• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.259-266
• /
• 2012

A general earthquake resistant design philosophy of ductile frame buildings allows beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated by bond or shear action reveals a dramatic reduction of energy dissipation in the hysteretic response due to the severe pinching effects. In this study, a method was proposed to predict the deformability of reinforced concrete members with short-span-to-depth-ratios, which would result in bond failure after flexural yielding. Repeated or cyclic loading produces a progressive deterioration of bond that may lead to failure at lower cyclic bond stress levels. Accumulation of bond damage is caused by the propagation of micro-cracks and progressive crushing of concrete in front of the lugs. The proposed method takes into account bond deterioration due to the degradation of concrete in the post yield range. In order to verify bond deformability of the proposed method, the predicted results were compared with the experimental results of RC members reported in the technical literature. Comparisons between the observed and calculated bond deformability of the tested RC members showed reasonably good agreement.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.322-327
• /
• 2005

This study was intended to provide basic information which might be useful in increasing added values to the pork from Korean native black pigs (KNP), through comparative evaluation on carcass characteristics and meat qualities between KNP and four exotic breed groups including Duroc (DD), Landrace (LL), Yorkshire (YY), and LYD-cross (1/4LL 1/4YY, 1/2DD), and the results were summarized as follows. Live weight carcass weight, dressed meat weight, skin weight, fat weight and bone weight of KNP were significantly (p<0.05) lower than those of DD, LL, YY and LYD-cross. Carcass yield and dressed meat yield were also significantly (p<0.05) lower in KNP than other 4 groups, however, total fat, skin, bone, kidney and kidney fat in percentage were significantly (p<0.05) higher for KNP than others. Dressed meat yield was highest for YY, followed by LYD-cross and KNP. Weight of belly was 6.12, 9.43, and 9.52 kg for KNP, YY and LYD-cross, respectively. Percent belly of KNP was $11.11\%$ while other groups ranged from 11.5 to $12.2\%$ Shear force value was not different among the treatments. KNP had significantly (p<0.05) lower water holding capacity (WHC), and cooking loss, but significantly (p<0.05) higher in juiciness comparatively. KNP had significantly (p<0.05) higher $a^{*}$ value while DD had significantly (p<0.05) lower than other breeds.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.3
• /
• pp.196-204
• /
• 2002

For the study of its stability when the screw has been fixed after sagittal split ramus osteotomy(SSRO) of the mandible, the methods of screw arrangement are classified into two types, triangular and straight. The angles of screws to the bone surface are classified as perpendicular arrangements, the $60^{\circ}$ anterioinferior screw, known as triangular, and the most posterior screw, called straight arrangement, thus there are four types. The finite element method model has been made by using a three dimensional calculator and a supercomputer. The load directions are to the anterior teeth, premolar region, and molar region, and the bite force is 1 Kgf to each region. The distribution of stress, the von-Mises yield strength, and safety of margin refer to the total sum of transformed energy have been studied by comparison with each other. The following conclusion has been researched : 1. When shear stress is compared, in the triangular arrangement in the form of "ㄱ", the anterosuperior screw is seen at contributing to the support of the bone fragment. In the straight arrangement, substantial stress is seen to be concentrated on the most posterior angled screw. 2. When the von-Mises yield strength is compared, it seemed that the stress concentration on the angled anteroinferior screw is higher, it shows a higher possibility of fracture than any other screw. In the straight arrangement, stress appeared to be concentrated on the most posteriorly angled screw. 3. When the safety margins of the transfomed energy are compared, the energy conduction is much greater in the case of the angled screw than in the case of the perpendicular screw. The triangular arrangement in the form of "ㄱ" shows a superior clinical sign to that of the straight arrangement. Judging from the above results, when the screw fixation is made after SSRO in practical clinical cases, two screws should be inserted in the superior border of mandibular ramus and a third screw of mandibular inferior border should be inserted in the form of triangular. All screws on the bony surface should be placed perpendicularly-$90^{\circ}$ angles apparently best promote bony support and stability.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.727-735
• /
• 2014

This study was conducted to determine the effects of using mechanically deboned chicken meat (MDCM) and collagen on quality characteristics of semi-dried chicken jerky. In experiment I, semi-dried chicken jerky was prepared with the replacement of chicken breast with MDCM (0, 10, 20, and 30%). The pH value of the jerky formulated with only chicken breast was 5.94, while the replacement of chicken breast with MDCM significantly increased the pH (p<0.05). The protein content and shear force of the jerkies decreased with increasing amounts of MDCM, whereas the fat, ash content and processing yield showed the opposite tendency (p<0.05). Replacement with up to 10% MDCM had no adverse effects on the sensory characteristics of the semi-dried chicken jerky. In experiment II, four levels of pork collagen (0, 1, 2, and 3%) were added to the semi-dried chicken jerky formulated with 90% chicken breast and 10% MDCM. The addition of collagen increased the moisture content, but decreased the ash content of the jerkies produced (p<0.05). The processing yield of the jerkies increased with increasing added amounts of collagen (p<0.05). It was found that the jerkies formulated with 0-2% collagen had significantly higher overall acceptance score than those prepared with 3% collagen (p<0.05). In conclusion, MDCM and collagen could be useful ingredients to reduce the production cost and improve the processing yield of semidried chicken jerky. The optimal levels of MDCM and collagen which could be added without adverse effects on the sensory characteristics were up to 10% and 2%, respectively.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1131-1143
• /
• 2018

This study aimed to investigate the drying yield, meat quality, oxidation stability and sensory properties of Hanwoo beef loin subjected to different dry-aging conditions. A total of 54 Hanwoo beef loins (bone-in, $6^{th}-13^{th}$ ribs) with fat cover at 2 d postmortem were assigned to four groups and hung in a dry-aging room at a controlled temperature ($2^{\circ}C-4^{\circ}C$), humidity (65%-85%) and air velocity (3 m/s). Four treatment conditions were tested; the respective temperature, humidity and treatment duration are as follows: T1, $2^{\circ}C$, 85%, 60 d; T2, $2^{\circ}C$, 65%, $20d+2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 20 d; T3, $2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 40 d; T4, $4^{\circ}C$, 85%, 60 d. The drying yield, total aerobic counts and fat contents increased, whereas the moisture content, meat color (CIE $L^*$, $a^*$, and $b^*$), and Warner-Bratzler shear force values decreased significantly during the aging period for all treatments (p<0.05). The cooking loss (%) did not change significantly until 40 d, and it was significantly higher in T1 and T4 than in T2 and T3 at 60 d (p<0.05). The water-holding capacity, pH and lipid oxidation [thiobarbituric acid reactive substance (TBARS) values] increased during aging (p<0.05). The sensory scores for tenderness, juiciness, flavor, and overall acceptability of dry-aged loin muscles increased as the aging period increased. T2 and T3 had significantly higher sensory scores and T1 had significantly lower scores for tenderness, juiciness, flavor, and overall acceptability at 20, 40, and 60 d for loin muscles (p<0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.237-246
• /
• 2019

The Electro-Mechanical Brake (EMB) is the next generation braking system for automobiles and railway vehicles. Current brake systems for high-speed trains generate a braking force using a pneumatic cylinder, but EMB systems produce that force through a combination of an electric motor and a gear. In this study, an EMB operation mechanism capable of generating a high braking force was proposed, and structural and vibration analyses of the gears and shafts, which are the core parts of the mechanisms, were performed. Dynamic structural analysis confirmed that the maximum stress in the analysis model was within the yield strength of the material. In addition, the design that maximizes the diameter of the motor shaft was found to be advantageous in strength, and large shear stress could be generated in the bolt fixing the gear and eccentric shaft. In addition, a test apparatus that can reproduce the mechanism of the analytical model was fabricated to measure the strain of the fixed bolt part, which is the most vulnerable part. The strain measurement results showed that the error between the analysis and measurement was within 10%, which could verify the accuracy of the analytical model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.260-267
• /
• 2015

The effect of different tumbling marination treatments (control group, CG; conventional static marination, SM; vacuum continuous tumbling marination, CT; vacuum intermittent tumbling marination, IT) on the quality characteristics of prepared pork chops was investigated under simulated commercial conditions. The CT treatment increased (p<0.05) the pH value, $b^*$ value, product yield, tenderness, overall flavor, sensory juiciness and overall acceptability in comparison to other treatments for prepared boneless pork chops. The CT treatment decreased (p<0.05) cooking loss, shear force value, hardness, gumminess and chewiness compared with other treatments. In addition, CT treatment effectively improved springiness and sensory color more than other treatments. However, IT treatment achieved the numerically highest (p<0.05) $L^*$ and $a^*$ values. These results suggested that CT treatment obtained the best quality characteristics of prepared pork chops and should be adopted as the optimal commercial processing method for this prepared boneless pork chops.

• Korean Journal of Food Science and Technology
• /
• v.49 no.2
• /
• pp.158-161
• /
• 2017

This study investigated the quality change in dry aged beef cattle loins (temperature: $3{\pm}1$, lative humidity: $75{\pm}5%$, period: 14 days), compared to non-aged beef cattle loins (control). The water content of dry aged loins was lower than that of the control (p<0.001). The fat content, protein content, pH value, and redness in dry aged loins were higher than in the control. Moreover, dry aging significantly improved the water holding capacity and cooking yield of beef cattle loin (p<0.001). The shear force of dry aged loins was significantly lower than in the control (p<0.01). The flavor, tenderness, juiciness, and overall acceptability of dry aged loins were higher than in the control according to sensory evaluation. Therefore, dry aging can improve the quality properties of beef cattle loins.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.101-107
• /
• 2015

The aim of this study was to investigate the effects of various marination processes on the quality characteristics of chicken breast prepared with chicken feet gelatin and wheat fiber. The chicken feet gelatin was swollen with hydrochloric solution (0.1 N HCl, pH $1.31{\pm}0.02$) and dehydrated by freeze-drying. The composition (w/w) of the marinade was water (10%), soy sauce (12%), phosphate (0.3%), wheat fiber (1.5%), and chicken feet gelatin (1.5%). Three samples of chicken breast were manufactured with Tumbler (only tumbler), Tenderizer (tenderizer and tumbler), and Injector (injector and tumbler). The water content of the Injector sample was significantly higher than those of the Tumbler and Tenderizer samples (p<0.05). During heating, the lightness of all chicken breasts increased and the redness decreased. The tumbling and cooking yield of the Injector sample were significantly higher than those of the Tumbler and Tenderizer samples (p<0.05). The shear force of the Tenderizer sample was significantly lower than that of the Tumbler and Injector samples (p<0.05). No significant differences, except for color, were observed in the sensory analysis of the samples. Thus, the proper selection of mechanical processing is important to improve the quality characteristics of marinated chicken breast, considering the types of final products.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.55-61
• /
• 2009

The objective of this study was to examine the effects of high and low chilling temperature on the water-holding capacity (WHC) and tenderness of hot-boned breast meat of broiler chickens. Breast meat was obtained from 32 broiler chickens within 15 min post-mortem (PM), and then divided into two groups. One group was chilled at $-1^{\circ}C$ and the other group was stored at $30^{\circ}C$ for 3 hr, and then all the samples were chilled at $2^{\circ}C$ until 24 hr PM. During the storage, their physicochemical characteristics were tested at 15 min, 3 hr and 24 hr PM. These included pH, R-values, cooking losses, sarcomere length, MFI, and shear force of the breast meat, none of which was different (p>0.05) between the two temperature treatments at $-1^{\circ}C$ and $30^{\circ}C$. However, sarcomere length was shortened more at $-1^{\circ}C$ than at $30^{\circ}C$, MFI was larger at $30^{\circ}C$ than at $-1^{\circ}C$, drip loss was greater at $30^{\circ}C$ than at $-1^{\circ}C$, and WHC was lower at $30^{\circ}C$ than at $-1^{\circ}C$(p<0.05). In brief, in terms of yield and tenderness, broiler breast meat stored at $-1^{\circ}C$ was superior to that stored at $30^{\circ}C$.