• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.134-139
• /
• 2008

This research investigated variations of the engine performance and the exhaust emission characteristic of a direct injection diesel engine by fueling a commercial diesel fuel, which was blended with the di-ether group (butyl-ether: BE). The smoke emission reduced to 26% from the diesel engine with the blending fuel (diesel fuel 80 vol-% + BE 20 vol-%)at the full engine load of 2500 rpm compared to it with the diesel fuel only. The power, torque and brake specific energy consumption of the diesel engine showed very slight differences. The NOx emission from the diesel engine, however, with the blended fuel was higher than with the commercial diesel fuel only. By applying EGR method, as a counter plan of the NOx reduction, this research obtained reductions of the smoke and NOx emission at the same time from the diesel engine with the BE blended diesel fuel.

• 복식문화연구
• /
• 제19권5호
• /
• pp.1061-1074
• /
• 2011

This study was conducted based on a comparative analysis of design-specific features prevalent in the Women's Wear Collection S/S 2011. As the method of this study, the denim styles were classified by various fashion design factors consisting of silhouette, fit, color, and textile fabric, which were extracted from an image database. The properties of denim fabrics associated with each fashion image were investigated to inform fabric development and washing. The results of the study show that the dense and glossy surface of the denim fabric represent a modern trend, which can be achieved by blending lyocell, tencel and rayon or by using different textiles, such as lightweight plain weave and satin instead of twill. For casual look, various washing effects were utilized jean's casual feeling like freedom and activities, while in a modern image, washing effects was restricted. And a glossy textile offers a simple modern look. The Modern image represents a simple H-silhouette and wide or straight fit in bottoms as well. Brightness can be adjusted by washing-induced bleaching. High brightness gives an elegant image, while low brightness makes a casual image. The purpose of this study is to configure a database for the development of design in the growing women's casual wear market. In addition, This study, in which the elements for specific fashion image-making were analyzed, can be used as a reference for developing denim style and fabric.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.29-34
• /
• 1995

Silicone softner(SSN-3) for permanent press(PP) finish was prepared by blending beef tallow hardened oil for Improving softness, water, the emulsion, which was synthesized from pentaerythritol monostearate as a softening component and silicone oil KF-96 as a lubricating component. The prepared SSN-3 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as crease recovery, tear strength, bending resistance test were tested. The samples treated with SSN-3 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin. Also from the bending resistance test, the two kinds of fabric samples treated with SSN-3 of 3% showed grade 5 and these were good enough in feeling.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.87-93
• /
• 2003

Two-component polyurethane flame retardant coatings (ATTBC) were prepared by blending polyisocyanate (TDI-adduct) with ATTBs mentioned at the previous paper. Most of the physical properties of the flame retardant coatings were comparable to those of non-flame retardant coatings. Especially, the hardness, impact resistance, and accelerated weathering resistance were remarkably improved with the increase of the content of 1,4-butanediol. Coatings containing 10 and 15 wt% 1,4-butanediol, ATTBC-10C and ATTBC-15C, were not flammable in vertical flame-retardancy test. Their char area recorded 1.1${\sim}$11.6 $cm^2$ in 45$^{\circ}$ eckel burner method.

• Composites Research
• /
• 제18권3호
• /
• pp.1-6
• /
• 2005

탄소나노섬유는 기계적, 전기적, 화학적, 열적 성질 등의 우수하고, 독특한 특성을 가진다. 이러한 탄소나노섬유의 우수한 물성에도 불구하고, 탄소나노섬유가 강화된 고분자 복합재료의 물성은 비례적으로 증가하지 않는다. 이러한 원인은 탄소나노섬유가 고분자 재료 내에 고루 분산되지 못하기 때문이다. 본 연구에서는 복합재료의 기계적 물성을 향상시키기 위해, 탄소나노섬유가 강화된 하이브리드 복합재료에 대한 연구를 수행하였다. 탄소나노섬유의 고른 분산을 위해, 초음파 분산장치를 이용한 용융 혼합방법을 이용하였고, 전자현미경(SEM)을 통해 탄소나노섬유의 분산정도를 확인하였으며, 만능시험기(UTM)를 이용하여 탄소나노섬유가 강화된 하이브리드 복합재료의 기계적 물성을 평가하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.334-338
• /
• 2009

Trifunctional epoxy resin triglycidyl paraaminophenol (TGPAP)/$CaCO_3$ nanocomposites were prepared using the melt blending method. The effects of nano-$CaCO_3$ content on the thermal behaviors, such as cure behavior, glass transition temperature ($T_g$), thermal stability, and the coefficient of thermal extension (CTE), were investigated by several techniques. Differential scanning calorimetry (DSC) results indicated that the cure reaction of the TGPAP epoxy resin was accelerated with the addition of nano-$CaCO_3$. When the nano-$CaCO_3$ content was increased, the $T_g$ of the TGPAP/$CaCO_3$ nanocomposites did not obviously change, whereas the crosslinking density was linearly increased. The nanocomposites showed a higher thermal stability than that of the neat epoxy resin. This result could be attributed to the increased surface contact area between the nano-$CaCO_3$ particles and the epoxy matrix, as well as the high crosslinking density in the TGPAP/$CaCO_3$ nanocomposites. The CTE of the nanocomposites in the rubbery region was significantly decreased as the nano-$CaCO_3$ content was increased.

• 한국전자통신학회논문지
• /
• 제4권2호
• /
• pp.116-122
• /
• 2009

본 논문에서는 얼굴 애니메이션을 좀 더 실질적으로 표현하기 위하여 한글 생성의 원리와 입 모양 형태의 유사성을 기반으로 기본 음소를 선정하고 이를 이용하는 새로운 알고리듬을 제안한다. 카메라를 통해 얻어진 특징 점 이용이 아닌, 모션 캡쳐 (Motion Capture) 장비를 사용하여 실제 입모양의 움직임 데이터를 취득하여 취득된 데이터를 지수 증,감 형태로 나타내어 발성에 대한 음소를 표현하고 연속된 음절을 표현하기 위하여 지배 함수(Dominance Function)와 혼합 함수(Blending Function)를 적용하여 동시 조음에 대한 표현을 해결하였다. 또한 음절 간의 결합 시간을 입 주변의 마커(Marker) 거리 값의 변위를 이용하여 그 기울기 값에 따라 시간 지연을 함으로 현실감 있는 사용자 입력 문자에 대한 입 모양 궤적 데이터를 생성하는 실험 결과를 보여준다.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.135-144
• /
• 2011

This study has extracted elements and related factors in the modernization of Hanok, using an evaluation method, and has also considered the possibilities of modern images using AHP analysis. As a result, first, the elements that form the urban landscape of historical and cultural environment have to be created by extracting elements from the subject standard for construction of the elements selected. As for the aspect of blending history, culture and environment, scenic and important architectural aspects were delineated. Second, based on selected components of the basic type of features and construction, roof types, vertical and horizontal elements were simulated after setting the criteria. Third, according to its historical cultural circumstances the man-made landscape and the traditional measure of the model, specific values of the elements for the formation of structures were evaluated by priority. A region characterized by old city houses constructed of objective elements can possibly be combined. In addition, a Hanok multi-family house fitted for modern life and a variety of models to develop and validate the possibility and utilization of this study can be expected.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.205-206
• /
• 2008

The transparent conductive film was prepared by bar coating method of poly (3, 4-ethylenedioxythiophene) (PEDOT) and poly (sodium 4-stylenesulfonate) grafted multi-walled carbon nanotubes (MWNT-PSS) nanocomposites solution on the polyethylene terephthalate (PET) film. In this case, multi-wall carbon nanotubes was treated by chemical methods to obtain water soluble MWNT-PSS and then blending with PEDOT. The non-covalent bonding of polymer to the MWNT surface was confirmed by Fourier transform infrared (FT-IR), thermal gravimetric analysis (TGA) and Transmission electro microscope (TEM) investigation also showed a polymer-wrapped MWNT structure. Furthermore, the electrical, transmission properties of the transparent conductive film were investigated and compared with control samples are raw PEDOT films.

• Geomechanics and Engineering
• /
• 제10권5호
• /
• pp.689-707
• /
• 2016

Soil stabilization is one of the useful method of ground improvement for soil with low bearing capacity and high settlement and unrequired swelling potential. Generally, the stabilization is carried out by adding some solid materials. The main objective of this research was to investigate the feasibility of stabilization of organic soils and sewage sludge to obtain low cost alternative embankment material by the addition of two different slags. Slags were used as a replacement for weak soil at ratios of 0%, 25%, 50%, 75% and 100%, where sewage sludge and organic soil were blended with slags separately. The maximum dry unit weights and the optimum water contents for all soil mixtures were determined. In order to investigate the influence of the slags on the strength of sewage sludge and organic soil, and to obtain the optimal mix design; compaction tests, the California bearing ratio (CBR) test, unconfined compressive strength (UCS) test, hydraulic conductivity test (HCT) and pH tests were carried out on slag-soil specimens. Unconfined compressive tests were performed on non-cured samples and those cured at 7 days. The test results obtained from untreated specimens were compared to tests results obtained from soil samples treated with slag. Laboratory tests results indicated that blending slags with organic soil or sewage sludge improved the engineering properties of organic or sewage sludge. Therefore, it is concluded that slag can be potentially used as a stabilizer to improve the properties of organic soils and sewage sludge.