• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.85-92
• /
• 1997

Flammability of non-flame-retardant and flame-retardant materials was studied by using cone calorimeter Also, relations between the results obtained by using cone calorimeter and those obtained by the flammability test of japanese fire Service Law were examined. The results are as follows: 1) The ignition time of the molten specimens is relatively long, whereas the ignition time of the non-molten specimens is short. None of remarkable difference of the ignition time has been found between non-flame-retardant and flame-retardant materials specimens. 2) The peak heat release rates of flame-retardant materials are smaller than those of non-flame- retardant materials. 3) The carbon monoxide and smoke evolved from flame-retardant materials generate much more than those evolved from non-flame-retardant materials. 4) Even if flame-retardant materials are passed by the flammability test of Japanese Fire Service Law, they burn easily under external radiative heating condition.

• International Journal of Reliability and Applications
• /
• v.4 no.1
• /
• pp.1-12
• /
• 2003

Many software reliability growth models (SRGM's) based on a nonhomogeneous Poisson process (NHPP) have been proposed by many researchers. Most of the SRGM's which have been proposed up to the present treat the event of software fault-detection in the testing and operational phases as a counting process. However, if the size of the software system is large, the number of software faults detected during the testing phase becomes large, and the change of the number of faults which are detected and removed through debugging activities becomes sufficiently small compared with the initial fault content at the beginning of the testing phase. Therefore, in such a situation, we can model the software fault-detection process as a stochastic process with a continuous state space. In this paper, we propose a new software reliability growth model describing the fault-detection process by applying a mathematical technique of stochastic differential equations of an Ito type. We also compare our model with the existing SRGM's in terms of goodness-of-fit for actual data sets.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.167-168
• /
• 2016

• Steel and Composite Structures
• /
• v.32 no.4
• /
• pp.497-507
• /
• 2019

Exposed column base connections are used in low- to mid-rise steel moment resisting frames. This paper is to investigate the effect of the base plate thickness on the exposed column base connection strength, stiffness, and energy dissipation. Five specimens with different base plate thickness were numerically modelled using ABAQUS software. The numerical model is able to reproduce the key characteristics of the experimental response. Based on the numerical analysis, the critical base plate thickness to identify the base plate and anchor rod yield mechanism is proposed. For the connection with base plate yield mechanism, the resisting moment is carried by the flexural bending of the base plate. Yield lines in the base plate on the tension side and compression side are illustrated, respectively. This type of connection exhibits a relatively large energy dissipation. For the connection with anchor rod yield mechanism, the moment is resisted through a combination of bearing stresses of concrete foundation on the compression side and tensile forces in the anchor rods on the tension side. This type of connection exhibits self-centering behavior and shows higher initial stiffness and bending strength. In addition, the methods to predict the moment resistance of the connection with different yield mechanisms are presented. And the evaluated moment resistances agree well with the values obtained from the FEM model.

• Wind and Structures
• /
• v.28 no.5
• /
• pp.331-345
• /
• 2019

Long-span bridge decks are often shaped as streamlined to improve the aerodynamic performance of the deck. There are a number of important shaping parameters for a streamlined bridge deck. Their effects on aerodynamics should be well understood for shaping the bridge deck efficiently and for facilitating the bridge deck design procedure. This study examined the effect of various shaping parameters such as the bottom plate slope, width ratio and side ratio on aerodynamic responses of single box streamlined bridge decks by employing unsteady RANS simulation. Steady state responses and flow field were analyzed in detail for wide range of bottom plate slopes, width and side ratios. Then for a particular deck shape Reynolds number effect was investigated by varying its value from $1.65{\times}10^4$ to $25{\times}10^4$. The aerodynamic response showed very high sensitivity to the considered shaping parameters and exhibited high aerodynamic performance for a particular combination of shaping parameters.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.10
• /
• pp.105-113
• /
• 2022

The purpose of this paper is to analyze the relationship between the ratio of non-controlling shareholder interests (minority equity ratio, MER) and the measurement error in real activities manipulation (RM) proxy for Japanese firms. Many Japanese firms have practiced stakeholder-oriented corporate governance systems. Previous studies suggest that the higher the MER, the more Japanese businesses tend to employ management techniques for the group's sales growth while also reallocating resources inside the group to reduce principal-principal conflicts. Such differences in management strategies by firms could lead to measurement error in the RM proxy. The analysis uses 16,450 firm-years listed on the Tokyo Stock Exchange. The results of our analysis show that there is a positive relationship between MER and the RM proxy, and high persistence of RM proxies, suggesting that the RM proxies may contain measurement error. We also find that MER is correlated with variables associated with management strategy and that controlling for these variables can reduce the measurement error of RM proxy in firms with large MER. This study extends previous research on measurement error in RM proxy by relating them to ownership structure and corporate governance. This paper would contribute to researchers examining issues related to RM.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2386-2394
• /
• 2022

In this paper, smooth and notched bar tensile tests of austenitic stainless steel 304 are performed, covering four different multi-axial stress states and six different strain rate conditions, to investigate the effect of the stress triaxiality and strain rate on fracture strain. Test data show that the measured true fracture strain tends to decrease with increasing stress triaxiality and strain rate. The test data are then quantified using the Johnson-Cook (J-C) fracture strain model incorporating combined effects of the stress triaxiality and strain rate. The determined J-C model can predict true fracture strain overall conservatively with the difference less than 20%. The conservatism in the strain-based acceptance criteria in ASME B&PV Code, Section III, Appendix FF is also discussed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.4
• /
• pp.601-608
• /
• 2023

Homomorphic encryption is a promising technology that has been extensively researched in recent years. It allows computations to be performed on encrypted data, without the need to decrypt it. In this paper, we perform bibliometric analysis to objectively and quantitatively analyze the research trends of homomorphic encryption technology using 6,047 homomorphic encryption papers from the Scopus database. Specifically, we analyze the number of papers by year, keyword co-occurrence, topic clustering, changes in related keywords over time, and country of homomorphic encryption research institutions. Our analysis results provide strategic directions for research and application of homomorphic encryption and can be a great help for subsequent research and industrial applications.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.51-54
• /
• 2002

We propose a novel mechanism (Twist Sharing Mechanism) for the cis-trans photoisomerization of rhodopsin, based on the molecular dynamics (MD) simulation study. New things devised in our simulations are (1) the adoption of Mt. Fuji potentials in the excited state for twisting of the three bonds C9=C10, C11=C12 and C13=14 which are modeled using the detailed ab initio quantum chemical calculations and (2) to use the rhodopsin structure which was resolved recently by the X-ray crystallographic study. As a result, we found the followings: Due to the intramolecular steric hindrance between 20-methyl and 10-H in the retinal chromophore, the C12-C13 and C10-C11 bonds are considerably twisted counterclockwise in rhodopsin, allowing only counterclockwise rotation of the C11 =C12 in the excited state. The movement of 19-methyl in rhodopsin is blocked by the surrounding three amino acids, Thr 118, Met 207 and Tyr 268, prohibiting the rotation of C9=C10. As a result only all-trans form of the chromophore is obtainable as a photoproduct. At the 90$^{\circ}$ twisting of C11=C12 in the course of photoisomerization, twisting energies of the other bonds amount to about 20 kcal/mol. If the transition state for the thermal isomerization is assumed to be similar to this structure, the activation energy for the thermal isomerization around C11=C12'in rhodopsin is elevated by about 20 kcal/mol and the thermal isomerization rate is decelerated by 10$\^$-14/ times than that of the retinal chromophore in solution, protecting photosignal from the thermal noise.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.455-460
• /
• 1998

In the course of screening for new antitumor substances, a novel cytotoxic agent inducing apoptotic cell death was isolated from the culture broth of marine bacterial strain SCRC A-20. Strain SCRC A-20 was separated from a mollusk and was chemotaxonomically identified as a Streptomyces sp. The cytotoxic substance was purified by organic solvent extraction followed by silica gel column chromatography and preparative TLC. HRFAB-MS determined its molecular formula to be $C_{30}H_{40}N_2O_5$ (MW 508). The 1D and 2D NMR spectral data demonstrated that the substance has a novel lactam structure of a 20-membered macrocycle coupled with a unique acyl tetramine and bicyclo［3.3.0］ octane, which includes three methyl groups, six olefinic protons, five carbonyl groups, a conjugated diene and a dienone. The substance, named aburatubolactam C, appeared to be cytotoxic for various continuously proliferating tumor cells of human and murine origins. The $IC_{50}$ values determined by MIT assay were in the range of 0.3 to $5.8\mug/ml$. When Jurkat T cells were treated with $3\mug/ml$. of aburatubolactam C, the apoptotic DNA fragmentation was detectable within 3 h, indicating that the cytotoxic effect of aburatubolactam C on tumor cells is attributable to the induced apoptosis.