• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.517-524
• /
• 2004

The objective of this study was to investigate the environmental effects on duration time of milk flow, peak milk flow, and average milk flow in teats, and to estimate their relationships with milk yields in morning and evening milking, and to provide fimdamental information for the further study on their relationships with clinical mastitis and somatic cell in milk. A total of 6,768 milking records were studied in 72 Holstein cows. The influences of season, parity, lactation month, and milking interval on characteristics of milk flow considering in linear model were significant(p<.05). Duration of milk flow was longest at milking in fall, past first parity and second month of lactation, and with milking interval over than 13.5hrs. Average milk flow rate and peak milk flow rate were highest at milking in summer, past first parity and 8${\sim}$10 months of lactation, and with milking interval over than 13.5hrs. Milk flow rate was positively correlated to milk yield, and negatively correlated to the duration of milk flow. However duration milk flow was positively correlated to the milk yield with high level of correlation coefficient(+.60). For the establishment of optimum selection criteria on these traits, other aspects such as the udder health, disease and respective economic weights of milk flow characteristics in this study must be considered to develop the indices.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.112-121
• /
• 2009

To obtain basic design criteria for underground anaerobic digestion and enhance biogas production from swine slurry, a $20m^3$ underground anaerobic digester (UGAD) was constructed and operated at mesophilic ($31{\sim}37^{\circ}C$) temperature with an organic loading rate (OLR) at $23.6kgVS/m^3/day$. The average biogas and $CH_4$ production rate were observed at 8.62 and $5.78m^3/day$, respectively. The mean percentile of $CH_4$ and $CO_2$ were also observed at 67.5% and 19.6%. The relative biogas yield was explored at $733L/kg\;VS_{added}$ and $CH_4$ yield was at $495L/kg\;VS_{added}$ respectively. The removal rate of biochemical constituents and pathogens were noticed considerably at 68%, 74%, 79%, 86%, 89%, 81%, 55%, 79%, 98% and 100% on TS, VS, TSS, $BOD_5$, $TCOD_{cr}$, $SCOD_{cr}$, $NH_3-N$, available P, fecal coliforms and Salmonella, respectively. This study suggested that, the modified UGAD system is a greatly desirable for anaerobic digestion for swine slurry with regards to high methane yield and biodegradability.

• Journal of Microbiology
• /
• v.37 no.2
• /
• pp.80-85
• /
• 1999

The purification system of glucoamylase (glucan 1,4-${\alpha}$-glucosidase, EC 3. 2. 1. 3), some characteristics of the purified enzyme and hydrolysis rate of various raw starch were investigated through several experiments. The enzyme was produced on a solid, uncooked wheat bran medium of Aspergillus oryzae NR 3-6 isolated from traditional Korean Nuruk. The enzyme was homogeneously purified 6.8-fold with an overall yield of 28.3% by the criteria of disc- and SDS-polyacrylamide gel electrophoresis. The molecular weight was estimated to be 48 kDa by SDS-PAGE. The optimum temperature and pH were 55$^{\circ}C$ and 4.0, respectively. The enzyme was stable at a pH range of 3.0∼10.0 and below 45$^{\circ}C$. Enzyme activity was inhibited about 27% by 1mM Hg2+. The hydrolysis rate of raw wheat starch was shown to be 17.5-fold faster than the hydrolysis rate of soluble starch. The purified enzyme was identified as glucoamylase because the product of soluble starch by the purified enzyme was mainly glucose by thin layer chromatography.

• Mycobiology
• /
• v.40 no.2
• /
• pp.111-116
• /
• 2012

Ten strains of the entomopathogenic fungi Metarhizium anisopliae and Beauveria bassiana were evaluated to find the most effective strain for optimization studies. The first criterion tested for strain selection was the mortality (> 50%) of Spodoptera litura larvae after inoculation of the fungus for 4 days. Results on several bioassays revealed that B. bassiana BNBCRC showed the most virulence on mortality S. litura larvae (80% mortality). B. bassiana BNBCRC also showed the highest germination rate (72.22%). However, its conidia yield ($7.2{\times}10^8$ conidia/mL) was lower than those of B. bassiana B 14841 ($8.3{\times}10^8$ conidia/mL) and M. anisopliae M6 ($8.2{\times}10^8$ conidia/mL). The highest accumulative radial growth was obtained from the strain B14841 (37.10 mm/day) while the strain BNBCRC showed moderate radial growth (24.40 mm/day). M. anisopliae M6 possessed the highest protease activity (145.00 mU/mL) while M. anisopliae M8 possessed the highest chitinase activity (20.00 mU/mL) during 96~144 hr cultivation. Amongst these criteria, selection based on virulence and germination rate lead to the selection of B. bassiana BNBCRC. B. bassiana B14841 would be selected if based on growth rate while M. anisopliae M6 and M8 possessed the highest enzyme activities.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.2
• /
• pp.141-155
• /
• 2014

The use of fiber reinforced polymer (FRP) composites in strengthening reinforced concrete beam-column subassemblies has been scrutinised both experimentally and numerically in recent years. While a multitude of numerical models are available, and many match the experimental results reasonably well, there are not many studies that have looked at the efficiency of different finite elements in a comparative way in order to clearly identify the best practice when it comes to modelling FRP for strengthening. The present study aims at investigating this within the context of FRP retrofitted reinforced concrete beam-column subassemblies. Two programs are used side by side; ANSYS and VecTor2. Results of the finite element modeling using these two programs are compared with a recent experimental study. Different failure and yield criteria along with different element types are implemented and a useful technique, which can reduce the number of elements considerably, is successfully employed for modeling planar structures subjected to in-plane loading in ANSYS. Comparison of the results shows that there is good agreement between ANSYS and VecTor2 results in monotonic loading. However, unlike VecTor2 program, implicit version of ANSYS program is not able to properly model the cyclic behavior of the modeled subassemblies. The paper will be useful to those who wish to study FRP strengthening applications numerically as it provides an insight into the choice of the elements and the methods of modeling to achieve desired accuracy and numerical stability, a matter not so clearly explored in the past in any of the published literature.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.435-444
• /
• 2001

Even todays, accurate and efficient algorithms for the large deformation analysis of elastoplastic frame structures lack due to the complexities of kinematics, material nonlinearities and numerical methods to cater for. The author suggests appropriate beam element based upon the incremental formulation from the 3D rod theory where Cauchy stress and engineering strain are variables to incorporate plasticity equations so that objectivity may be satisfied. A rectum mapping methods which can integrate and satisfy yield criteria efficiently is suggested and a continuation method which has global convergency and quadratic speed is developed as well. leading-unloading example problems are tested and the ideas are proved to be valuable.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.84-89
• /
• 2007

In order to guarantee the safety of the facility systems, one of the essential components is information on mechanical properties of materials used for the construction. However, acquisition or accumulation of the mechanical property data in industrial fields is limited because this operation does not yield profit, excepting few materials production companies. Corresponding to the urgent needs and poor economical features, the MOCIE has founded the National Center for Standard Reference Data in the KRISS and also designated the Data Center of Mechanical Properties for Metallic Materials (DCMP) as a principal operating section. The DCMP plays roles of collection, edition and evaluation of the mechanical data and development of reference standards. In this study, several functions of the DCMP and standardization procedures of mechanical properties data will be introduced the prospective of standard reference researches will be discussed based on active feedbacks from industrial fields.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.587-601
• /
• 2018

Elevated water tanks are inverted pendulum type structures where drift limit is an important criterion for seismic design and performance evaluation. Explicit drift criteria for elevated water tanks are not available in the literature. In this study, probabilistic approach is used to determine maximum drift limit for damage state of yielding and damage state of collapse for the elevated water tanks supported on RC frame staging. The two damage states are defined using results of incremental dynamic analysis wherein a total of 2160 nonlinear time history analyses are performed using twelve artificial spectrum compatible ground motions. Analytical fragility curves are developed using two-parameter lognormal distribution. The maximum allowable drifts corresponding to yield and collapse level requirements are estimated for different tank capacities. Finally, a single fragility curve is developed which provides maximum drift values for the different probability of damage. Further, for rational consideration of the uncertainties in design, three confidence levels are selected and corresponding drift limits for damage states of yielding and collapse are proposed. These values of maximum drift can be used in performance-based seismic design for a particular damage state depending on the level of confidence.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.413-416
• /
• 2009

For the liquid rocket engine, the gas generator oxidizer shut-off valve which supplies the oxidizer to a gas generator needs structural safety under the internal pressure, which is higher than the chamber pressure. In this study, static stress analyses of the various design in the vicinity of the region where the stress is concentrated were performed for designing the lightweight valve, A lightest model of which the concentrated stress does not exceed the yield criteria has been suggested. Also, whole size effect of the valve on the concentrated stress was investigated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.1
• /
• pp.50-56
• /
• 2007

Exhaust manifold is generally subjected to thermal cycle loadings ; at hot condition, large compressive plastic deformations are generated, and at cold condition, tensile stresses are remained in highly deformed critical zones. These phenomena originate from the fact that thermal expansions of the runners are restricted by inlet flange clamped to the cylinder head, because the former is less stiff than the latter and, the temperature of the inlet flange is lower than that of the runners. Since the failure of an exhaust manifold is mainly caused by geometric constraints between the cylinder head and the manifold, the thermal stress can be controlled by geometric factors. The generic geometric factors include the inter distance (2R), the distance from the head to the outlet (L), the tube diameter(d) and the tube thickness (t). This criteria based on elastic analysis up to onset of yield apparently indicate that the pre-stress also reduces the factor; however, high temperature relaxation may reduce this effect at later operation stage.