• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.584-589
• /
• 2000

We fabricated resistive superconducting fault current limiters (SFCL) based on YBCO thin films grown on a 2-inch diameter Al2O3 substrate. The current limiting element was 1 mm wide and 260mm long meander line prepared by standard photolithography. The minimum quench current of the current limiting element was about 8 Apeak. This SFCL sucessfully controlled the fault current below 14.3 Apeak at the voltage of 100 Apeak which is otherwise to increase up to 141 Apeak. The quench completion time was less than 3 msec. The temperature of the current limiting element rose to about 200 K in 3 cycles after fault. The SFCL showed reproducible quench during hundreds times of repeated experiments.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.138-141
• /
• 1999

For the enhancement of communication system performance, high quality filters are required. Conventional metal filters made of copper can be substituted by high quality high temperature superconductivity(HIS) flms for better performance. In order to reduce the size of the filter for the integration of device in the limited area, we have fabricated hairpin type filters using pulsed laser deposition(PLD) technique. The superconducting YBCO thin films have been grown on MgO substrates by PLD with Nd:YAC laser. The YBCO films were patterned by conventional wet-etching process. We have compared YBCO filters and copper filters which were made with the same spec. Simulated and measured frequency responses reveal that HIS YBCO hairpin type bandpass filters show better performance than copper filters.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.252-256
• /
• 2000

We investigated resistance development in Au/YBCO thin film meander lines during quench. The meander lines were fabricated by coating YBCO films insitu with a gold layer and patterning them by photolithography. The center stripe quenched fastest even though the flux flow resistance that appeared upon the current passing the critical current was uniform. Quench started at an area of the center stripe and propagate both through the gold layer and the sapphire substrate. Quench propagation speed was uniform and 60 cm/s at 30 V$_{rms}$.

• 한국재료학회지
• /
• 제1권1호
• /
• pp.54-61
• /
• 1991

$YBa_2Cu_3O_{7-\delta}$ 단일 타게트를 사용하여 R. F. 마그네트론 스퍼터링법으로 MgO(100), Si(100)기판 위에 박막을 증착한 후, $880^{\circ}C$의 산소 분위기에서 1시간 동안 열처리를 하였다. 열처리 전 박막의 미세한 조성변화에 의해서도 열처리 후 박막의 미세구조 및 전기적 특성은 크게 변화했다. MgO(100)기판의 표면에 성장되는 입자들은 선택 배향적으로 성장하려는 경향을 가지므로 가늘고 길쭉한 입자 형상을 띠는 반면에 이들 입자위에 성장되는 다른 입자들은 결정 성장 방향의 선호도가 없으므로 둥근 모양의 입자형상을 가진다. 열처리 전 박학의 조성이 1-2-3을 벗어나면 증착 후 열처리할 때 액상이 형성되며, 액상의 양이 많을수록 선택 배향적 성장이 용이해져 texture를 쉽게 이룬다. 그러나 이러한 액상은 냉각 시에 초전도입자의 입계에 이차상으로 형성되기 때문에 초전도 박막의 전기적 특성, 특히 임계온도를 저하시킨다. 또한 $T_{c,\;zero}$는 $T_{c,\;on}$에 비해서 입계에 형성되는 이차상의 영향을 더 크게 받는다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.92-92
• /
• 2003

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.57-57
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.95-95
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.78-78
• /
• 2007

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.794-797
• /
• 2000

The fabrication of high quality superconducting thin films using pulsed laser deposition (PLD) has been reported to find optimized processing conditions and to make the millimeter-wave devices. High temperature superconducting (HTS) YBCO films were prepared on MgO (10${\times}$10${\times}$0.5mm) substrates by the PLD. The 3 pole bandpass filter with the center frequency of 22 GHz for satellite communication was designed consisting of hairpin coupled-lines to reduce the configuration in size. YBCO films are c-axis oriented and show superconductive transition temperatures of 88∼89 K with the transition widths < 0.5 K. The insertion loss of passband at 70 K was about 5 dB. The measured frequency response of superconducting filter will be compared with the simulation result.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.437-442
• /
• 1996

High quality $YBa_2Cu_3O_y$(YBCO) thin films for directly coupled dc superconducting quantum interference device (SQUID) were fabricated by pulsed laser deposition. Several critical parameters have been optimized through systematic studies. Thus, the films showing the $T_c$ of above 91K and $J_c$ of above$2\times10^6A/cm^2$ at 77K were routinely obtained. Extensive AFM and X-ray diffraction studies have been conducted for morphological and structural analyses. The directly coupled DC-SQUIDs were fabricated from the YBCO thin films deposited on $SrTiO_3$ bicrystals under the optimized conditions. The measurement on $2I_c$ and swing voltage give 200$\mu$A and 17$\mu$V at 77K, respectively.