• 한국식품조리과학회지
• /
• 제33권1호
• /
• pp.20-27
• /
• 2017

Purpose: The objective of this study was to examine the effects of pork liver levels on the quality characteristics of hamburger patties. Methods: The effects of the addition of livers concentrations from 0% to 20% were investigated based on chemical composition, cooking characteristics, physicochemical properties, shear force, and sensory characteristics of hamburger patties. Results: The increasing pork liver levels from 0% to 20% resulted in increased moisture content, ash content, redness, reduction in diameter, and reduction in thickness of hamburger patties, but decreased the fat content, lightness, cooking yield, shear force and water holding capacity of hamburger patties. The protein content of hamburger patties with different amounts of pork liver showed no significant differences. The hamburger patties with increasing pork liver levels had lower color, flavor, juiciness, and overall acceptability scores, but the overall acceptability of control showed similar trends to T1 (treatments with 5% pork liver). Conclusion: Pork liver in the formulation showed similar quality characteristics as compared to control hamburger patties without liver, with best results obtained on adding up to 5% pork liver.

• Architectural research
• /
• 제19권4호
• /
• pp.117-124
• /
• 2017

In this research, we carried out finite element analysis depends on the variations such as the strength of the main bar, concrete, shear-span ratio(a/d) and existence of shear reinforcing bar. Throughout the results of FEM analysis, we were able to figure out how each variation can effect on shear performance. As the strength of concrete increased, the maximum shear force enhancement effect of each specimen was evaluated. As a result, the shear strengthening effect was 51~97% for shear reinforced specimens, and 26~44% for non-shear reinforced specimens. As the yield strength of reinforcing bars increases, the shear reinforcement effect of the specimen the specimens without shear reinforcement were 3%~6% higher than those with shear reinforcement. Theoretical and analytical values were compared using the design equations obtained from the CEB code. Theoretical and analytical values were compared using the design equations obtained from the CEB code. As a result, the error rate was the highest at 3.64 in the S1.0-C0 series and the lowest at 1.46 in the S1.7-C1 series. Therefore, the design equation of the CEB code is estimated to underestimate the actual shear strength of deep beams that are not subjected to shear reinforcement.

• Steel and Composite Structures
• /
• 제30권4호
• /
• pp.365-382
• /
• 2019

In steel frame-tube structures (SFTSs) the application of flexural beam is not suitable for the beam with span-to-depth ratio lower than five because the plastic hinges at beam-ends can not be developed properly. This can lead to lower ductility and energy dissipation capacity of the SFTS. To address this problem, a replaceable shear link, acting as a ductile fuse at the mid length of deep beams, is proposed. SFTS with replaceable shear links (SFTS-RSLs) dissipate seismic energy through shear deformation of the link. In order to evaluate this proposal, buildings were designed to compare the seismic performance of SFTS-RSLs and SFTSs. Several sub-structures were selected from the design buildings and finite element models (FEMs) were established to study their hysteretic behavior. Static pushover and dynamic analyses were undertaken in comparing seismic performance of the FEMs for each building. The results indicated that the SFTS-RSL and SFTS had similar initial lateral stiffness. Compared with SFTS, SFTS-RSL had lower yield strength and maximum strength, but higher ductility and energy dissipation capacity. During earthquakes, SFTS-RSL had lower interstory drift, maximum base shear force and story shear force compared with the SFTS. Placing a shear link at the beam mid-span did not increase shear lag effects for the structure. The SFTS-RSL concentrates plasticity on the shear link. Other structural components remain elastic during seismic loading. It is expected that the SFTS-RSL will be a reliable dual resistant system. It offers the benefit of being able to repair the structure by replacing damaged shear links after earthquakes.

• Tribology and Lubricants
• /
• 제16권2호
• /
• pp.75-83
• /
• 2000

The present paper proposes a new type of an electro-rheological squeeze film damper (ER SFD) of which the damping capacity can be controlled by the application of electric field. The new ER .SFD- is sealed with slotted rings having electrodes at the inside of the constant gap. The ER SFD can provent the problem of electric short which might be occurred in a previous ER SFD. Reynolds lubrication equation for a Newtonian fluid and the end leakage equation for ER fluids are numerically solved to get the pressure distributions and the damping coefficients of the ER SFD. The results show that the damping coefficients greatly increase with increasing the yield shear stress of ER fluid. In addition, the unbalance response analysis of a flexible rotor supported on the new ER SFD implies that the rotor system can be operated with the minimum of rotor amplitude and force transmissibility by controlling the yield shear stress of ER fluids properly.

• 한국축산식품학회지
• /
• 제44권4호
• /
• pp.861-872
• /
• 2024

The aim of this study was to determine the effects of sous-vide cooking temperature on the triceps brachii of black goats. Triceps brachii of black goats (12 months) were sous-vide cooked at 55℃, 60℃, and 65℃. The samples were examined for color, scanning electron microscope photographs, sarcomere length, fiber cross-sectional area, cooking yield, shear force, sensory evaluation, and aromatic profile. The results showed that CIE a^*, CIE b^*, and chroma increased with increasing sous-vide cooking temperature. However, the cooking yield significantly decreased with increasing sous-vide cooking temperature, and the shear forces of the 60℃ and 65℃ samples showed no significant differences. For sensory evaluation, the 60℃ sample showed the highest scores for flavor, texture, and off-flavor. Furthermore, the 60℃ sample showed the significantly lowest value of octadienone (aroma characteristics of metallic) intensity (p<0.05). Therefore, sous-vide cooking of triceps brachii of black goats at 60℃ is effective in reducing off-flavor and improving tenderness.

• 한국지진공학회논문집
• /
• 제20권5호
• /
• pp.319-329
• /
• 2016

The Eradi Quake System (EQS) is a seismic isolation bearing system designed to minimize forces and displacements experienced by structures subjected to ground motion. The EQS dissipates seismic energy through friction of Poly Tetra Fluoro Ethylene (PTFE) disk pad. In general, a force-displacement relationship of EQS has post yield stiffness hardening during large inelastic displacement. In this study, seismic responses of seismically isolated nuclear power plant (NPP) subjected to design basis earthquake (DBE) and beyond design basis earthquakes (150% DBE and 167% DBE) are compared considering the post yield stiffness hardening effect of EQS. From the results, it can be observed that if the post-yield stiffness hardening effect of EQS is increased, the displacement response of EQS is reduced, and the acceleration and shear responses of containment structures of NPP is increased.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.7-15
• /
• 2021

이 연구에서는 기존 중공재의 형상을 개선한 거푸집용 중공슬래브를 개발하였고, 개발된 VPS를 활용하여 휨 및 전단 실험을 수행하여 그 성능을 평가하였다. VPS의 휨 성능 실험 결과, FPS 계열 실험체의 경우 항복 하중 값은 FPS-00 실험체 대비 약 97.5%를 나타내고 있어 항복하중 값에는 큰 차이가 없는 것으로 나타났다. 또한, FNS계열 실험체도 FPS-00 실험체 대비 약 97%를 나타내어 휨 성능에는 중공재에 의한 영향이 거의 없는 것으로 나타났다. 따라서 슬래브 시스템을 VPS로 슬래브 설계에 적용할 때 건축구조기준의 설계식으로 적용하는데 문제가 없을 것으로 판단된다. VPS의 전단 성능 실험 결과, SS-00 실험체 대비 약 92%로 나타나 SS-00 실험체에 비하여 다소 부족한 것으로 나타났다. 이는 전단강도 식이 콘크리트에 의한 전단력과 철근에 의한 전단력의 합으로 표현되는 설계 식에 따라 중공재에 의하여 콘크리트 단면이 삭제되었기 때문인 것으로 판단된다. 하지만, 휨설계와 동일하게 전단설계에 적용되는 구조체의 내력도 최대하중 값을 기준으로 하는 것이 아니라 항복 하중 값을 기준으로 설계에 적용하게 된다.

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.199-223
• /
• 2003

The formulation of a non-linear shear deformable shell element is presented for the solution of stability problems of stiffened plates and shells. The formulation of the geometrical stiffness presented here is exactly defined on the midsurface and is efficient for analyzing stability problems of thick plates and shells by incorporating bending moment and transverse shear resultant force. As a result of the explicit integration of the tangent stiffness matrix, this formulation is computationally very efficient in incremental nonlinear analysis. The element is free of both membrane and shear locking behaviour by using the assumed strain method such that the element performs very well in the thin shells. By using six degrees of freedom per node, the present element can model stiffened plate and shell structures. The formulation includes large displacement effects and elasto-plastic material behaviour. The material is assumed to be isotropic and elasto-plastic obeying Von Mises's yield condition and its associated flow rules. The results showed good agreement with references and computational efficiency.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.111-122
• /
• 2009

지반에 포함된 입자의 용해작용은 흙의 강도를 저하시키고, 지하구조물의 침하를 발생시킨다. 본 논문에서는 입자용해시 혼합재의 물리적 특성 변화를 조사하고자 하였다. 침하량 측정과 전단파 측정과 같은 거시적 반응을 평가하기 위해, 소금과 모래로 구성된 혼합재를 사용하였다. 또한, 광탄성(photoelastic) 디스크와 얼음 디스크 혼합재를 이용하여 힘 연결고리(force chain), 간극, 접촉점수(coordination number), 그리고 수평력 변화와 같은 미시적 거동을 분석하였다. 소금-모래 혼합재에서 전단파는 압밀셀에 설치된 다단의 벤더 엘리먼트로 측정되었고, 광탄성 디스크-얼음 디스크 혼합재의 역학적 거동은 로드셀과 디지털 이미지를 이용하여 분석되었다. 실험결과, 소금의 용해시 전단파 속도는 초기에는 감소한 후에 증가한 후 일정한 값으로 수렴하였다. 용해가능 입자의 크기가 커질수록 그리고 입자패킹이 불규칙해질수록 입자용해시 수평력의 변화가 더 커지는 것을 알 수 있었다. 용해 후, 간극비는 증가했고, 접촉점수는 감소하였다. 본 연구에서는 힘 연결고리, 간극비, 접촉점수와 같은 입자의 거동변화가 전단파 속도와 전체시스템의 수평력 변화 같은 전체적인 거동에 영향을 주는 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.325-330
• /
• 2004

The forces acting on the tool are an important aspect of maching. For those concerned with the manufacture of machine tools, a knowledge of the forces in needed for estimation of power reguirements and for the design of machine tool elements tool-holders and fixtures, adequately rigid and free from vibration. The force reguired to form the chip is dependent on the shear yield strength of the work material un der cutting conditions which are cutting speed, workpiece, feedrate, insert type. In this study, FG, ML, MP, MC, C, RT inserts were investigated in turning using SM45C, SCM4, SKD11, SUS316, materials. The diameter of materials was 60mm, 80mm, 110mm. This paper presents MP were lowest and SKD11 were largest of the workpiece in cutting forces.