• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.11-17
• /
• 2006

The purpose of this study was to evaluate the smoothness of movement during various walking speeds. Based on the maximum smoothness theory (or the minimum jerk theory), we hypothesized that the walking speed at the maximum smoothness (or minimum normalized jerk) is the same as that at the minimum energy consumption. Eleven university students participated in treadmill walking experiment with 11 different walking speeds (1.11, 1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2, 211, 233, and 2.47m/sec). Normalized jerk at 15 markers and the center of mass was calculated. Results showed that there existed a quadratic relationship between the normalized jerk of the vertical direction at the center of mass and the walking speed As the walking speed increased, the normalized jerk of all directions at the heel decreased Our hypothesis that the previously published energetically optimal walking speed ($1.25\;{\sim}\;1.4m/s$) is the same as the minimum jerk speed (1.78m/s) did not agree with this result. The minimum normalized jerk at the center of mass occurred at the walking speed of 1.78m/s which was the preferred walking speed by subjects' questionaries. Further studies concerning the energetically optimal walking speed, preferred walking speed, and walk-run transition speed or run-walk transition speed are necessary based on actual energy consumption experiment and various multi-dimensional analysis.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.4
• /
• pp.496-502
• /
• 2015

Polyketide secondary metabolites share common precursor pools, acyl-CoA. Thus, the effects of engineering strategies for heterologous and native secondary metabolite production are often determined by the measurement of pikromycin in Streptomyces venezuelae. It is hard to compare the effectiveness of engineering targets among published data owing to the different pikromycin production media used from one study to the other. To determine the most important nutritional factor and establish optimal culture conditions, medium optimization of pikromycin from Streptomyces venezuelae ATCC 15439 was studied with a statistical method, Plackett-Burman design. Nine variables (glucose, sucrose, peptone, (NH₄)₂SO₄, K₂HPO₄, KH₂PO₄, NaCl, MgSO₄·7H₂O, and CaCO₃) were analyzed for their effects on a response, pikromycin. Glucose, K₂HPO₄, and CaCO₃ were determined to be the most significant factors. The path of the steepest ascent and response surface methodology about the three selected components were performed to study interactions among the three factors, and the fine-tune concentrations for maximized product yields. The significant variables and optimal concentrations were 139 g/1 sucrose, 5.29 g/l K₂HPO₄, and 0.081 g/l CaCO₃, with the maximal pikromycin yield of 35.5 mg/l. Increases of the antibiotics production by 1.45-fold, 1.3-fold, and 1.98-fold, compared with unoptimized medium and two other pikromycin production media SCM and SGGP, respectively, were achieved.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.195-199
• /
• 2001

A study was carried out to establish a detection method for irradiated black pepper using amylograph characteristics. The maximum viscosity, viscosity at $93^{\circ}C$, viscosity after 15 min at $93^{\circ}C$, viscosity at $45^{\circ}C$, viscosity after 30 min at $45^{\circ}C$, and viscosity after 60 min at $45^{\circ}C$ decreased with increasing irradiation doses, but initial pasting temperatures, maximum viscosity temperatures, breakdown, setback, and consistency did not show great changes. The high correlation coefficients $(R^2>0.97)$ were shown between irradiation doses and amylograph characteristics except for breakdown $(R^2>0.75)$, setback $(R^2>0.88)$ and consistency $(R^2>0.31)$. These results suggest that detection of irradiated black pepper is possible using amylograph characteristics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.229-237
• /
• 2011

In this paper, a 60 GHz LTCC SiP with low-power CMOS OOK modulator and demodulator is presented. The 60 GHz modulator is designed in a 90-nm CMOS process. The modulator uses a current reuse technique and only consumes 14.4-mW of DC power in the on-state. The measured data rate is up to 2 Gb/s. The 60 GHz OOK demodulator is designed in a 130nm CMOS process. The demodulator consists of a gain boosting detector and a baseband amplifier, and it recovers up to 5 Gb/s while consuming low DC power of 14.7 mW. The fabricated 60 GHz modulator and demodulator are fully integrated in an LTCC SiP with 1 by 2 patch antenna. With the LTCC SiP, 648 Mb/s wireless video transmission was successfully demonstrated at wireless distance of 20-cm.

• Journal of Korean Academy of Nursing
• /
• v.37 no.5
• /
• pp.665-675
• /
• 2007

Purpose: The purpose of this study was to explore the experiences of people with chronic hepatitis B (CHB) in Korea. The specific aim was to identify major problems that people with CHB face and strategies that they are dealing with. Methods: A grounded theory method was utilized. The data were collected by individual in-depth interviews from 12 CHB patients from one of the major hospitals in Korea. Results: After constant comparative analysis, a core category emerged as "illness management with self-reliance and will." Seven major strategies that were identified in dealing with the illness were maintaining receptive and positive attitudes; restraining excessive work and greed; searching for information; controlling illness information; adhering to practices for not spreading the viral disease; abstaining from alcohol and smoking and maintaining healthy eating habits; nd using alternative therapies. The outcomes that result from employing these strategies were identified as burden, depression and helplessness, stress for maintaining compliance, and dispirited interpersonal relationships. Conclusion: The results of this study suggest that most people with CHB in Korea have problems in psychosocial area. Thus health professionals need to provide not only informational support but also emotional one to improve quality of life of the people with CHB.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.399-406
• /
• 2013

Reports about the intrusion of a natural tooth bounded by implants are very rare, although some concerns have been discussed on the intrusion of teeth connected to implants. A female aged 56 years received an implant (mandibular right first premolar) and post/core onto root rest (mandibular right second premolar) and was restored by single zirconia crown, respectively. Molars were implant restorations. Four month after loading, second premolar was intruded and prominent gap was shown between opposite tooth. Because nonspecific discomfort was expressed, observation was decided after explanation of prognosis of tooth without treatment. Three month later reversal to original position was detected on the periapical radiographs and fully recovered position with intimate contact was completed 11 more months later. Till now 2 years and 3 month observation is being performed. Through the observation of spontaneous recovery of a natural tooth bounded by implants, the cause of intrusion and a mechanism of spontaneous recovery could be estimated.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.611-618
• /
• 2007

We demonstrate the sol-gel coating technique of colloidal clusters for producing hollow micro-particles with complex morphologies. Cross-linked amidine polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion copolymerization of styrene and divinylbenzene. The amidine PS particles were self-organized inside toluene-in-water emulsion droplets to produce large quantities of colloidally stable clusters. These clusters were coated with thin silica shell by sol-gel reaction of tetraethylorthosilicate (TEOS) and ammonia, and the organic polystyrene cores were removed by calcination at high temperature to generate nonspherical hollow micro-particles with complex morphologies. This process can be used to prepare hollow particles with shapes such as doublets, tetrahedra, icosahedra, and others.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.3
• /
• pp.243-248
• /
• 2013

Primary retroperitoneal mucinous cystadenocarcinoma is a very rare malignancy. To date, 51 cases have been reported, including 3 in pregnant women. Herein, we report magnetic resonance findings of a 31-year-old Korean woman (15 weeks and 3 days pregnant) with primary retroperitoneal mucinous cystadenocarcinoma. On abdominal magnetic resonance imaging (MRI), a mass was identified in the retroperitoneal area with a nodular lesion showing heterogeneous signal intensity and focal wall thickening on T1- and T2-weighted images. Exploratory laparotomy and tumor excision were performed. Histological examination revealed primary retroperitoneal mucinous cystadenocarcinoma. The patient subsequently underwent total hysterectomy, bilateral salpingo-oophorectomy, and omentectomy for metastatic mucinous cystadenocarcinoma of both ovaries 15 months after her initial surgery.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.98-105
• /
• 2008

FlexRay is a high-speed communications protocol with high flexibility and reliability. It was devised by automotive manufacturers and semiconductor vendors and implemented as on vehicle LAN protocol using x-by-wire systems. FlexRay provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for automotive applications. In this paper, we first design the FlexRay communication controller, bus guardian protocol specification and function parts using SDL (Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay system was synthesized using Samsung $0.35{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 76 MHz. In addition, to show the validity of the designed FlexRay system, the FlexRay system is combined with automobile advance alarm system in vehicle applications. The FlexRay system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.342-347
• /
• 2017

Since the first report of the oak wilt disease at 2004 in Korea, the disease distributed over Korean peninsula and are still giving severe damages. The management of oak wilt disease in Korea has mainly focused on the control of insect vector, Platypus koryoensis. Neverthless the effective method for evaluating the pathogenicity of the pathogen, Raffaelea quercus-mongolicae (Rqm), and for screening chemical or biological agents with strong inhibitory activity against the pathogen, is absolutely necessary, an reliable method is not available so far. This study was conducted to develop the effective method for evaluating the pathogenicity of Rqm in oak trees. The culture suspensions of Rqm were artificially injected to the saplings of Quercus acutissima by using ChemJet tree injector. Three months after treatments, the treated saplings were cut and dipped into 1% fuchsin acid solution. There were significant differences in non-conductive area (%), discoloration area (%) and vertical discoloration length between the pathogen-injected and distilled water-injected control treatments. These results indicated that the pathogen is the causal agent for the dysfunction of water conductive tissue, which will finally result in wilt symptom. Re-isolation of the pathogen and PCR detection using specific primers for the pathogen also confirmed the presence of Rqm in the sapwood chips of the pathogen-injected saplings. These observations would be greatly applied to other related researches for evaluating the pathogenicity of tree wilt pathogens and biocontrol efficacy of the selected antagonistic microorganisms, in case that the wilt symptom is not easily shown by artificial inoculation of the causal agent.