 cortisol 농도 변화에 미치는 영향을 검토하기 위해 실시되었다. 공시동물은 총 190두로 이중 거세한우는 118두 암소는 72두였다. 자료는 사육 고도(100, 200, 300, 400 및 500 m) 혹은 수송 거리(50, 100, 150, 200 및 250 km)에 따라 분석하였다. 사육 고도의 차이가 거세한우 및 암소의 육량 및 육질 형질 변화에 미치는 영향은 적었으며, 수송 거리의 차이가 거세한우 및 암소의 육량 형질에 미치는 영향은 없는 것으로 나타났다. 또한 수송 거리의 차이가 거세한우 및 암소의 근내지방도, 육색 및 지방색에 미치는 영향과 사육 고도 혹은 수송 거리의 차이가 거세한우 및 암소 등심의 명도, 적색도, 황색도, 선명도 및 색상색에 미치는 영향은 낮은 것으로 나타났다. 암소의 경우 사육고도 100 m에서 200 m에 비해 등심의 명도가 증가되었으며(p<0.05), 거세한우의 경우 수송 거리 250 km 그리고 암소의 경우에는 200 km에서 등심의 명도가 낮아지는 경향을 보였다. 한편, 혈중 cortisol 농도는 낮은 사육 고도에 비해 높은 사육 고도에서 낮아지는 경향을 보였으나, 통계적인 유의차는 없었다. 수송 거리가 거세한우 및 암소의 cortisol 농도에 미치는 영향은 없었다. 따라서 본 연구의 결과에서 사육 고도 혹은 수송 거리가 한우의 생산성에 미치는 영향은 적은 것으로 판단된다.