• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.59-65
• /
• 2005

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.35-40
• /
• 2010

Variations in hexeneuronic acid content in hardwood alkaline pulps were investigated to evaluate their contribution to kappa number. Out of diverse chemical pulps the highest hexeneuronic acid content were measured in yellow poplar kraft pulping, which was assumed to enhance ca. 7.0 of kappa number determined by acid permanganate consumption. In yellow poplar soda-anthraquinone pulping, hexeneuornic acid was contributed to increment of 5.0-6.0 kappa number. In eucalyptus alkaline pulping, hexeneuronic acid content was not significantly different from soda-anthraquinone pulping. Increment of Kappa number by hexeneuronic acid was 4.5-5.6 depending on pulping method and pulping time at target temperature.

• Applied Microscopy
• /
• v.43 no.3
• /
• pp.110-116
• /
• 2013

Effects of elevated air temperature and carbon dioxide ($CO_2$) concentration on the leaf surface structures were investigated in Liriodendron tulipifera (yellow poplar) and Populus tomentiglandulosa (Suwon poplar). Cuttings of the two tree species were exposed to elevated air temperatures at $27/22^{\circ}C$ (day/night) and $CO_2$ concentrations at 770/790 ppm for three months. The abaxial leaf surface of yellow poplar under an ambient condition ($22/17^{\circ}C$ and 380/400 ppm) had stomata and epicuticular waxes (transversely ridged rodlets). A prominent increase in the density of epicuticular waxes was found on the leaves under the elevated condition. Meanwhile, the abaxial leaf surface of Suwon poplar under an ambient condition was covered with long trichomes. The leaves under the elevated condition possessed a higher amount of long trichomes than those under the ambient condition. These results suggest that the two poplar species may change their leaf surface structures under the elevated air temperature and $CO_2$ concentration condition for acclimation of increased photosynthesis.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.810-817
• /
• 2015

This study was conducted to evaluate the pressure treatment characteristics of yellow poplar skin timber with ACQ-2, CUAZ-3, and CuHDO-1. The effect of moisture content (MC) on treatability was investigated, and fixation characteristics of copper-based preservatives were also evaluated. Sapwood of yellow poplar, which was dried below 50 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring retention gradient in yellow poplar sapwood, it was confirmed that minimum requirement of preservative retention for the hazard class H3 was achieved in the assay zone from the surface to 15 mm-depth when the specimens were dried below 30 percent MC. Yellow poplar heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. The fixation rate of copper was much faster under drying condition compared with nondrying condition; more than 90% of copper were fixed in 3 weeks at $21^{\circ}C$ under drying conditions.

• Journal of Forest and Environmental Science
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2010

In an effort to evaluate the qualities of the unused woods designed for art materials, Yellow pine, Pitch pine, Suwon poplar, Platanus and Cherry grown in Korea has been investigated in the study. Physical and mechanical properties such as density, hardness, roughness, and abrasion of the woods were examined. Among the five species, Cherry wood showed the highest density in green, air-dried and oven-dried conditions. Hardness of Cherry wood was higher than those of Suwon poplar and Platanus. In softwoods, Pitch pine showed greater hardness than Yellow pine. Yellow pine and Platanus had the highest values of wood surface roughness. Abrasion value of cross, radial and tangential sections was the highest in Yellow pine and Suwon poplar. It has been concluded from the experiment that physical and mechanical properties such as density, hardness, roughness, and abrasion of the woods can be used as an indicator of the suitability for woodcraft material.

• The Korean Journal of Ecology
• /
• v.17 no.2
• /
• pp.131-141
• /
• 1994

One-year-old yellow-poplar (Liriodendron tulipifera L.) and sweetgum (Liquidambar styraciflua L.) seedlings were exposed to 0.10 ${\mu}l/l\;O_3$and simulated acid rain at pH 3.0 for ten consecutive weeks. Shoot height growth (SHG), fresh weight (FWT), dry weight (DWT), apparent plastochron duration (APD) and foliar nutrient concentrations were measured. None of growth measurements, except the apparent plastochron duration (APD), were significantly affected by any treatment in yellow-poplar seedlings. APD was approximately 30% higher in seedlings exposed to $0.1{\mu}l/l\;O_3$ ＋ pH 5.6 solution than any other treatment. Ozone significantly reduced SHG of sweetgum seedlings by 24% at the end of the ten-week fumigation. There were also significant effects of single and combined effects of ozone and simulated acid rain on APD in sweetgum. APD was significantly increased by 19.8% and 25.7% in seedlings exposed to $0.1{\mu}l/l\;O_3$ and pH 5.6 solution, respectively, and resulted in 46.1% higher APD in seedlings exposed to $0.1{\mu}l/l\;O_3$ + pH 5.6 solution compared with seedlings exposed to $0.0{\mu}l/l\;O_3$ ＋ pH 3.0 solution. Phosphorus and sulphur were significantly greater in seedlings exposed to simulated rain at pH 3.0 compared with pH 5.6 for both species. Foliar S concentration was higher in seedlings exposed to $0.0{\mu}l/l\;O_3$ ＋ pH 3.0 than in seedlings exposed to any other treatment in sweetgum. Ozone significantly increased Ca in sweetgum seedlings, however, ozone reduced Ca in yellow-poplar. Ozone also reduced S and Mg in sweetgum seedlings.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.706-710
• /
• 2010

Understanding of chemical composition and energy contents in tree is important to develope strategies of renewable energy policy to cope with climate change. Residual biomass as renewable energy source was evaluated and focused on the bark-containing branches. Chemical analysis studies were conducted for different part of yellow poplar (Liriodendron tulipifera), which were partitioned to inner bark, outer bark, small branches, medium branches, big branches and trunk. The variations in hydrophobic extractives, hydrophilic extractives, lignin, carbohydrate compositions, energy contents (higher heating value) and the ash content were determined. The inner and outer bark had higher ash content, hydrophobic and hydrophilic extractives content, and higher energy content than those of tree trunk. Polysaccharides content in inner and outer bark was quite lower than those of stem or branches. Based on the energy content of residual biomass, replacement of fossil fuel and greenhouse gas emission abatement were calculated.

• Landscaping Tree
• /
• s.129
• /
• pp.14-19
• /
• 2012

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.166-171
• /
• 2016

Size reduction is one of the major pre-processing operations in using biomass as a source of energy or raw materials for forest products industry. The grinding characteristics of dried yellow poplar wood chips were investigated using laboratory knife mill with three different screen aperture diameters to provide the basic information for the optimizing of size reduction processes in biomass industry. Average specific energy consumptions were 0.157, 0.137, and 0.093 Wh/g for the screen aperture diameters of 5.0, 7.5, and 9.0 mm, respectively. According to the results of size distribution analysis of ground particles, the sizes of the most of ground particles were much smaller than the aperture diameters of the screens installed on knife mill used in this study.

• Korean Journal of Plant Resources
• /
• v.21 no.3
• /
• pp.222-225
• /
• 2008

Chemical composition and enzymatic saccharification characteristics of hemp woody core were investigated by their chemical composition analysis and enzymatic saccharification with commercially available cellulases (Celluclast 1.5L and Novozym 342). Hemp woody core have higher xylan and lower lignin contents than its bast fiber. Based on hemicelluloses and lignin composition, hemp woody core is similar with hardwood biomass. However, cellulose was more easily converted to glucose than xylan to xylose and this trend was confirmed both hemp woody core and yellow poplar. Hemp woody core biomass shows higher saccharification than yellow poplar (hardwood biomass) based on cellulose and xylan hydrolysis. With easier enzymatic saccharification in cellulose and xylan, and similar chemical composition, hemp woody core have better biorefinery feedstock characteristics than hardwood biomass.