• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.457-460
• /
• 2002

In an effort to isolate novel strains expressing a thermostable esterase that hydrolyzed the rac-ketoprofen ethyl ester to ketoprofen in the stereospecific manner, we screened various soils and composts from broad ecological niches in which the activity was expected to be found. Three hundreds of microbial strains were tested to determine their ester-hydrolyzing activity by using an agar plate containing insoluble tributyrin as an indicative substrate, and then further screened by activity on the (R,S)-ketoprofen ethyl ester. Twenty-six strains were screened primarily at high growth and incubation temperature and further compared the ability to ethyl ester-hydrolyzing activity in terms of conversion yield and chiral specificity. Consequently, a strain JYl44 was isolated as a novel strain that produced a (R)-stereospecific esterase with high stability and systematically identified as a Bacillus stearothermophilus JY144. The enzyme indeed stables at a broad range of temperature, upto 65 $^{\circ}C$, and pH ranging from 6.0 to 10.0. The optimal temperature and pH for enzymatic conversion were 50 $^{\circ}C$ and 9.0, respectively. Based on the observations that resulted a poor cell growth, and enzyme expression in wild type strain, we further attempted the gene cloning into a general host Escherichia coli and determined its primary structure, concomitantly resulting a high level expression of the enzyme. The cloned gene had an open reading frame (250 amino acids) with a calculated molecular mass of 27.4 kDa, and its primary structure showed a relative high homology (45-52 %) to the esterases from Streptomyces and Bacillus strains. The recombinant whole cell enzyme could efficiently convert the rac-ketoprofen ethyl ester to (R)-ketoprofen, with optical purity of 99 % and yield of 49 %.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.488-496
• /
• 1983

Narrow and broad sense heritabilities for the characters ranged from 0.1618 to 0.6914 and from 0.7494 to 0.9357, respectively, in F$_1$ hybrids of $5{\times}5$ full diallel crosses. Plant height and days to flowering had the highest heritabilities and yield and quality the lowest. Partial dominance was exhibited by plant height, number of leaves, leaf area per plant and days to flowering. Over dorminance was detected by leaf width and yield of cured leaf. Leaf length and quality would be considered being controlled by a complete dominance effect.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.273-277
• /
• 2000

Some fundamental conditions were investigated in microwave-assited extraction (MAE) for oleoresin from Chinese dried ginger. The fifty watts of microwave energy(2,450 MHz), 60 mesh in particle size and 1:10 (g/mL) ratio of sample to solvent were the optimum conditions. Lower yield of soluble oleoresins was obtained at higher concentrations of ethanol. Radical scavenging ability was highest in extracts by using 25% of ethanol. Total phenolics in extracts were remarkably increased at above 50% of ethanol concentration. Overall yield of oleoresin components increased in proportional to extraction time up to 7 min. Based on the above results, it is indicated that ethanol concentration is a critical parameter in MAE.

• Food Science of Animal Resources
• /
• v.33 no.2
• /
• pp.221-228
• /
• 2013

This study was performed to evaluate the effects of various levels of mungbean flour (MF) (0-2.4%) on the quality characteristics of pork model sausages (PMS) in experiment 1 and also select the optimum level of MF to enhance the water retention and gelling properties of low-salt PMS (LSPMS) with or without microbial transglutaminase (MTGase) in experiment 2. In experiment 1, the addition of MF did not affect pH, chemical compositions (fat and moisture contents), color values, and functional properties (expressible moisture, EM (%) and cooking yield, CY (%)) of PMS. However, the addition of MF increased the chewiness of PMS and hardness if the mungbean flour at the level of more than 1.2% was incorporated. Since the interaction between the microbial transglutaminase (MTGase) treatment and MF level was not significant (p>0.05), data were pooled by different factors (MTGase treatment and MF level) in experiment 2. MF improved the water binding ability and textural springiness of LSPMS. On the other hand, MTGase treatment decreased the pH and cooking yield (%) of LSPMS, but increased most textural properties. In conclusion, the addition of MF could enhance the water retention and textural properties of PMS and LSPMS, regardless of MTGase, when it was added to over 1.2%. Based on these results, mungbean protein may interact with MTGase on the low-salt comminuted meat systems. Therefore, further study might be needed to understand the mechanisms of interaction between MTGase and functional components induced from MF.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.7
• /
• pp.1004-1014
• /
• 2013

Six nonpathogenic fungal strains isolated from alkaline soils of Buenos Aires Province, Argentina (Acremonium murorum, Aspergillus sidowii, Cladosporium cladosporoides, Neurospora tetrasperma, Purpureocillium lilacinum (formerly Paecilomyces lilacinus), and Westerdikella dispersa) were tested for their ability to produce keratinolytic enzymes. Strains were grown on feather meal agar as well as in solid-state and submerged cultures, using a basal mineral medium and "hair waste" as sole sources of carbon and nitrogen. All the tested fungi grew on feather meal agar, but only three of them were capable of hydrolyzing keratin, producing clear zones. Among these strains, P. lilacinum produced the highest proteolytic and keratinolytic activities, both in solid-state and submerged fermentations. The medium composition and culture conditions for the keratinases production by P. lilacinum were optimized. Addition of glucose (5 g/l) and yeast extract (2.23 g/l) to the basal hair medium increased keratinases production. The optimum temperature and initial pH for the enzyme production were $28^{\circ}C$ and 6.0, respectively. A beneficial effect was observed when the original concentration of four metal ions, present in the basal mineral medium, was reduced up to 1:10. The maximum yield of the enzyme was 15.96 $U_c/ml$ in the optimal hair medium; this value was about 6.5-fold higher than the yield in the basal hair medium. These results suggest that keratinases from P. lilacinum can be useful for biotechnological purposes such as biodegradation (or bioconversion) of hair waste, leading to a reduction of the environmental pollution caused by leather technology with the concomitant production of proteolytic enzymes and protein hydrolyzates.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.123-131
• /
• 1999

Liquid crystal known as a rheological barrier to coaleseence of oil dorplets. increases. emulsion stability, water-holding capacity and promotes active material penetration to skin. Some investigation for its rheological characteristics have been reported but its relations to consumer perception have been rarely published. In this study oil/water emulsion and oil/liquid crystal/water systems were manufactured using the same composition of Behenyltrimethylammonium chloride/Cetostearyl alcohol/Lanolin oil. and rheological properties of each system were investigated with Cone and Plate rheometer. The formation of liquid crystalline phase was observed with polarized microscope and Differential Scanning Calorimeter. Continuous shear experiment, creep yield and water holding capacity were measured for oil/water and oil/liquid crystal/water systems. The results were compared with sensory evaluations. Oil/liquid crystal/water system showed higher viscosity at the same shear rate, higher viscoelasticity and higher yield stress than oil/water system. These properties were expected to show good spreadability and excellent richness without waxiness I hair care products of creme type. This expectation was consistent with the results of sensory experiments. Water-holding capacity was evaluated by measuring residual water of specimens at specific temperature and relative humidity, Oil/liquid crystal/water system was proved to have ability to hold water in comparison with oil/water system. The results indicated that oil/liquid crystal/water system was of benefit to rheological properties creme type hair care products.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.4
• /
• pp.257-263
• /
• 2011

This study investigated the changes of antioxidant activity and ${\alpha}$-glucosidase inhibitory effect of Jerusalem artichoke (Helianthus tuberosus) 100% methanol extracts by various heat treatment. The contents of total phenolic and flavonoid compounds in methanol extract tended to increased gradually with the rise of temperature to 180$^{\circ}C$. The maximum yield of gallic acid (51.52 ${\pm}$ 2.17mg/g extract weight) and quercetin (13.39 ${\pm}$ 0.03mg/g extract weight) were obtained with extraction temperature of 180$^{\circ}C$ for 120min. In addition, the improving extraction efficiency resulted in the increased biological activities, such as electronic donation ability (EDA, 90.36${\pm}$ 0.57%), reducing power (Abs 1.14) and ${\alpha}$-glucosidase inhibitory effect (92.14 ${\pm}$ 1.14%). Overall, the results of this study indicate that the optimum conditions for the extraction process were an extraction temperature at 180$^{\circ}C$ for 120 min, and will provide the basis for future research on the improving extraction yield of phenolic and flavonoid compounds.

• Journal of Embryo Transfer
• /
• v.31 no.1
• /
• pp.73-80
• /
• 2016

An in vitro assay following culture of endometrial epithelial cells is essential for understanding epithelial cell function in reproduction. Several diverse techniques have been developed for isolating endometrial epithelial cells, although an optimal technique has not been identified. In this study, we describe a sedimentation-adherence (S-A) isolation technique with a high-yield cell-separating ability to isolate endometrial epithelial cells from 8-week-old female C57BL/6 mice. We analyzed total cell number, viability, morphology, and expression of cytokeratin 18 as an endometrial epithelial cell-specific marker in cells isolated using a mechanical method compared to the S-A technique. There were no significant differences in the total number, viability, or morphology of the putative endometrial epithelial cells with either method. In contrast, significantly more endometrial epithelial cells harvested using the S-A method were positively stained for cytokeratin 18 than those isolated using the mechanical method. These results confirm that the S-A method is more efficient for retrieving endometrial epithelial cells than a mechanical method.

• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.282-285
• /
• 2012

In this study, the ability of Chlorella vulgaris and Dunaliella salina to use biomass resources for anaerobic digestive biogas production was examined. The differences in cell wall structure pretreatments affecting the yield of soluble products showed that D. salina is a better candidate for biogas production than C. vulgaris. There was no significant difference between pretreated and non-pretreated D. salina in terms of methane production yield by inocula obtained from anaerobic digestion systems. Therefore, D. salina is a suitable algal biomass for biogas production due to its high biomass productivity, simple pretreatment needs, and easy conversion to biogas.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.48-53
• /
• 2003

This study is to look at the effect for deformation of carbon steel for high-presure pipe, on the AE signals produced by tensile test. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. We investigated a relationship failure mode and AE signals by tensile test, From the tensile test, we could divide into four ranges of the failure modes of elastic range, yield range, plastic range before $\sigma$u, plastic range after $\sigma$u. And failure behaviors of elastic range, yield range, plastic range before $\sigma$u, plastic range after $\sigma$u could be evaluated in tensile test by AE counts, accumulation counts and time frequency analysis. It is expected to be basic data that can protect a risk according to tensile test and bending of pipe material for pressure vessel, as a real time test of AE.