• 한국가시화정보학회:학술대회논문집
• /
• 2004.12a
• /
• pp.33-40
• /
• 2004

A 4D-PTV system was constructed. The measurement system consists of three high-speed high-definition cameras(1k x 1k, 2000fps), Nd-Yag laser(2000Hz) and a host computer. The GA-3D-PTV algorithm was used for completing the measurement system. The 4D-PTV is capable of probing the spatial distribution of velocity vectors of the flow field overcoming the temporal resolution of the characteristic turbulence length scales of the measured flow fields. A horizontal impinged jet flow (H/D=7) was measured. The Reynolds number is about 33,000. Spatial temporal evolution of the jet flow was examined and physical properties such as spatial distributions of vorticity and turbulent kinetic energy were obtained with the constructed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1061-1067
• /
• 2005

The resonant frequency modulation of $YBa_2Cu_3O_{7-x}$ meander lines has been investigated as functions of optical pulse energy and temperature by using a network analyzer. The frequency-domain measurements are performed by controlling both the resonant frequency and the frequency width. The meander lines, configured in a microstrip geometry, are illuminated by optical pulses from an actively mode-locked Nd:YAG laser. The variation of the resonant frequency shows a quadratic dependence on the reduced optical pulse energy $P/P_c$, where $P_c$ is defined as the critical optical pulse energy at which resonance signal has disappeared. As for the dependence on temperature, the results are in good agreement with the previously reported data.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1905-1907
• /
• 1997

The experiments of laser-guided de discharge were carried out by using pulsed Nd:YAG laser radiation at low air pressure ranging from 0.3 to 20 torr. The minimum laser-guided de discharge voltages($V_{MD}$) at given pressure and distances between anode and cathode electrode were obtained. In order to generate TEM(transverse electromagnetic waves) modes, a pinhole was installed between a rod and a half mirror, and its diameter was adjusted from 6mm to 1.7mm. And then, we investigated the characteristics of laser-guided de discharge corresponding to different TEM modes. As a result, it was found that $V_{MD}$ at $TEM_{00}$ mode was lower than $V_{MD}$ at multimodes.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.239-243
• /
• 1992

We have investigeted the interference phenomena of the second harmonic waves of Nd:YAG laser generated at KDP single crystals and the nitrogen CARS signals. To get the phase difference between the successively generated nonlinear optical signals, a phase shifting unit made of BK-7 glass and a high pressure gas cell are used. Coherence lengths of several samples for the nonlinear signals are measured. Adjusting the thickness of the phase shifting unit where the CARS signals make destructive interference completely, the CARS spectrum of nitrogen suppressed over wide wavelength range is obtained. Also, we have observed the change in degree of suppression of the spectrum for the variation of the thickeness of the phase shifting unit.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.25-35
• /
• 1997

현재, 표면개질에 주로 많이 사용되는 레이저는 세 종류로서, C $O_{2}$$laser(파장길이:10.6.\mum),$ Nd:YAG(neodymium-doped yettrium aluminum garnet) $laser(파장길이:1.06.\mum)$ 및 excimer laser(157~350nm) 등이다. 이 외에도 초기에는 ruby레이저빔이 사용되기도 하였으나, 현재는 많이 사용되고 있지 않다. 레이저 빔에 의한 표면개질에는 몇가지 장점이 있는데, 이러한 장점은 주로 급속가열과 급속냉각 효과에 기인하는 것이다. 즉, 1) 급냉효과에 의한 미세한 결정입자 형성, 2) 불안정상 (metastable phase) 또는 비정질 상 생성, 3) 열역학적 용해도 보다 높은 용해도. 4) 편석이 없는 균질한 미세조직, 5) 극히 낮은 기공도, 6) 좁은 열영향 부위, 7) 표면층과 모재 사이의 높은 결합력 등이다. 이 외에도 공정상의 장.단점들이 Ref.5, 6에 잘 요약 정리되어 있다. 지금까지 국내에서 레이저 표면개질에 대한 조사가 몇몇 있었으나, 본 조사에서는 보통 많이 다루어지지 않은 부분, 즉 충격경화 및 표면제어에 비중을 두었으며, 비용융 부분(I)과 용융부분(II)을 분리하여 정리하였다.

• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.50-54
• /
• 2014

In this paper we studied the laser-induced crater depth, mass, and emission spectra of laser-ablated high-density polyethylene (HDPE) polymer using the laser-induced plasma spectroscopy (LIPS) technique. This study was performed using a Nd:YAG laser with 100 mJ energy and 7 ns pulse width, focused normal to the surface of the sample. The nanoscale change in ablated depth versus number of laser pulses was studied. By using scanning electron microscope (SEM) images, the crater depth and ablated mass were estimated. The LIPS spectral intensities were observed for major and minor elements with depth. The comparison between the LIPS results and SEM images showed that LIPS could be used to estimate the crater depth, which is of interest for some applications such as thin-film lithography measurements and online measurements of thickness in film deposition techniques.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.29-33
• /
• 2010

Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.252-253
• /
• 2000

본 실험에서는 수 MW/$ extrm{cm}^2$ 의 매우 낮은 영역의 세기에서 순수한 GaAs의 bulk에 대하여 실험한 결과 비선형 흡수가 나타남을 관찰 하였으며, 더불어 자유전하 흡수 계수를 여러 가지 세기의 빛에서 측정한 결과 자유전하 흡수 단면적이 빛의 세기에 따라 변화하는 것을 관찰하였다.$^{(1)}$ GaAs의 굴절률이 3.6으로 매우 커서 Fabry-Perot 효과가 나타나므로 시료의 한쪽 면을 SiN로 무반사 코팅을 하여 실험 하였다. GaAs의 표면은 쉽게 레이저 빛에 의해 손상을 입는 것을 고려하여 같은 자리에서 여러 번의 실험을 하여 같은 결과가 나오는 것을 확인하여 실험 결과를 얻었다. 사용된 레이저는 Nd:YAG 레이저로서 1.064 $mu extrm{m}$의 파장에서 7 나노초의 펄스를 방출한다. 빛의 세기는 편광기와 half wave plate를 이용하여 변화 시켰다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.154-154
• /
• 2000

FED(Field emission display)의 FEAs(Field emitter arrays)에 형성되어 있는 micro-tip 은 tip 표면의 오염이나 진공내부의 잔류가스에 대단히 민감하다. 특히, emitter 물질의 일함수 및 겉모양 같은 기하학적 요소에 민감한 전계방출 소자의 특성상 tip 선단이 oxidation 될 경우 일함수가 증가하여 전자방출에 필요한 구동전압이 증가하고 전자 방출의 불균일성이 커지는 문제점이 발생한다. 이에 고진공의 동작 환경 및 FEAs 제작과정이나 공기의 노출에 발생하는 tip 표면의 오염물질 제거가 요구된다. 따라서 본 연구에서는 40$\times$40mm2 FEAs에 laser power, scan speed을 달리하며 laser(cw Nd-YAG, 1064nm)을 조사하였다. laser cleaning 효과를 보기 위해 laser irradiation 전, 후에 진공도 5$\times$10-7torr irradiation 후에 emitter tip의 뚜렷한 기하학적 모양의 변화를 볼 수는 없었지만, I-V 특성이 향상 되는 것을 볼 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.268-270
• /
• 2013

It is well known that tire pattern design factors have a large influence on overall tire performance. In this paper, the basic study on the effects of tire pattern design factors on tire labeling performance has been carried out through experimental tests. The pass-by noise is affected by tire pattern design, by a maximum of 2.7dB(A), and the number of sipes gives large effects on PBN. The rolling resistance is also influenced, mostly by the number of longitudinal grooves and secondly the number of sipes. Finally, there is a weak correlation between PBN and RR when the pattern design factors are changed.