• Animal Bioscience
• /
• v.34 no.6
• /
• pp.949-956
• /
• 2021

Objective: This study was focused on the estimation of parameters of Wood's model and description of the lactation curve using the cows which were lactated over 24 months on the first lactation. Methods: The database included 1,333 pure-bred dairy Simmental primiparous cows which lactated for 24 months (732 days). The initial dataset entering the procedure of assessment of parameters of Wood's function included 35,826 milk yield records. Milk yield was recorded throughout lactation, with the earliest record taken on day 6 and the latest on day 1,348 of lactation. This dataset was used for the assessment of parameters a, b, c of Wood's model using the non-linear statistical procedure. These parameters were estimated for different length of lactation. The assessed parameters were used for calculation of some characteristics of lactation curves. Results: The lowest value of a parameter (15.2317) of Wood's model of lactation curve was found out in lactations up to 305 days long, contrary to b and c parameters which were highest in those lactations (0.1029 and 0.0015, respectively). The maximum value of a parameter (17.4329) was found out in lactations up to 640 days long, unlike b and c parameters which were minimal in those lactations (0.0603 and 0.0010, respectively). Conclusion: It can be concluded that the parameters of Wood's model and the shape of lactation curve are changing with the growing number of milk yield records. Also, the assessed parameters revealed a significant milk production potential after 305 days of lactation.

• IE interfaces
• /
• v.23 no.3
• /
• pp.205-212
• /
• 2010

The learning curve model is a mathematical form which represents the relationship between the manufacturing experience and its effectiveness. The semiconductor manufacturing is widely known as an appropriate example for the learning effect due to its complicated manufacturing processes. In this paper, I propose a new compound learning curve model for semiconductor products in which the general learning curve model and the growth curve are composed. The dependent variable and the effective independent variables of the model were abstracted from the existing learning curve models and selected according to multiple regression processes. The simulation results using the historical DRAM data show that the proposed compound learning curve model is one of adequate models for describing learning effect of semiconductor products.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.148-151
• /
• 2004

Mechanical properties such as Young's modulus and hardness of thin film in coated steel are difficult to determine by nano-indentation from the conventional analysis using the load-displacement curve. Therefore, an analysis of the nano-indentation loading curve was used to determine the Young's modulus, hardness and strain hardening exponent. A new method is recently being developed for plasticity properties of materials from nano-indentation. Elastic modulus of the thin films shows relatively small influence whereas yield strength and strain hardening are found to have significant effect on measured data. The load-displacement behavior of material tested with a Berkovich indenter and nano-indentation continuous stiffness method is used to measure the modulus and hardness through thin films.

• Transactions of Materials Processing
• /
• v.5 no.4
• /
• pp.327-336
• /
• 1996

The effect of dynamic strain aging on high temperature deformation behaviour of the A-Mg alloy was investigated by strain rate change tests and stress relaxation tests between 20$0^{\circ}C$and 50$0^{\circ}C$. Yield point, short stress transient and periodic discontinuities on the stress-strain curve were considered as an evidence of the effect of dynamic strain aging. With this criterion two distinct strain rate-temperature regimes could be manifested. Dynamic strain aging was considered to be effective in the high temperature-low strain rate regime, whereas dynamic recovery was a dominant deformation mechanism in the low temperature-high strain rate regime. It was found that dynamic strain aging in the high temperature deformation was governed by the mechcanism of diffusion-controlled, viscous dislocation movement.

• Transactions of Materials Processing
• /
• v.13 no.8
• /
• pp.731-737
• /
• 2004

Mechanical properties such as Young's modulus and hardness of thin film in coated steel are difficult to determine by nano-indentation from the conventional analysis using the load-displacement curve. Therefore, an analysis of the nano-indentation loading-unloading curve was used to determine the Young's modulus, hardness. A new method is recently being developed for elastic-plastic properties of materials from nano-indentation. Elastic modulus of the thin films shows relatively small influence whereas yield strength is found to have significant effect on measured data. The load-displacement curves of material tested with a Berkovich indenter and nano-indentation continuous stiffness method is used to measure the modulus and hardness through thin films, and then these are computed using the analysis procedure. The developed neural networks apply also to obtain reliable mechanical properties.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.146-152
• /
• 2002

The steel shows plastic deformation after the yield point exceeds. Because of overloads, the plastic deformation occurs at the interior support of a continuous bridge. The plastic deformation is concentrated at the interior support, and the permanence deformation at the interior support remains after loads pass. Because local yielding causes the positive moment at the interior support, it is called "auto moment". Auto moment redistributes the elastic moment. Because of redistribution, auto moment decreases the negative moment at the interior support of a continuous bridge. In this paper, the moment-rotation curve from Schalling is used. The Plastic rotation is computed by using Beam-line method, and auto moment is calculated based on the experiment curve. The design example is presented using limit state criterion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1551-1555
• /
• 2006

This study was carried out to investigate the use of three different mathematical models (Wood, Quadratic and Cubic) for describing the lactation curve of Akkaraman ewes. Data were collected from 42 ewes that were three years of age and from the same flock raised in The State Farm of $G{\ddot{o}}zl{\ddot{u}}$ in Konya Province. All ewes lambed in March. They were hand milked twice daily and the first milk test was performed with in the first month after lambing (mean = 27.8 day, SD = 4.26) in an attempt to describe the peak yield. The differences between estimated total milk yields by the models were not significant. The models were adequate for describing total milk yield. The differences between peak yields were not significant. The Wood model estimated the time of peak yield earlier than the other models and observed values (p<0.01). Especially the Cubic model's peak time was very close to really peak time (34.30 vs. 35.33 days). $R^2$ values of the models ranged from 85.85% to 96.20%. The Cubic model gave the best $R^2$ value (p<0.01). Correlation coefficients between descriptive values of the models changed from 0.32 to 1.00. Total milk yields of the models were highly correlated (above 0.99) with the total milk yield calculated by the Fleischmann method (p<0.01). As a result the Cubic model showed the best fit to the data collected from Akkaraman ewes and allowed a suitable description of the shape of the lactation curve.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.417-423
• /
• 1997

The objective of this study Is to supply basic data for large reservoir sedimentation research In future and make suggestions to maintain and opera능 the reservoir more of efficiently. At first, previous studios about the estimation of sediment yield rate were reviewed in Korea. And the discharge rating curves of upstream stage gauging stations and the correlation between dam Inflow and stage discharge were analyzed. With the analysis results, the spec유c sediment rate of Soyanggang dam was estimated as 608 m3/km2/yr. It was similar to that of Soyanggang dam feasibility study and 1994's field surveys of the reservoir than that of 1983's field surveys. Because the sediment rating curves were derived under the low discharge conditions, It needs to be checked under the flood conditions. However, the suggested methods such as flowrate analysis and sediment estimation will be useful to the sediment studios In future. Key words . reservoir sediment, sediment yield rate, rating curve, flowrate analysis.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.177-181
• /
• 2001

The conversion efficiency of a cesium iodine coated micro-channel plate is studied. We use the EGS4 code to transport photons and generated electrons until their energies become less than 1keV and 10keV respectively. Among the generated electrons, the emission from the secondary electrons located within the escape depth of 56nm from the photo-converter boundary is estimated by integrating the product of the secondary electrons with a probability depending only on their geometric locations. The secondary electron emission from the generated electrons of energy higher than 100eV is estimated by the 'universal yield curve'. The sum of these provides an estimate for the secondary electron yield and we show that results of applying this algorithm agree with known experimental results. Using this algorithm, we computed secondary electron emissions from a micro-channel plate used in a gas electron multiplier detector that is currently being developed at Korea Atomic Energy Research Institute.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.91-96
• /
• 1999

Semiconductive polyaniline and its derivatives such as poly(aniline-co-sodium diphenylamine sulfonate), poly (aniline-co-o-ethoxyaniline), poly (o-methylaniline), and poly (o-methoxyaniline) were synthesized, and then adopted as suspending particles of the electrorheological (ER) fluids. All suspensions of these polyaniline derivatives showed typical ER properties under high applied electric fields. However, flow behaviors are observed to be quite different depending on the polyaniline derivatives, especially in the stress plateau regions obtained at low shear rates. Using a scaling law, we also obtained universal cures of ER fluids from the flow curves at each applied electric field based on the relationship between the dynamic yield stress with the applied electric field and flow curve changes according to the electric fields.