• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.332-340
• /
• 2019

Due to the change in lifestyle, new sensible materials for sportswear and outdoor are needed. This study is conducted in order to obtain the data for sensible materials through nylon twist process. 1-step nylon twisting machine was used to set the optimum twist process. DSC measurements of twisted nylon yarn showed crystallization temperatures around 170℃ and melting temperatures around 220℃. Nylon 40D/13F DTY and Nylon 50D/48F DTY showed optimal results at 160℃, 1,500 T/M(Turns per meter), and Nylon 70D/68F DTY at 160℃, 1,200 T/M(Turns per meter) after 1-step twist process. Also, Nylon 40D/13F DTY was confirmed to have inter-layer property deviation of ±5 percent.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.122-125
• /
• 2003

Easy-care성을 장점으로 하여 천연섬유 대체용으로 점차 차별화가 진행되며 개발된 PET 섬유는 범용적인 섬유특성으로 인해 의류ㆍ비의류용 분야에서 광범위한 소재로 많이 사용되고 있다. 고부가가치의 직물을 생산하기 위해서는 원사의 특성뿐만 아니라 원사 이후의 공정 특히 사가공공정에서의 각공정에 따른 絲의 물성을 파악하는 것이 중요하다. 원사를 가연하는 공정 중 최근 disk spindle과 큰축을 이루고 있는 belt 가연기구는 높은 생산속도와 균일한 가공사를 생산할 수 있어 많이 사용하고 있다. (중략)

• Textile Coloration and Finishing
• /
• v.8 no.4
• /
• pp.42-51
• /
• 1996

Alkaline hydrolysis to improve the hand of PET/acetate union fabric was studied in relation to skin saponification and retarding effect of salts on the alkaline hydrolysis of cellulose acetate fiber, accelerating effect of salts on the alkaline hydrolysis of PET fiber, and changes of total hand value(T.H.V) of PET/acetate union fabric treated with alkali/salt solution. It was found that the rate of saponification of acetate was delayed by the addition of salts such as LiCl, NaCl and CH$_{3}$COONa into NaOH solution below 10 minutes. The rate of shrinkage of acetate fabric treated with 5g/l NaOH solution at 9$0^{\circ}C$ and 60 minutes showed 20 % but it was decreased 8% by. the addition of 120g/l Concentration of inorganic salts. We could know that the rate of alkaline hydrolysis of filament yarn treated with alkali solution at 9$0^{\circ}C$ and 60 minutes was delayed about 3 % using 2,000T/M of hard twist yarn, especially acetate filament treated with alkali solution at 9$0^{\circ}C$ and 10 minutes was delayed about 10%. T.H.V. of PET/acetate union fabric was increased from 2.77 to 3.04~3.18 by the addition of salts into alkali solution.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2021

In this study, we investigated the necessary mechanical properties of conductive multifilament yarns for fabricating the electrodes of biosignal measurement pressure and stretch textile sensors using embroidery. When electrodes and circuits for smart wearable products are produced through the embroidery process using conductive multifilament yarns, unnecessary material loss is minimized, and complex electrode shapes or circuit designs can be produced without additional processes using a computer embroidering machine. However, because ordinary missionary threads cannot overcome the stress in the embroidery process and yarn cutting occurs, herein, we analyzed the S-S curve, thickness, and twist structure, which are three types of silver-coated multifilament yarns, and measured the stress in the thread of the embroidery simultaneously. Thus, the required mechanical properties of the yarns in the embroidery process were analyzed. In the actual sample production, cutting occurred in silver-coated multifilament rather than silver-coated polyamide/polyester, which showed the lowest S-S curve. In the embroidery process, the twist was unwound through repetitive vertical movement. Further, we fabricated a piezoresistive pressure/tension sensor to measure gauge factor, which is an index for measuring biological signals. We confirmed that the sensor can be applied to the fabrication of embroidery electrodes, which is an important process in the mass production of smart wearable products.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.820-828
• /
• 1999

The purpose of this study was to investigate the changes of pore area and water vapour transport by the changes of moisture regain and fabric structure of wool fabrics, As specimens 4 worsted wool fabrics were used. The pore area were measured by image analysis method and dinamic vapour transport and water reisitance was determined by clothing-environment-body modelling system. The pore area was changed by the moisture regain of wool fabrics. The change of pore area was influenced by the yarn twist thread count and cover factor and the weave type. The water vapour transport was changed by the moisture regain. The change of water vapour transport was influenced by the change of pore aree which was determined by image analysis.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.33-38
• /
• 2003

This study surveys the effects of POY physical properties and processing conditions of belt texturing machine to the textured yarns. The various textured yarns are made with the variations of 1st heater temperature, draw ratio, velocity ratio, and the physical properties of these specimens such as yam linear density, tenacity, breaking strain, and wet and dry thermal shrinkages are measured and analysed with the various processing conditions of texturing machine. Especially, the thermal characteristics of the textured yarns, which are affected at the fabric hands and the determination of the processing conditions in the dyeing and finishing processes, are investigated through the thermal stress analyser and DSC experiments.

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2004

PET yarns textured at different texturing conditions were treated with superheated steam or dry heat at different temperatures for different times. The effects of the treatment conditions on the thermomechanical and structural changes of the yarn were examined by shrinkage, X-ray diffraction and birefringence measurements. With increase in superheated steam temperature, the crystalline orientation factor and birefringence decreased, whereas crystal size increased. Dry heat treatment had a smaller effect on shrinkage and structural properties in comparison with superheated steam treatment. The additional shrinkage after texturing process was investigated. The effect of heat-setting in both media was more significant at $200^{\circ}C$. The time dependence of the properties was not linear.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.161-168
• /
• 2003

An investigation of the dimensionless torque in the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by the passing yarn without a special driving device. This research is composed of the theoretical analysis of the false twisting mechanism and the experimental analysis at room temperature. The equations have been derived which shows interrelationship of the conical angle of cone drum, the wrapping angle, the drag angle, and the yam helix angle. Theoretical values of dimensionless torque were calculated and were compared with the experimental results. It is shown that, as the conical angle and the projected wrapping angle increased, the dimensionless torque also increased. But the conical angle was reached to ${30.75}^{\circ}C$, the dimensionless torque decreased.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2004

This research surveys the twisting and untwisting tensions according to the various processing conditions of belt type texturing such as draw ratio, 1st heater temperature and velocity ratio. The 1st heater temperature was changed from 1606{\circ}C\; to\; 220^{\circ}C$, draw ratio was changed from 1.6 to 1.9 and velocity ratio was changed from 1.4 to 1.8. The twisting and untwisting tensions are measured with the variation of these processing conditions, in addition, the untwisting tension(T2) and tension ratio(T2/Tl) according to the various processing conditions are analysed with the false twist mechanism which is affected to the physical properties of draw textured yams.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.151-155
• /
• 2005

A twisting machine is to twist yarns for improving yam strength. After twisting yams, the twisting machine winds yams into a bobbin. The traverse mechanism is very important part of winding mechanism. Because it performs uniform winding onto the bobbin. the traverse cam is the main part of the traverse mechanism. This paper proposes design method of the traverse cam using the relative velocity method [4,5]. The relative velocity method is used to calculate the relative velocity of the follower versus the cam at the center of roller, and then to determine the contact point using the geometric relationship and kinematical constraints. Finally, we present examples verifying the accuracy of the proposed methods.