• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.55-66
• /
• 1986

A complete diallel cross using ten varieties of Corylus avellana was made to select the best general combiners and the best specific combiners for each characteristic of each variety. The variety "Barcelona" showed the best general combining ability in kernel yield per hectare and the combinations, between Kara and Badem, between Badem and Barcelona, between Sivri and Barcelona, between Sirri and Barcelona, between Palaz and Barcelona, between Tombul and Kara, between Barcelona and Sivri, between Fiukuken2 and Hukuken3, and between Hukuken3 and Hukuken2, showed the best specific combining abilities in kernel yield. The other characteristics such as fruiting rate, pericarp thickness, weight/nut, kernel weight/nut, kernel ratio, and kernel yield per tree or hectare were also compared between the combinations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1298-1302
• /
• 2000

Electrorheological(HER) and magnetorheologica(MR) fluids have a unique ability to increase the dynamic yield stress of the fluid substantially when electric or magnetic field is applied. ER and MR fluid-based dampers are typically analyzed using Bingham-plastic shear flow analysis under Quasi-steady fully developed flow conditions. An alternative perspective, supported by measurements reported in the literature, is to allow for post-yield shear thinning and shear thickening. To model these, the constant post-yield plastic viscosity in Bingham model can be replaced with a power-law model dependent on shear strain rate that is known as the Herschel-Bulkley fluid model. The objective of this paper is to predict the damping forces analytically in a typical ER bypass damper for variable electric field, or yield stress using Herschel-Bulkley analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.809-814
• /
• 1998

Recently many cases that using strengthening method with a steel plate or carbon-fiber sheet in a construction field are increasing. In this reason, it is demanded that developing a plan of preventing delamination of strengthening material. So in this research, for the case of strengthening method of steel plate, it is made use of notch and anchor bolt and for the case of carbon fiber sheet, it is made use of notch, anchor bolt, line anchor and shear strengthening. After all the cases were applied, we made 15 specimen beams. The beams was measured and analyzed about the behavior property of strengthened beams, the ability strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods results in almost same value until the yield load, and it wasn't quite different from the theoretical value. But for the case of increasing rate from the yield load and maximum load, comparing with the existing method, the new strengthening methods are proved to be profitable about the safety.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.137-148
• /
• 2007

Using a strain-controlled rheometer [Rheometrics Dynamic Analyzer (RDA II)], the steady shear flow properties of a semi-solid ointment base (vaseline) have been measured over a wide range of shear rates at temperature range of $25{\sim}60^{\circ}C$. In this article, the steady shear flow properties (shear stress, steady shear viscosity and yield stress) were reported from the experimentally obtained data and the effects of shear rate as well as temperature on these properties were discussed in detail. In addition, several inelastic-viscoplastic flow models including a yield stress parameter were employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models was examined by calculating the various material parameters (yield stress, consistency index and flow behavior index). Main findings obtained from this study can be summarized as follows : (1) At temperature range lower than $40^{\circ}C$, vaseline is regarded as a viscoplastic material having a finite magnitude of yield stress and its flow behavior beyond a yield stress shows a shear-thinning (or pseudo-plastic) feature, indicating a decrease in steady shear viscosity as an increase in shear rate. At this temperature range, the flow curve of vaseline has two inflection points and the first inflection point occurring at relatively lower shear rate corresponds to a static yield stress. The static yield stress of vaseline is decreased with increasing temperature and takes place at a lower shear rate, due to a progressive breakdown of three dimensional network structure. (2) At temperature range higher than $45^{\circ}C$, vaseline becomes a viscous liquid with no yield stress and its flow character exhibits a Newtonian behavior, demonstrating a constant steady shear viscosity regardless of an increase in shear rate. With increasing temperature, vaseline begins to show a Newtonian behavior at a lower shear rate range, indicating that the microcrystalline structure is completely destroyed due to a synergic effect of high temperature and shear deformation. (3) Over a whole range of temperatures tested, the Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable and have an almostly equivalent ability to quantitatively describe the steady shear flow behavior of vaseline, whereas the Bingham, Casson,and Vocadlo models do not give a good ability.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.59-59
• /
• 2017

Rice (Oryza sativa L.) is the most important crop and its yield must be improved to feed the increasing global population. Recently developed high-yielding varieties with extra-large sink capacity often have a problem in unstable grain-filling. Therefore, understanding limiting factors for improving grain-filling and controlling them are essential for further improvement of rice grain yield. However, since grain-filling rate was determined by complex sink-source balance, the ability of grain-filling was very difficult to evaluate. Source ability for 'grain' was not only determined by the ability of carbon assimilation in leaves, but also that of carbon translocation from leaves to panicles. Sink strength was determined by the complex carbon metabolism from sucrose degradation to starch synthesis. Hence, to evaluate the grain-filling ability and determine its regulatory steps, the whole picture of carbon flow from photosynthesis at leaves to starch synthesis at grains must be revealed in a metabolite level. In this study, the yield and grain growth rate of three high-yielding varieties, which show high sink capacity commonly, were compared. Momiroman showed lower grain filling rate and slower grain growth rate than the other varieties, Hokuriku 193 and Tequing. To clarify the limiting point in the carbon flow of Momiroman, $CO_2$ labeled by stable isotope ($^{13}C$) was fed to three varieties during ripening period. The ratio of $^{13}C$ left in the stem was higher in Momiroman 24 hours after feeding, suggesting inefficient carbon translocation of Momiroman. More interestingly, $^{13}C$ translocation from soluble fraction to insoluble one in the grain seemed to be slower in Momiroman. To get the further insight in a metabolite level, we are now trying the $^{13}C$ labeling metabolome analysis in the developing grains.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.3
• /
• pp.220-226
• /
• 2018

Background: Atractylodes japonica Koidz. and Atractylodes macrocephala Koidz. belong to the family (Asteraceae). Their rhizomes, called white Atractylodes rhizomes, are used in traditional medicine. To address some issues with their cultivation, we recently developed eight hybrid cultivars by interspecific hybridization of A. japonica and A. macrocephala. This study was conducted to screen the hybrid cultivars that have high amounts of active ingredients and yield ability. Methods and Results: Experiments were conducted using the eight hybrid cultivars and A. macrocephala (control cultivar) in the experimental field of the department of Herbal Crop Research located in Eumseong, South Korea. We investigated the growth characteristics of the aerial and underground parts. Among the cultivars, 'Sanwon' had the highest rhizome dry weight (53.8 g/plant), followed by 'Dachul' (50.0 g/plant). In addition, the content of atractylenolide I, II, III and total active ingredients were investigated using high-performance liquid chromatography. Compared with A. macrocephala, most of the inter-specific hybrid cultivars had a higher content of active ingredients and yield ability. Conclusions: Through study, we established the superior quality of Atractylodes inter-specific hybrid cultivars. In particularly, it was found that 'Dachul' may be grown as a superior cultivar, with high amount of active ingredients as well as yield ability.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1986.06a
• /
• pp.22-23
• /
• 1986

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.107-113
• /
• 2003

Analysis of combining ability is a widely used biometrical tool to select promising parents and hybrids, to determine the kinds and relative magnitudes of genetic variability among hybrids as well as to forecast yield attributes in early breeding generations both in plants and animals. Various statistical approaches like Jinks and Hayman (1953), Griffing (1956), Kempthorne (1957) etc. have been extensively applied in plants. These approaches have also been tried in the mulberry silkworm, Bombyx mori L. In the present review, an attempt has been made to collect most of the studies carried out on combining ability in silkworm at one place and make it available to the scientists engaged in sericultural research.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.228-237
• /
• 1996

On the basis of a brief introduction of the mechanized dry farming in Heilongjiang Province, the author states the developing process from the combination of single technics of farm machinery and agronomy to the technical assembly of high yield cultivation technics and its mathematical expression. According to the main temperature accumulated zones, 5 typical comprehensive technical assembly models for the mechanized cultivation technics and their agricultural machinery systems have been listed. They are, the Heihe " 261" wheat and soybean model : the Yi'an big ridge double row film mulching corn model : the Yongchang high yield mechanized soybean and other grain crops six year rotation model for Keshan state farms. The author conclude that the application of mechanized high yield cultivation technical assembly is the key point to transform the Heilongjiang province from big agriculture to strong agriculture, we have to take " high yield , high quality , high efficiency , s stain -ability and earning foreign currency" as the general target and carry out the corresponding policy and measures for the further development of agricuture.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.2-11
• /
• 2021

Objective: The aim of the study was to evaluate the influence of polymorphic loci and other factors on milk performance and the technological properties of milk. Methods: The analysis was performed on Simmental and Holstein cows in field conditions (n = 748). Milk yield in kg, fat and protein percentage and yield were evaluated. Technological properties were evaluated by milk fermentation ability, renneting, and an alcohol test. Polymorphisms in the acyl-CoA diacylgycerol transferase 1 (DGAT1), leptin (LEP), fatty acid synthase (FASN), stearoyl CoA desaturase 1 (SCD1), casein beta (CSN2), casein kappa (CSN3), and lactoglobulin beta genes were genotyped, and association analysis was performed. Results: The DGAT1 AA genotype was associated with higher milk, protein and fat yields (p<0.05). The MM genotype in the LEP gene was associated with a lower protein percentage and the W allele with a higher protein percentage (p<0.05). In cows with the FASN GG genotype, the protein percentage was higher, but the A allele was associated with higher milk, protein and fat yields than the G allele. The TT genotype in SCD1 was associated with the lowest milk, protein and fat yields and with the highest milk protein percentage (p<0.01). The T allele had higher values than the C allele (p<0.05) except for fat percentage. The genotype CSN3 AA was associated with a significantly heightened milk yield; BB was associated with a high protein percentage. The effect of the alleles on the technological properties was not significant. The CSN2 BB genotype was associated with the best alcohol test (p<0.01), and the renneting order was inverse. Milk from cows with the CSN2 A1A1 genotype was best in the milk fermentation ability. CSN3 significantly affected the technological properties. Conclusion: The findings revealed the potential of some polymorphic loci for use in dairy cattle breeding and for the management of milk quality. In field research, the pivotal role of farms in milk yield, composition and technological properties was confirmed.