• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• 한국전자거래학회지
• /
• 제2권2호
• /
• pp.1-30
• /
• 1997

In this research, the concept of CM (configuration management) is introduced for proper applications to the life-cycle product data management. In addition, the activities for CM - CM management and planning, configuration identification, configuration control, configuration status accounting, and configuration verification and audit - are described in detail. For the management of distributed configuration data among governments, prime contractors, and subcontractors, development environments and functions for the configuration management information system (CMIS) are proposed.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.407-410
• /
• 1998

Configuration is a set of building block processes, a series of selection and combining parts or components which composes a whole thing. A whole thing could be such a configurable object as manufacturing product, network system, financial portfolio, system development plan, project team, etc. Configuration problem could happen during any phase of product life cycle: design, production, sales, installation, and maintenance. Configuration has long been one of cost and time consuming work, because only high salaried technical experts on product and components can do configuration. Rework for error adjustments of configurations at later process causes far much cost and time, so accurate configuration is required. Under the on-line electronic commerce environment, configuration problem solving becomes more important, because component-based sales should be done automatically on the merchant web site. Automated product search, order placement, order fulfillment and payment make that manual configuration is no longer feasible. Automated configuration means that all the constraints among components should be checked and confirmed by configuration engine automatically. In addition, technical constraints and customer preferences like price range and a specific function required should be considered. This paper gives an brief overview of configuration problems: characteristics, representation paradigms, and solving algorithms and introduce CRSP(Constraint and Rule Satisfaction Problem) method. CRSP method adopts both constraint and rule for configuration domain knowledge representation. A survey and analysis on web sites adopting configuration functions are provided. Future directions of configuration for EC is discussed in the three aspects: methodology itself, companies adopting configuration function, and electronic commerce industry.

• Journal of Communications and Networks
• /
• 제3권4호
• /
• pp.317-323
• /
• 2001

Traditional configuration management involves complex labor-intensive processes performed by experts. The configuration tasks such as installing or reconfiguring a system, provisioning network services and allocating resources typically involve a large number of activities involving multiple network elements. The network elements may be associated with proprietary configuration management instrumentation and may also be spread across heterogeneous network domains thereby increasing the complexity of configuration management. This paper introduces an architecture for the self-configuration of networks (SELFCON). The proposed architecture involves a directory server, which is uses to maintain configuration information. The configuration information stared in the directory server is modeled using the standard DEN specification thereby allowing effective exchange of network, system and configuration management data among heterogeneous management domains. SELFCON associates configuration intelligence with the components of the network, rather than limit it to a centralized management station. The network elements are notified about related changes in configuration policies, based upon which, they perform self-configuration. SELFCON is able to provide automation of configuration management and also an effective unifying framework for enterprise management.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.199-200
• /
• 2017

The Configuration Management(CM) of Nuclear Power Plant(NPP) is an activity that maintains consistency among the design requirement, facility configuration information and physical configuration. It is a systematic approach to performing various engineering tasks such as change management by identifying, documenting the characteristics of plant Structures, Systems and Component(SSC). The first activity that should be performed the configuration baseline setting at the start of project. The configuration baseline of the NPP construction phase is the status of the SSC of the plant at a specified process and time, and the actual configuration changes depending on the condition of plant. In this paper, I have studied the current status of configuration baseline used in the software industry and general plant industry, method of establishment for the configuration baseline which was first applied to the construction of NPP.

• 한국국방경영분석학회지
• /
• 제28권2호
• /
• pp.95-115
• /
• 2002

Configuration management is a process that establishes and maintains consistency of a product with its requirements and configuration information throughout its life cycle. This paper deals with the improvement of configuration management for weapon system. We analyze configuration management system, organization, human resource, regulations, and automated system of USA. Then we apply the ideas to our proposal for the improvement of configuration management. The proposal for the improvement of configuration management consists of three parts. The first one is the improvement of configuration management for weapon system by R&D, the second one is the improvement of configuration management for weapon system by foreign acquisition, and the last one is the improvement of configuration management in the aspects of organization, human resource, regulations, and automated system. This paper will be contributed to the activation of configuration management system and the efficiency of acquisition project management.

• 대한화학회지
• /
• 제20권2호
• /
• pp.111-117
• /
• 1976

Methyl benzamidoxime의 C=N 결합에 의한 configuration 과 N-O 및 C-N 결합에 대한 conformation 에 관하여 확장 Huckel 분자궤도법 계산을 실시하였다. 계산 결과는 C-N 결합의 conformation이 sp-형이면 E-configuration이 Z-configuration보다 더 안정하다. ap-형이면 Z-configuration이 더 안정하다. C=N 결합의 configuration과 C-N 의 conformation이 같으면 N-O의 conformation이 ap-형인 것이 더 안정하다. 이 안정화 에너지의 대부분은 정전기적인 원자간에 힘에 기인하는 것임을 밝혔다.

• 한국CDE학회논문집
• /
• 제13권4호
• /
• pp.305-313
• /
• 2008

A configuration management system was implemented by applying PLM to the defense field. The PLM system has recently been incorporated in a wide range of industries, and it has allowed for improvements in work productivity and expansion of related services by comprehensively managing and securing connection regarding configuration information in the defense field. Implementations include acquisition of configuration related information and reinforcement of BOM-oriented configuration management function, securing compatibility among 3D drawings of different agencies, improvement of drawing and document management functions, comprehensive systematic configuration management focused on product structure, strengthened configuration control functions, a management system according to the work flow and life cycle functions, an integrated configuration management system of 3D model CAD resources and an enhanced management system. This paper covers a case study reviewing the implementation of a PLM-based configuration management information system and its results, so that the information can be made available to other agencies and companies seeking to apply PLM in their organizations.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.108-115
• /
• 2019

The activities of managing and controlling the configuration of a system component over its life cycle are critical tasks in developing a high safety system as well as general system development. These configuration management activities should be defined through the management plan at the beginning of the life cycle, and should be performed continuously and systematically until the end of the project after the system or product development is completed. In this study, the configuration management process applied in the development of high safety railway signaling system was introduced and an efficient application proposals of it was proposed. In particular, configuration management through the establishment of a configuration management system based on computer tools is one of the important activities of maintaining the configuration integrity of the system or product.

• 시스템엔지니어링학술지
• /
• 제7권1호
• /
• pp.53-56
• /
• 2011

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design, development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management process, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of Technical Management process.