As a coating material for loudspeaker dampers, resilient polyurethane/epoxy hybrid resins were synthesized to replace conventional phenol resin and examined the physical properties, which are not only environmentally friendly but also not harmful to human. Five types of polyurethane resins were synthesized in the step-shot method using methylene diisocyanate, three polyols such as poly tetramethylene ether glycol(PTMEG, MW:2000), poly(1,4-buthylene adipate(PBAP, MW:2000), and poly carbonatediol(PCD, MW:2000), and three chain extenders such as ethylene glycol(EG), neopentyl glycol(NPG), and 1,4-buthandiol(1,4-BD). The five types of synthesized polyurethane resins and commercially available bisphenol A type epoxy resin were blended in weight ratios of 90:10, 70:30, and 50:50 to synthesize 15 types of polyurethane/epoxy hybrid resins. Among the polyurethane resins, the one that was synthesized using PCD and 1,4-BD showed excellent tensile strength, 100% modulus, low extension, and relatively high viscosity. Polyurethane/epoxy hybrid resins with higher epoxy resin contents showed better thermal properties and water resistance while those with higher polyurethane contents showed higher flexibility. The polyurethane/epoxy hybrid resin made by blending the polyurethane based on PCD and 1,4-BD with a bisphenol A type epoxy resin in a weight ratio of 70:30 was identified to be the most suitable to be used in speaker dampers.
This study was conducted to develop the objective evaluation method for tobacco smoke. The evaluation was carried out by using the data of cut or blended tobacco components, smoke components, electric nose system (ENS), and sensory test. By using the statistical methods, such as cluster analysis, discriminant analysis, factor analysis, correlation analysis, and multiple regression analysis, the relationship among the data of tobacco, smoke, ENS, and sensory evaluation was studied. By the results of cluster analysis, the data from smoke analysis by GC and ENS were able to select the difference of tobacco leaf characteristics. As the results of discriminant analysis, grouping by the components of tobacco leaves and smoke was possible and the results of GC analysis of smoke could be used for discrimination of tobacco leaves. In the results of factor analysis, nicotine, tar, CO, puff No and pH in the smoke were the factors effecting on the tobacco leaf characteristics. From the correlation analysis, aroma, taste, irritation, and smoke volume of sensory test had high relation to tar, p-cresol threonolatone, levoglucosane, and quinic acid- ${\gamma}$ -lactone of smoke. The ENS data showed high efficiency for discriminant analysis and cluster analysis, but it was not good for factor analysis, and correlation analysis. It was possible to estimate tobacco leaves and their blending characteristics by the analytical data of tobacco leaves, smoke, ENS, and sensory test results. By the multiple regression analysis, some correlation among selected chemical components and sensory evaluation were found. This study strongly indicated that the some chemical analysis data was available for the objective evaluation of tobacco sensory attributes.
살충성 O,O-diethylphenylphosphate (A)와 3,5-dimethylphenyl-O,O-diethylphosphate 유도체 (B)에 의한 acetylcholinesterase(Ach E)의 phosphorylation 반응에 미치는 정량적인 자유에너지 관계(LFER)를 알아보기 위하여 Ach E의 두 작용점인 esteratic-anionic site에 대응하는 (A) 및 (B)의 P원자 및 meta 위치간의 공간직선 거리 및 알짜전하를 확장 H$\ddot{u}$ckel이론(EHT)에 의한 MO 계산 방법으로 계산하고 여러 가지 치환기상수와 $pI_{50}$ 상수를 Hammett 및 Okamoto-Brown식, Taft와 Swaln-Lupton의 DSP식에 적용한 회귀분석 결과로부터 살충작용에 미치는 정량적인 자유에너지 관계, %R과 %F를 계산하여 검토하였다. 즉, (A) 및 (B)의 살충효과는 서로 비슷하였으며 blending coefficient (${\lambda}$)는 모두 ${\lambda}$<1의 값을 나타내었다. (A) 및 (B)의 resonance effect (%R)와 field effect (%F)는 각각 %R=33.5, %F=66.5 그리고 %R=2, %F=98로 각각 계산되었는데(B)와 같이 phenyl group에 bulky한 소수성의 methyl group이 결합될수록 resonance effect($R_{\pi}$)보다는 direct through space field effect ($F_D$)가 아닌 through space field effect가 더 크게 영향을 미치게 된다는 사실을 알 수 있었다.
본 논문에서는 uDEAS(Univariate Dynamic Encoding Algorithm for Searches)를 이용하여 두 가지의 이동 로봇 최적 전역 경로 계획을 제안한다. 이동 로봇의 자율 주행을 위해서는 빠른 시간 내에 작업 공간에서의 최적 경로를 생성해야 한다. 따라서 본 논문에서는 이동 로봇의 실시간 최적 경로 계획을 위해 전역 경로 계획을 도입하여 장애물 지역과 비장애물 지역을 확인하고, 지도상의 노드점과 노트점을 이용하여 출발 지점과 도착 지점 사이의 기본 경로를 생성한다. 그리고 기본 경로를 사용하여 두 가지의 방법으로 경로를 생성하게 된다. 첫 번째 방법은 기본 경로에서 세 개의 노드점을 이용하여 대각선 경로를 생성하는 방법이다. 두 번째는 혼합 다항식의 파라미터를 uDEAS를 이용하여 탐색하고, 곡선 궤적을 생성하는 방법이다. 시뮬레이션을 통해 두개의 방법에 대해 비교 분석하였다.
In this study, biodegradable base Li-greases were prepared by using Li-soap thickener and vegetable oils such as soybean oil, rapeseed oil, castor oil and synthetic ester. Also, EP-greases were formulated by blending base Li-greases, anti-wear additives, EP additives, anti-oxidants and corrosion inhibitor etc. And EP-greases were characterized by analysing physical properties such as worked penetration, dropping point, 4-ball wear, extreme pressure, thermal properties etc. Biodegradability of base Li-greases and EP-greases were evaluated by CEC-L-33-A-93 method using several inoculums of domestic sewage treatment plant. As the results, biodegradability of vegetable oils were shown at the range of 97.1 to $98.4\%$. And biodegradability of base Li-greases and EP-greases were $86.2\%\;\~\;89.3\%\;and\;83.4\%\;\~\;90.0\%$ which were lower value than those o( vegetable oils due to effect of Li-soap thickener, respectively. Therefore, the EP-greases prepared in this study were easily biodegraded by microorgnism.
친유기 합성 층상실리케이트(STN)의 함량(1~9 wt%)을 변화하며 폴리아믹산/STN 나노복합재용액을 DMAc 및 THF/MeOH 혼합용매에서 각각 제조하였고, 이를 폴리에스테르 필름에 코팅하여 열적 이미드화 및 화학적 이미드화 반응을 통하여 폴리에스테르/폴리이미드 나노복합필름을 제조하였다. XRD 및 TEM을 이용하여 제조된 폴리에스테르/폴리이미드 나노복합필름의 미세 구조를 조사한 결과 박리형 폴리이미드 나노복합재가 제조되었음을 확인하였다. 표면의 모폴로지 변화는 AFM을 통하여 확인하였으며, 열적 및 기계적 특성은 TGA, DMA와 UTM을 통하여 측정하였다. 또한 STN이 첨가됨에 따라 폴리에스테르/폴리이미드 나노복합필름의 수분투과도는 감소하였고, 화학적 이미드화에 의해 제조된 필름이 열적 이미드화에 의한 필름에 비해 좀더 우수한 수분 차단성을 보였다. 또한 상대적으로 비점이 낮은 THF/MeOH 혼합용매 시스템의 경우가 DMAc를 용매로 사용한 경우보다 더 향상된 수분 차단성을 보였다.
For comparison with conventional barium-gastrointestinal study, modified method using barium and methylcellulose was performed in 16 normal dogs (4-8 kg) divided into two groups. The group 1 received 8ml/kg of 40% w/v barium suspension only, and group 2 had taken 15 ml/kg of 0.6% w/v methylcellulose after administration 4 ml/kg of 40% w/v barium suspension by feeding tube. The barium suspension was prepared mixing full strength-barium suspension with water and methylcellulose solution was produced by blending methylcellulose sterilized water Sequential radiographs, lateral and ventrodorsal projections were obtained at 5 minute, 20 minute,40 minute. 60 minute and every 30 minutes thereafter, until the contrast is seen in the large intestine Inage qual- ity was rated by three veterinary radiologists as " poor" " fair ". "good", or "excellent" We analyzed the relationship between image quality,, transit time. Between two techniques, the modified method with 4ml of 40% w/v barium suspension and 15 ml of 0.6% w/v methylcellulose showed much better image quality ["excellent" result in 7 of the 8 subjects (88%)] and shorter transit time (107 minutes) toe the cecum. In addition, the best image quality was obtained at 20 and 40 minutes after admin-istration of contrast agent. It call be concluded the modified gastrointestinal study using methylcel-lulose after administration of barium suspension was a simple technique and easily improved the image quality and diagnostic accuracy of gstrointestinal disorders in small animal.racy of gstrointestinal disorders in small animal.
In this research, anode for SOFC has been manufactured from two different kinds of feedstock materials through thermal spraying process and the properties of the coatings were characterized and compared. One kind of feedstock was manufactured from spray drying method which includes nano-components of NiO, YSZ (300 nm) and graphite. And the other is manufactured by blending the micron size NiO coated graphite, YSZ and graphite powders as feedstock materials. Microstructure, mechanical properties and electrical conductivity of the coatings as-sprayed, after oxidation and after hydrogen reduction containing nano composite which is prepared from spray-dried powders were evaluated and compared with the same properties of the coatings prepared from blended powder feedstock. The coatings prepared from the spray dried powders has better properties as they provide larger triple phase boundaries for hydrogen oxidation reaction and is expected to have lower polarization loss for SOFC anode applications than that of the coatings prepared from blended feedstock. A maximum electrical conductivity of 651 S/cm at $800^{\circ}C$ was achieved for the coatings from spray dried powders which much more than that of the average value.
3D 얼굴 모델링은 33공간에서 얼굴을 자유롭게 회전 시켜 다양한 얼굴 자세를 표현하고 조명 효과도 적절하게 모델링 할 수 있으므로, 얼굴 자세, 조명, 표정 등의 표현에 있어서 2D 얼굴 모델링에 비해 보다 정교하며 사실감이 뛰어나 얼굴 인식, 게임, 아바타 등에서 많은 요구가 존재한다. 본 논문에서는 3D 변형 가능 형상 모델에 기반을 둔 3D 얼굴 모델링 방법을 제안한다. 제안된 3D 얼굴 모델링 방법은 먼저 3D 스캐너를 통하여 획득한 3D 얼굴 스캔 데이터를 이용하여 3D 얼굴 변형 가능 형상 모델을 구축한다. 다음, 3D 얼굴 모델링을 하고자 하는 얼굴의 2D 이미지 시퀀스로부터, 해당 얼굴의 특징점들을 검출하고 이들을 매칭하여, 매칭된 특징점들로부터 인수분해 기반 SfM 기법을 이용하여 해당 특징점의 3D 버텍스 좌표 값을 구한다. 이후, 구한 3D 버텍스들을 3D 변형 가능 형상 모델에 정합하여 해당 얼굴의 3D 형상 모델을 얻는다. 또한, 2D 얼굴 이미지 시퀀스들로부터 뷰 독립적인 2D 원통 좌표 텍스쳐 맵을 구하고 이를 이용하여 3D 형상 모델을 렌더링 함으로써, 최종적으로 3B 얼굴 모델을 완성한다. 제안된 3D 얼굴 모델링 방법에 의한 3D 얼굴 모델 생성 과정을 통해서, 본 논문에서 제안한 3D 얼굴 모델링 방법이 기존의 얼굴 모델링 방법들에 비해 상대적으로 빠르고 비교적 정교하게 수행됨을 볼 수 있었다.
그래픽스 하드웨어가 급속도로 발전해왔음에도 불구하고, 복잡한 전경을 실시간으로 렌더링하는 것은 중요한 문제로 남아 있다. 최근 이미지 기반 렌더링에 대한 연구가 활발히 진행되면서 렌더링 후 3차원 와핑에 기반을 둔 렌더링 기법들이 제시되었다. 이러한 방법들은 좋은 결과를 산출하지만, 적지 않은 계산량을 요구하며, 또한 3차원 그래픽스 가속기 상에서 구현하기가 어렵기 때문에, 실시간 문맥에 사용하기가 용이하지가 않다. 본 논문에서는 이러한 문제를 해결하기 위하여 투영 텍스춰 기법에 기반을 둔 3차원 와핑을 통한 실시간 렌더링 기법을 제시한다 이 방법에서는 복잡한 물체를 약간의 시간 차이를 두고 렌더링한 두 장의 참조 영상을 원래의 모델을 단순화시킨 물체에 각각 투영하여, 그 결과 영상을 혼합함으로써, 중간 시간에 대하여 원래의 물체를 렌더링한 것과 같은 우수한 화질의 영상을 빠르게 생성할 수 있다. 이 기법은 3차원 게임이나 가상 현실과 같은 실시간 그래픽스 응용 소프트웨어를 개발하는데 유용하게 쓰일 수 있을 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.