• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.450-455
• /
• 2015

For the practical application of a YBCO superconductor bulk, the superconductor bulk magnet with high magnetic field on a large area surface should be fabricated. To make this, YBCO single crystal bulks with fine $Y_2BaCuO_5$(Y211) particles have been prepared by the top-seed melt growth(TSMG) method with $YBa_2Cu_3O_x$, $Y_2O_3$, and $CeO_2$ mixing precursor. By using $Y_2O_3$ instead of $Y_2BaCuO_5$ as precursor, the manufacturing process became simpler and more economical. The microstructures, trapped field and critical current density of the various conditioned YBCO bulks have been observed, analyzed and measured. The different characteristic values of the several samples have been analyzed from the viewpoint of their microstructures. We have developed a $8{\times}12cm$ size superconductor bulk magnet, up to 3 T class, by using the 4 T class-high field superconducting magnetizer and confirmed the applicability of the transmission level circuit breakers by measuring the strength and speed of the superconductor bulk magnet actuator.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.363-368
• /
• 1999

Y-5a-Cu-O superconductors were prepared by TSMG (Top-Seeded Melt Growth) process with multiseeding technique. By using several seeds at the same time, large samples could be fabricated in a short time with simple heat treatment. However, the samples fabricated by normal multiseeding technique show the rapid decrease of trapped magnetic field value across the grain boundaries because of the residual liquid layer. To remove the residual liquid layer, modified multiseeding was newly suggested. The individual grains were combined as single domain, and did not show deterioration of magnetic property at the boundary. The formation mechanism of a well-combined domain by multiseeding technique was discussed.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.211-216
• /
• 2010

$(NH_4)_{0.3}V_2O_5$ nanorods and $V_2O_5$ nanosheets have been synthesized by the reaction of $V_2O_5$ gel via homogeneous precipitation process employing urea and formic acid. The electrochemical and chemical characteristics of these nanomaterials have been investigated using TGA, SEM, FT-IR, XRD, and LSV. The interlayer distance of $(NH_4)_{0.3}V_2O_5$ was about $10.7{\AA}$, and that of $V_2O_5$ synthesized by using formic acid was $14.2{\AA}$. The surface morphology of $(NH_4)_{0.3}V_2O_5$ and $V_2O_5$ showed features that looked like nanorods and nanosheets, respectively. Specific capacity of $(NH_4)_{0.3}V_2O_5$ nanorods prepared at $95^{\circ}C$ was at least 280 mAh/g at 10 mA/g discharge rate.

• Women's Health Nursing
• /
• v.7 no.2
• /
• pp.203-211
• /
• 2001

A women's meaning about labor and delivery may influence the process of childbirth and performance of the maternal role. Therefore, negative meaning about the birth experience may have a negative impact on the childrearing. The purpose of this study is to explore the meaning of labor and delivery for the strategies of nursing intervention in positive childbirth experience. The data were collected through the in-depth interviews of 10 nursing college women on Jeju Island from October 2000 to January 2001. The interviews were conducted by investigator in the class room after school hours. Each interview lasted for about 30 minutes on average. Subjects were interviewed one at a time. The interviews were recorded with the consent of the subject. The data were analyzed by means of Giorgi's phenomenological analysis methods and catagorized according to the similarities of its contents. The investigator read the data repeatedly to identify the themes and the main meanings. Eight main meanings were identified as follows : 1)pain 2) shame and disgust 3)load 4)naturality 5)unreality 6)happiness 7)anxiety 8)maturity. Under these main meanings there were seventeen themes. I. Pain : (a) It's too painful (b) I don't want to deliver II. Shame and Disgust : (a) I am shameful (b) I am hateful III. Load : (a) I don't feel free (b) I have responsibility IV. Naturality : (a) It's in order to obtain a child (b) It's natural for women (c) It's a destiny of women V. Unreality : I don't feel real VI. Happiness : (a) I am glad (b) I am happy (c) It's miraculous VII. Anxiety : (a) I am anxious (b) I am worried VIII. Maturity : (a) I understand parents (b) I feel great. The results of the study will provide basic data for positive childbirth experience.

• Journal of Korean Academy of Nursing Administration
• /
• v.6 no.2
• /
• pp.211-225
• /
• 2000

With the drastically changing healthcare market, the adoption of DRG system and the use of Critical Pathway will be increased gradually in order to care hospitalized patients qualitatively and manage cost-effectively in Korea. The purpose of this quasi-experimental research is to apply and analyze the developed critical pathway to the patients with Cesarean section. 35 eligible subjects for the control group were chosen from postpartum patients who has delivered at H-hospital in Kwang-ju, and were questioned after appling previous care plan from May to December, 1998. For the experimental group, 37 subjects were chosen and questioned after applying Critical Pathway service from January to June, 1999. The instruments are a critical pathway for the patients with Cesarean section developed by chung(1998) and a questionnaire that evaluate patients and family members' satisfaction level. Also, educational materials were used to inform them in the process of Critical Pathway application. As a result of chi-square test on general characteristics, there is significant difference between control group and experimental group only in terms of room size(p= .010). There are no significant differences in the average length of stay in the hospital between control group and experimental group(t=.078). Also, the average medical consult fee has no difference significantly between two groups(t= .105). The findings showed that the experimental group with critical pathway service scored significantly higher than control group on the satisfaction level toward care services(p=.000). The items are post-operative care, postpartum exercise technique, breast feeding and breast manage through educational materials. In conclusion, the research indicates that the application of planned Critical Pathway can have a positive impact on satisfaction level of inpatients with Cesarian section.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.205-211
• /
• 2020

Wiring defect is a major concern for safe aircraft operations. However, troubleshooting process of a wiring defect is very difficult due to extensive and complex wiring system and installed location. Recently, time domain reflectometer (TDR) equipment that enables effective defected wiring troubleshooting has been introduced. Unfortunately, TDRs have not practically adopted by most of airlines' maintenance departments because the effectiveness and usefulness of TDRs have not been verified. This study was conducted to verify if TDRs can identify the location and type of defected aircraft wiring, and whether they can be applied for troubleshooting purposes. Experimental plan was established by using various wires and connections applied to actual aircraft and the observed results were compared with the TDR operation guide. The usability of the TDR in actual aircraft wiring defect detection may be acceptable as the experimental results showed similar results to the TDR operation guide.

• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.199-211
• /
• 2016

Objective: Given the considerable disagreement between the Peer Assessment Rating (PAR) index and the American Board of Orthodontics Cast-Radiograph Evaluation, we aimed to develop a novel assessment system-the Improvement and Completion of Outcome (ICO) index-to evaluate the outcome of orthodontic treatment. Methods: Sixteen criteria from 4 major categories were established to represent the pretreatment malocclusion status, as well as the degree of improvement and level of completion of outcome during/after treatment: dental relationship (arch length discrepancy, irregularity, U1-SN, and IMPA); anteroposterior relationship (overjet, right and left molar position, ANB); vertical relationship (anterior overbite, anterior open-bite, lateral open-bite, SN-MP); and transverse relationship (dental midline discrepancy, chin point deviation, posterior cross-bite, occlusal plane cant). The score for each criterion was defined from 0 or -1 (worst) to 5 (ideal value or normal occlusion) in gradations of 1. The sum of the scores in each category indicates the area and extent of the problems. Improvement and completion percentages were estimated based on the pre- and post-treatment total scores and the maximum total score. If the completion percentage exceeded 80%, treatment outcome was considered successful. Results: Two cases, Class I malocclusion and skeletal Class III malocclusion, are presented to represent the assessment procedure using the ICO index. The difference in the level of improvement and completion of treatment outcome can be clearly explained by using 2 percentage values. Conclusions: Thus, the ICO index enables the evaluation of the quality of orthodontic treatment objectively and consecutively throughout the entire treatment process.

• Steel and Composite Structures
• /
• v.26 no.2
• /
• pp.197-211
• /
• 2018

The study presents the earthquake performance of the Bosphorus Bridge under multi-point earthquake excitation considering the spatially varying site-specific earthquake motions. The elaborate FE model of the bridge is firstly established depending on the new considerations of the used FEM software specifications, such as cable-sag effect, rigid link and gap elements. The modal analysis showed that singular modes of the deck and the tower were relatively effective in the dynamic behavior of the bridge due to higher total mass participation mass ratio of 80%. The parameters and requirements to be considered in simulation process are determined to generate the spatially varying site-specific ground motions. Total number of twelve simulated ground motions are defined for the multi-support earthquake analysis (Mp-sup). In order to easily implement multi-point earthquake excitation to the bridge, the practice-oriented procedure is summarized. The results demonstrated that the Mp-sup led to high increase in sectional forces of the critical components of the bridge, especially tower base section and tensile force of the main and back stay cables. A close relationship between the dynamic response and the behavior of the bridge under the Mp-sup was also obtained. Consequently, the outcomes from this study underscored the importance of the utilization of the multi-point earthquake analysis and the necessity of considering specifically generated earthquake motions for suspension bridges.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.1-7
• /
• 2015

Self-piercing riveting (SPR) process is gaining popularity due to its many advantages. The SPR does not require a pre-drilled hole and has capability to join a wide range of similar or dissimilar materials and combinations of materials. This study investigated the fatigue strength of self-piercing rivet joint with aluminum alloy (Al-5052) and steel (SPCC) sheets. Static and fatigue tests on tensile-shear specimens were conducted. From the static strength aspect, the optimal punching force for the specimen with upper SPCC (U.S) sheet and lower aluminum alloy(L.A) sheets was 34 kN. During static test the specimens fractured in pull-out fracture mode due to influence of plastic deformation of joining area. There was a relationship between applied load amplitude $P_{amp}$ and number of cycles N ; $P_{amp}=19588N_f^{-0.211}$ and $P_{amp}=4885N_f^{-0.083}$ for U.S-L.A and U.A-L.S specimens, respectively. U.A-L.S fatigue specimens failed due to fretting crack initiation around the rivet neck between upper and lower sheets.

• Journal of Digital Contents Society
• /
• v.8 no.2
• /
• pp.205-211
• /
• 2007

The marketing using coupons policy is using in various business departments. The coupon marketing gives advantages to consumers and stores, too. The coupon policy gives discount to consumers. The stores can reduce cost of advertisement. It activates the motivation of consumers to give his loyalty to the specific store. Although the coupon marketing has these merits, there are too many coupons in the purse of consumers. The consumers should collect their coupons in their purse. The shops have to calculate the points of each consumer's coupons differently. The processing process of coupons is too complex to manage. This paper implements the managing system to control stamps in mobile devices. "Collecting Stamp" resolves those problems and enables to manage various coupons in mobile environment.